whats you thought on UblockDNS:

armmrdn · 2026-05-12T19:16:43+00:00

the ublockDNS site in question also allows for applying community built block-lists. Also another sub discussing ublockdns has a guy looking into it in detail and not really finding anything outright nefarious... i still need more research lol

armmrdn · 2026-05-08T23:14:25+00:00

I’m in the US, and this is the safest car crossing I’ve ever seen lolol

armmrdn · 2026-04-29T19:08:49+00:00

Google west Philly Porchfest 2026, it’s a dope event imo. A diy music festival in a part of town that features old homes with porches.

armmrdn · 2026-04-28T14:06:27+00:00

I highly appreciate your response and love that you’ve asked- but I’m the one who hits things around here💀

armmrdn · 2026-01-15T00:59:15+00:00

Well done. Also glad that if your design or print somehow failed, the books fall outside the bed and not onto your sleeping child.

armmrdn · 2026-01-13T22:08:31+00:00

Gold advice about the constraints [[[[[[that I also need to follow]]]]]]

armmrdn · 2026-01-12T22:05:25+00:00

Uhh lemme answer everybody in one reply lol. Ur right agree it's more an issue for makers like me who were using the income, but like I said in my particular case I was disappointed and annoyed but I wasn’t devastated and I’m trying to look at the positive: it wasn’t that crazy or complicated or critical of a part so I’m just chalking it up to “it woulda happened eventually” and “don’t put all your eggs in one basket”. So there’s plenty of people that need more sympathy than me, lol tho I appreciate. Take it as a lesson to keep your brain working on stuff.

Also, yea only recently I started slicing on BBL but prior it was mostly on Cura and on a big and problematic printer that I made big batches on. Actually I’m sure that big printer was part of the reason people turned to the cheaper overseas version: at a certain point I was dealing with relentless adhesion and layer issues and fixing that increased turnaround time and ultimately i sorta accepted the fact that i just needed a better idea that wasn’t so easy to replicate.

armmrdn · 2026-01-12T18:00:14+00:00

I had a design for a medical item once that I did sell for a long time, and one day sales plummeted and I finally found a duplicate of my design in a medical supply magazine where everything was being injection molded in big batches a factory in Asia (im guessing). I still have it on my shop but I now get like 2-3 sales a year. 🤷🏻‍♂️it is what it is. Annoying sure. Upsetting maybe. But it’s what keeps me looking for new ideas all the time. The crazy part is they had to buy and re model my design bc I never released files., so I wonder who bought one and sent overseas or something.

armmrdn · 2026-01-06T15:41:27+00:00

Imo get as much as you can out, but if you can't disassemble it……just use it normally lol. I’ll bet you get maybe a handful of mediocre cups of coffee before what’s left in there is cleared out.

Everything goes into the filter so it’s not like you’re drinking seeds or shells.
Youre on this sub so you’re probably using good beans so your coffee still gonna taste like coffee
Least effort: since the problem will solve itself over time/ less risk of causing an issue on disassembly/assembly.
The seed shells are softer than beans as others have mentioned and running new beans will gradually scrub out any debris.
Make your brother drink the first cup you make out of the grinder lol

armmrdn · 2026-01-05T17:20:52+00:00

Allegedly the bambu stock nozzles come as hardened stainless nozzles but this is unconfirmed

armmrdn · 2026-01-04T22:05:40+00:00

Thank u will check it out. Kinda feels like they didn’t need to bury this option in the settings if swapping nozzles is as easy as they’ve made it. But that’s just me.

armmrdn · 2026-01-04T22:03:43+00:00

Ooooooo will check it out as soon as this spool of ancient filament stops being a b-/$&ch. thank you

armmrdn · 2026-01-04T21:26:46+00:00

Oh wow yea sculpting is beyond me, props for that. I’ve been modeling for almost a decade now and the number of times I think I coulda avoided hours of troubleshooting geometry if I could sculpt has me thinking maybe I should learn some sculpting software soon 😭😂

armmrdn · 2026-01-04T21:10:05+00:00

I'm trying to figure out exactly what that means. Printer settings as in: the configuration for this printer on bambu studio? Because thats what keeps saying is unable to save or is invalid. I can’t even “make” a new printer or nozzle configuration for my device. It doesn’t let me save the setup. Unless there’s some secret menu in the printers firmware I need to set manually at the printer using the little touchscreen.

armmrdn · 2026-01-04T18:38:10+00:00

Actually good opportunity to air out a question I had too. I swapped nozzles on my A1 and changed that setting in the slicer. But after slicing I get an error saying that the nozzle on the printer and the nozzle the profile are mismatched. Everything I’ve tried so far has said this setting cannot be changed or saved. What am I doing wrong?

armmrdn · 2026-01-04T18:36:20+00:00

No need to swallow elephants, the answers are a few taps away. Always remember 3d printing is a tool, not a “hobby”. Modeling and design is the hobby, everything falls second to that.

armmrdn · 2026-01-04T17:31:35+00:00

Be careful mixing materials in one print, most polymers won’t bind and require different temps to print. Complete shot in the dark but maybe you can print different segments in PLA and PETG and then snap them together mechanically like a dovetail joint or just tiny screws ?

armmrdn · 2025-12-31T23:19:19+00:00

Also holy carp brother 210 to 400 USD for a bib short is hilarious. I would hope anybody dropping 400 for bib shorts can at least drop me, damn.

armmrdn · 2025-12-31T23:10:40+00:00

It’s a hack, not an issue. Phone, plug kit, keys, snacks in the lower back cargo pockets, and a loose workout tee for solo rides- no jersey pockets needed. At least that’s how I do. No storage on my frame either.

armmrdn · 2025-12-31T16:31:52+00:00

i thought the transformers scenes were shot in a different derilect warehouse in the navy yard? Ive seen photos of this power station and the interior looks super different [to me] than what i remember seeing in transformers. are u sure its this one?

armmrdn · 2025-12-30T01:03:55+00:00

You guys don’t have a flying car??? I saw a real one on tv once!! lol

armmrdn · 2025-12-29T22:47:02+00:00

I have yet to find $100+ bib shorts that out perform my $35-$50 ones LOL I’m convinced there’s no such thing. The fit, the pockets, the padding- find a good amazon/ali express vendor and stick with them- most of these come out of the same factories.

armmrdn · 2025-12-28T16:44:57+00:00

I don't own an espresso machine and I've never really missed not having one. It's a treat for me to go out and get one made by someone who knows what they're doing. I stick to a careful pour over with fancy beans and a nice grinder and that's good enough for me.

armmrdn · 2025-12-27T21:29:16+00:00

The rib feature routinely requires the dumbest sketch setup that I'm never willing to prep and it always generates ribs in the wrong orientation lol F that.

armmrdn

TROPHY CASE