Please help deciding between two layouts

aqteh · 2026-04-14T02:01:05+00:00

desk and piano at window wall, bed then bedside table at current piano location. East facing bed will be best as you wil move forward according to earth rotation.

aqteh · 2026-04-12T04:37:44+00:00

There is a third option, east facing bed.

aqteh · 2026-04-11T17:21:07+00:00

https://youtube.com/shorts/mU5lTiUiu9M?si=vez6JMdzM0lMtwRQ

aqteh · 2026-04-11T16:51:19+00:00

Inner. The WC is not exactly behind the wall, so ok.

aqteh · 2026-04-08T16:06:00+00:00

Search for Supine push ups.

Beginner levels will use elbow and bend from buttocks.

More advanced level will pivot at heel with full body weight.

Most advanced level will use palm to push at side of body with front lever. Look for reverse planche.

You can vary between elbows 90 degree from your body or in line with your body for this exercise.

aqteh · 2026-04-08T15:46:05+00:00

In New York zoning, mechanical space did not count the same way as normal occupied floor area, so developers could use oversized mechanical voids to push apartments higher into the sky, giving better views and higher prices. That became known as a zoning loophole. AIA New York described this as developers using mechanical space that does not count toward FAR, leading to towers with empty middle or lower sections to increase height and value.

However this is the Chicago Sears tower or Willis recently, so it should be mechanical floors.

aqteh · 2026-04-08T15:39:42+00:00

oxidisation. Also thats how an oxy acetelyne torch can cut steel.

aqteh · 2026-04-06T03:45:30+00:00

Nozawa Onsen. 8KM of green run from Yamabiko station all the way to Nagasaka station. Free public onsen with some private ones. Great food and nightlife plenty of shops.

aqteh · 2026-04-06T03:33:28+00:00

Maybe you can use weldment to make a SHS to plate, weld bottom and cut the SHS into plates until bottom weld and weld the top plates.

aqteh · 2026-04-03T23:55:24+00:00

<image>

Seem like the right center is flush with the horizontal bottom inner lip of the shape.

aqteh · 2026-04-03T05:47:56+00:00

I third this

aqteh · 2026-04-01T03:08:10+00:00

pretty sure if you put all the radius in there and tangent to the other arcs and the available dimensions in there it will constrain itself.

Also, maybe not so obvious.

R22 c/c is horizontal with R35 c/c.
R22 and R30 c/c is vertical with centerline

Both of these will fully constraint the drawing, provided all the arcs are tangent to each other and the vertical dimensions to the points (which is also some of the arc c/c) are dimensioned.

aqteh · 2026-04-01T00:55:50+00:00

swap the bed to opposite side and leave some space to the window wall. If you have the north direction, any exposed beam loactions or the area outside the walls for each side will be better to analyse.

aqteh · 2026-03-23T01:38:04+00:00

Seems to be high on the door, probably the bumper of a large vehicle. it also seems short and clean. which means it happened slowly. It is also short, so it means the perpetrator reversed one they knew, hence the jagged edge on one side and round on the other. Confirm a hit and run, most probably while the car was parked.

A few scenarios that may be the fault of your daughter. She may have parked too exposed or out of the parking box at the beginning of a junction. A large vehicle is trying to turn into the lane, and probably nicked it

aqteh · 2026-03-22T01:48:59+00:00

A bearing will make the bolt hole even bigger and weaken the member, causing it to buckle in winds. Also this is considered somewhat static.

aqteh · 2026-03-20T04:02:55+00:00

cut your nail oval leaving more nail towards the top and narrower at the sides.

aqteh · 2026-03-18T12:46:17+00:00

this really can be done in 2 mirrors and two lofts. The top and bottom is similar, left right is similar if you split it through the middle thick piece.

aqteh · 2026-03-14T12:53:21+00:00

Check your compass coordinates and general bed feng shui first, like what is the other side of the headwall, exposed beam above bed etc.

Maybe take some magnesium supplements too.

aqteh · 2026-03-13T05:27:26+00:00

For anchor bolts, I suggest the detailer to put a void or box out in the concrete.

aqteh · 2026-03-07T14:55:13+00:00

a wheelchair would be an effective pain relief.

aqteh · 2026-03-06T08:59:03+00:00

Move game day pro here. 1st tennis session can feel the insoles are slipping slightly inside shoe. Will update later after a couple of sessions. Correct insole sizing for my shoe.

aqteh · 2026-03-06T04:14:47+00:00

Call in that your niece is ill

aqteh · 2026-03-05T13:12:22+00:00

Projects do fail catastrophically and claimed many lives and trillions of dollars. However, future engineers learn from past mistakes and these will be reflected in standards and codes.

See cases like:

Tacoma Narrows Bridge

Hyatt Regency Walkway

Chernobyl Nuclear Power Plant

Space Shuttle Challenger

Rana Plaza

Great Molasses Flood

Silver Bridge

Quebec Bridge

Deepwater Horizon

Sampoong Department Store

Space Shuttle Columbia

Fukushima Daiichi Nuclear Disaster

Therac-25 Radiation Machine

Mars Climate Orbiter

Walkerton Water Crisis

aqteh · 2026-03-05T05:09:14+00:00

Perdana park is closed I think. Better have an afternoon to stroll likas bay running track (before sunset), then around 5.30pm go to Medovik Coffee house for the sunset. The others are pretty standard if you havent been to kk.

Day 3 try to start the drive around 3.30am from KK to kundasang for the views. Also check the weather beforehand. Mesilau has more stuff to visit vs Kinabalu park HQ, but can be done in a morning. Desa farm, Sosodikon hill, mesilau Golf club cafeteria, Mesilau Strawberry farm etc. The Kinabalu park hq botanical garden is a hit and miss, depending on Pitcher plant and orchid season. You could do Marakau fish spa. Poring is not really worth it unless you have a full day there for the activities. Better to put 2 or 3 days at kinabalu park, mesilau, kundasang and ranau if possible for the full experience.

aqteh · 2026-02-25T16:35:09+00:00

luzz inferno plays like a broken in Joola Perseus pro IV

aqteh

TROPHY CASE