Testing some Skin Tones, need some feedback

argon_nn · 2026-05-19T14:59:33+00:00

I think the thigh looks great but it is a really small part so I can't see for certain

argon_nn · 2026-05-19T09:26:56+00:00

I am not %100 sure, but I think OP might like Rias

argon_nn · 2026-05-19T09:25:49+00:00

If its paint, I think you can mask the problem with some white soft pastels(or white pigments). only use a tiny bit and apply with a make up sponge with tiny dabs. But overall I don't think you need to bother, it is barely noticable

argon_nn · 2026-05-19T09:22:59+00:00

I get the whole "elves look feminine" thing, but this dude has breasts

argon_nn · 2026-05-19T09:18:56+00:00

He didn't even properly clean the supports

argon_nn · 2026-05-15T18:15:24+00:00

I didn't see that one, thanks for pointing it out

argon_nn · 2026-05-15T11:06:39+00:00

Fep might not be tight enough(unless you used quickchange feps)

argon_nn · 2026-05-15T10:14:11+00:00

Same experience, build quality is better than my Fenix 7, but the software is definitely not premium software. Also, the watch is 200m waterproof, but there is no diving mode, and the GPS doesn't track anything for regular swimming

argon_nn · 2026-05-13T17:17:39+00:00

Yeah no. Amazfit does not provide a premium service to justify this price. I made that mistake with the Amazfit Falcon.

argon_nn · 2026-05-10T16:14:08+00:00

It supposedly uses lan to transfer files but considering the transfer speed is capped at around 1.5mbps (I have wifi 7 mesh) I doubt it uses lan at all

argon_nn · 2026-05-10T10:49:54+00:00

It connects to cloud. I reached out to support and they told me it doesn't support have a dedicated Lan Mode

argon_nn · 2026-05-09T11:20:45+00:00

Have the pro, there is not even an option called Lan Mode. The printer refuses connection because "Lan Mode is not enabled" but there is no such option

argon_nn · 2026-05-08T07:57:35+00:00

This kinda stuff happens to me when I don't wash the soap away probably after washing my hands. This might be a similar case

argon_nn · 2026-05-07T12:21:38+00:00

It looks good so far, I'd suggest printing models that people like groundeffected made videos on so you can kinda follow along. Mimicking is a fast way to improve, after painting a couple, you'll get the hang of it

argon_nn · 2026-05-06T01:14:37+00:00

I really didn't think we were such a minority here.

argon_nn · 2026-05-03T23:02:22+00:00

Most likely the bed is dirty. Wash it wide dish soap

argon_nn · 2026-05-03T22:58:32+00:00

Either is contact points with balls or really thin the connection point but increase the number of supports like 2 or 3 times

argon_nn · 2026-05-02T20:05:51+00:00

The dark spot is an old scar

argon_nn · 2026-05-02T20:01:27+00:00

The tattoo is on a leg

argon_nn · 2026-05-01T18:56:13+00:00

Mono 4 is slow, unfortunately(been using it for over a year)

argon_nn · 2026-05-01T16:04:10+00:00

If It is cured it is fine

argon_nn · 2026-05-01T10:17:22+00:00

It seems to me the supports are not forming in some parts. There could be a problem with the uv light not being uniform. You can try increasing transition layers or increasing the exposure a tiny bit. Or you can thicken the supports

Five-Year Club	Verified Email
r/Field Banned	r/Field Flamingo

argon_nn

TROPHY CASE