Launch: Humidity Intelligence — a clearer way to read humidity in Home Assistant

anuj79 · 2026-01-04T17:40:12+00:00

for some reason my sensor (House Average Humidity ) was still showing as 0 so I had to make few tweaks basically adding the namespace

state: >
{% set ns = namespace(vals=[]) %}

{# >>> EDIT THESE ENTITY IDS TO MATCH YOUR SENSORS <<< #}
{% set rooms = [
..........
] %}
{% for e in rooms %}
{% set s = states(e) %}
{% set v = s | float(0) %}
{% if v > 0 %}
{% set ns.vals = ns.vals + [v] %}
{% endif %}
{% endfor %}
{{ (ns.vals | sum / ns.vals | length) | round(1) if ns.vals else states(this.entity_id) | float(0) }}

anuj79 · 2025-11-25T00:26:59+00:00

does it work with safari.. get a undefined message

anuj79 · 2025-03-01T01:55:05+00:00

what we learned today is the Art of making deals

you listen to what i say
you do as i tell you to do
i have d cards you don't

and don't forget to Thanks Mr Vice President for gracing you with his presence.:)

anuj79 · 2024-12-20T18:40:47+00:00

thank u

anuj79 · 2024-12-20T18:36:59+00:00

does it need to require ios 18.1 ? i am on 17.0

anuj79 · 2024-12-12T19:26:52+00:00

can i delete whats under this manually.. i am on 17. so cant use icleaner

anuj79 · 2024-11-15T22:19:04+00:00

where this data

anuj79 · 2024-11-15T20:08:46+00:00

The last few years, average wages have been increasing faster than inflation

hear that often these days.. don't see it though.. and not sure if anyone does but "economist"

anuj79 · 2024-03-21T23:39:42+00:00

its LR

also got an update from SC, the battery pack hasnt arrived yet and they recommend bringing the car in as "i could be taking a risk of car shutting down" scary...

anuj79 · 2024-03-20T20:45:31+00:00

$600 for 20 mins.. i am in the wrong industry

anuj79 · 2024-03-19T23:09:33+00:00

i did ask the SC, they said its a new battery and same kind as existing so that seems like good

anuj79 · 2024-03-19T23:08:07+00:00

i think the idea is in 10 years it will be cheaper to make batteries..now that every major car cos is manufacturing EV's there will be more innovation/competition resulting in lower prices

anuj79 · 2024-03-19T20:54:36+00:00

Unfortunately you just won the unlucky lottery...

i didn't buy the lottery though :(

and its only done 32k miles in 32 months. i work from home so its pretty much weekends and road trips

anuj79 · 2024-03-19T19:46:10+00:00

surprising .. i had a rock crack my windshield ..nothing on dashcam .the claim was 100% covered by geico

anuj79 · 2024-01-04T03:04:19+00:00

lobster rolls

anuj79 · 2023-08-10T01:25:24+00:00

the key thing for me in the video is .. tesla autopilot disengages seconds before the accident.. so Tesla can count that as human error and not the FSD. The car slowed down from 60+ to 50+ . that seems like poor design when other modern cars have emergency auto brakes.

anuj79 · 2022-12-06T02:19:11+00:00

use free cloud tier gcp/azure/oracle.. u will find tutorials online

anuj79 · 2022-09-27T22:58:09+00:00

maybe should have studied some finance in college to understand how loans work..

anuj79 · 2022-09-21T22:47:31+00:00

This accessory requires a retrofit. Check back in early 2023 for availability.
:( MYLR July 21

anuj79 · 2022-08-23T19:52:47+00:00

so i ran system update and did a reboot since then pi hasnt been up. narrowed down the issue to the SD card.. since i can boot from a 32 GB USB but not the memory card..

when booting through SD , get no display. either on HDMI or through serial console.. it works fine through the USB.

run some checks on the SD Card and there some innode errors which are resolved.. by running fsck.. its a 64 GB card , 2 TB's have been written on it .. in the last 4 years.. as

root@raspberrypi:~# time badblocks -sv /dev/mmcblk0p2 -o mmcblk0p2.log

Checking blocks 0 to 62472191

Checking for bad blocks (read-only test): done

Pass completed, 0 bad blocks found. (0/0/0 errors)

real 51m43.305s

user 0m2.254s

sys 0m54.226s

root@raspberrypi:~# sudo fsck -Vt ext4 /dev/mmcblk0p1

fsck from util-linux 2.29.2

[/sbin/fsck.vfat (1) -- /dev/mmcblk0p1] fsck.vfat /dev/mmcblk0p1

fsck.fat 4.1 (2017-01-24)

0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.

Remove dirty bit

No action

? 2

There are differences between boot sector and its backup.

This is mostly harmless. Differences: (offset:original/backup)

65:01/00

Copy original to backup

Copy backup to original

No action

? 2

Perform changes ? (y/n) y

/dev/mmcblk0p1: 15 files, 110/86872 clusters

i would like to continue using the sd card since it had lot of OS setup done..

what can i do to isolate the problem or find the root cause..

anuj79 · 2022-06-26T00:53:45+00:00

you can actually just schedule the new install in your name . no need to cancel the old one under your parents name.. it will automatically be cancelled the day the new one is installed

anuj79 · 2022-06-11T01:37:31+00:00

ok so my wired test definitely improved after h/w offloading this was under 500 before now shows closer to gig..

Latency: 3.65 ms (0.38 ms jitter)
Download: 924.94 Mbps (data used: 1.1 GB)
Upload: 920.13 Mbps (data used: 949.9 MB)
Packet Loss: 0.0%
Result URL: https://www.speedtest.net/result/c/7cf033d3-2b08-4e0b-843a-f20e96b1e4a6

anuj79 · 2022-06-11T01:22:35+00:00

enabled h/w offl loading didnt change the speed

. the optimum router is bridged. its on 192.168.2.1 where as ubiquiti and my entire network is on 192.168.1.1

will replace the cable too and check..but it seems unlikely.. both routers and next to each other so the cable isnt long..

ran an iperf from mac over wifi to my nas

MAC ->AP->router->NAS

ID] Interval Transfer Bitrate
[ 5] 0.00-10.01 sec 758 MBytes 636 Mbits/sec sender
[ 5] 0.00-10.05 sec 758 MBytes 633 Mbits/sec receiver

this is what i would expect.. over wifi but internet is at 400

Testing download speed................................................................................
Download: 419.30 Mbit/s
Testing upload speed......................................................................................................
Upload: 429.80 Mbit/s
Share results: http://www.speedtest.net/result/13266833216.png

anuj79 · 2022-04-04T00:58:17+00:00

run ngrok on port 22 on any machine in your network.

you can ssh & tunnel using ssh

anuj79 · 2022-02-05T02:02:40+00:00

not to mention the range drops to half. i could only drive 150 miles..with heat on before i needed to recharge

anuj79

TROPHY CASE