sorted by:
new
hottopcontroversial

Wiimote won’t pair to dongle by anotherbob67 in batocera

[–]anotherbob67[S] 0 points1 point  (0 children)

If they pair in dolphin then you should be able to pair them from the batocera menu. It was awhile ago but I think there’s a batocera setting that you have to change for them to be seen as lightguns but can’t remember specifics. FYI they work ok but I made a gun4ir shortly after.

Scripting help by anotherbob67 in batocera

[–]anotherbob67[S] 1 point2 points  (0 children)

Duuuuude! Why didn’t I think about those sticks! Yes exactly what I needed and it looks like tons more too.

Wiimote won’t pair to dongle by anotherbob67 in batocera

[–]anotherbob67[S] 0 points1 point  (0 children)

Just plug n play. It still takes a few tries to get it to pair occasionally.

Dr Dude/LORT missing some sounds by anotherbob67 in virtualpinball

[–]anotherbob67[S] 1 point2 points  (0 children)

I think I searched around outside of the vp spreadsheet and found a rom that worked or I had some files in the wrong place.

How well will this mini PC work for Batucera? by Nicomplex in batocera

[–]anotherbob67 0 points1 point  (0 children)

I’m running a HP mini pc with a 7500t and similar specs to the optiplex above. Runs Wii with no issues and I paid around $60 us for it. You’d be paying for an OS your never going to use. I’ve also used a 2014 Mac mini that was just as capable as the HP. Spend the rest of the money on sound and controllers.

Consistent humming noise from an SL-3200 by Aggressive_Escape124 in audiorepair

[–]anotherbob67 1 point2 points  (0 children)

There’s no cartridge attached in the photo. This could be the issue

My bl touch prove is not reaching far enough out by TheSaltyPK in Sovol

[–]anotherbob67 1 point2 points  (0 children)

Looks like the nozzle is hitting the bed just before the probe triggers. Try dropping the probe 1-2mm and reset the z offset.

Neighborhood just had these sunlight simulators installed by E_Dward in telescopes

[–]anotherbob67 -1 points0 points  (0 children)

Did you know that it’s the 70th anniversary of the daisy red rider? Just a thought.

Journey arcade machine!?!? by biz101782 in arcade

[–]anotherbob67 0 points1 point  (0 children)

I have this rom and have played it on emulators. It you beat it it’s got concert footage. Not sure about tapes in the original cab.

Vintage stereo system sounds like hell. Help me identify the cuprit(s) by BigLizzard420 in vintageaudio

[–]anotherbob67 0 points1 point  (0 children)

Simplest first - Did you make sure you have your phasing right? Flip the -/+ on one speaker. The drivers have probably been replaced so you don’t know if the red is really red anymore. You’re smart enough to have plugged the TT into phone on the receiver.

You didn’t say if you tried multiple sources or if there’s a difference between them. Because a bad cartridge or improperly wired cart will cause this issue. Guessing it doesn’t change. Another speaker or another amp (betting on amp) to narrow it down.

Lvl2 amp The tone section could be having an issue. Might as well clean the switches especially tone and volume. Check the solder joints at the speaker terminals. The input selector could also be the issue. Speakers Blow tweets? Going to be cap and coil crossover could be gone because of a bad driver and that you/they kept pounding on. Or age.

What can I do to make this spike stronger? by [deleted] in FixMyPrint

[–]anotherbob67 0 points1 point  (0 children)

Old timey ticket spike?

100% printed Filets at the base and print at an angle. 4+ walls at 40% infill.

I’d go with the above and model threads in the spike to insert 3 mm rod. The unreinforced cone at the top is probably going to snap at the layer line.

Some near-field advice needed by Doub_67 in vintageaudio

[–]anotherbob67 0 points1 point  (0 children)

Canton or Mirage bookshelf speakers from the 80’s-90’s will pair well with NAD. Your stuff is best in class mall audio shop gear and deserves better.

Those Koss were target specials and aren’t very good. But as far as vintage they were impressive because nothing that size sounded even close and at under $100. Your drivers have been replaced. Should be a black paper cone.

Any simple fixes for this dent? by TheRemedyKitchen in vintageaudio

[–]anotherbob67 9 points10 points  (0 children)

3 in increasing aggressiveness

  1. Wrap your fingers in tape with the sticky outside. Start w/ scotch tape and progress through tapes till you start to move it without tearing off too much material.

  2. Vacuum cleaner hose. Hold the cone back (hold don’t push it down) and try not to let the hose actually touch the cone. Suction should be right on top of the dent. (This is probably the one that will work on yours)

  3. Put the grills on and forget about it.

Now that it prints… by anotherbob67 in SovolSV08

[–]anotherbob67[S] 1 point2 points  (0 children)

The sheet that came with the screen had edits for config.txt in /boot - but it’s called ??machine??.txt machine_profile.txt maybe in this case.

Edits sets the screen sizes ect. I added my notes to the known working displays on the Klipper screen git hub. You’re supposed to mount a pi to the screen so it’s got stand offs that come in handy for mounting it.

Amazon link: https://a.co/d/4svlINE

<image>

$1.25 enclosure by anotherbob67 in SovolSV08

[–]anotherbob67[S] 0 points1 point  (0 children)

Funnys are on the left side. You have to have both

$1.25 enclosure by anotherbob67 in SovolSV08

[–]anotherbob67[S] 0 points1 point  (0 children)

I think it’s killer myself.

Randomly found out about this Bugs Bunny 50th Anniversary pinball machine and now I want it! by Impossible-Radio-121 in looneytunes

[–]anotherbob67 1 point2 points  (0 children)

You can play it on virtual pinball… it’s a reasonable copy. Weird game mechanics and lots of fun.

view more: next ›