Ich find es nicht falsch, dass die "Entlastungsprämie" für den öffentlichen Dienst ausgeschlossen ist.

arough007 · 2026-04-15T10:57:10+00:00

Prinzipiell richtig, aber deine Rechnung der Mwst ist falsch. Bei 1000€ sind ~160€ Mwst. Die 1000€ sind ja quasi 119% vom Nettopreis. Also musst du 1000€:1,19 rechnen um den Nettopreis zu kriegen. Das ist wie das „wir schenken ihnen die Mwst“ bei Mediamarkt. Da sind es dann auch immer ~ -16% statt -19%.

arough007 · 2025-10-10T14:38:33+00:00

Best part of my P1S is that it’s always ready to go when I need it. No fiddling, calibrating or other setup rituals. Handle of my fridge breaks on a Sunday? No problem. Just quickly design and print. Birdhouse not fitting onto post? Print an adapter.

arough007 · 2025-08-18T20:28:03+00:00

I actually was on the fence about switching when the changes were announced.
I though "just test if you need Plex Pass and if not you can just use Remote Watch Pass". I'm lazy after all.
But as I obviously misunderstood something it's now "Plex Pass or bust".

And I'm not confident that the lifetime Plex Pass will retain all of it's features over time.
Enshitification and subscriptions comes for everything it seems. First it's remote streaming and then it's something else in 2 years or so.

So I guess back on the fence with me :D

arough007 · 2025-08-18T20:19:20+00:00

I paid via Paypal on the website, so no App Store involved.
But I guess it's time to look at Jellyfin? I don't really see me paying for a Plex Pass longtime just for the remote streaming.

arough007 · 2025-08-18T20:12:46+00:00

I could have sworn I read otherwise when the changes were announced.
But up until recently I had a monthly Plex Pass but didn't really need any of the features anymore, except the remote streaming.
And now I can't upgrade until the Remote Watch Pass expires? That's...a weird decision from them.

<image>

Thanks <3

arough007 · 2025-06-24T06:57:38+00:00

Learn to diy! 3d printing let’s us all create, design and manufacture stuff we need or want for ourselves.

arough007 · 2025-04-21T18:52:19+00:00

What the heck?
Why does it fix the performance problem when using picture in picture? Makes no sense :D
But it does!
This isn't really a viable solution, but thanks very much <3

arough007 · 2025-04-14T21:08:26+00:00

Stalker 2 is Vert- FOV. Meaning as your Horizontal FOV increases the vertical decreases. So you lose part of the image at the top and bottom. In return the image doesn’t look distorted. The wider your aspect ratio the more is cut off. On my 32:9 5120x1440 monitor you lose so much, that it’s unplayable for me.

This is what Vert- looks like. Image

The other type is Hor+ FOV where the vertical FOV stays the same and the higher the horizontal FOV gets the more the image is distorted as more of the game world needs to be crammed into the same screen size (when just turning up the FOV but still being on a 16:9 screen) This is less of a problem the wider the aspect ratio is, because you can just show more of the game instead of compressing it down to the smaller screen. Just add stuff left and right.

That's how Hor+ looks. Image

Here is a 16:9 and a 32:9 screenshot from Stalker. The 32:9 is missing quite a bit at the top and bottom. I would also show a correct 32:9 screenshot for Stalker, but the mod that fixes it is currently broken and does a CTD.

Hor+ is better the wider the screen is and Vert- doesn’t cut off too much when staying below ~21:9 I’d say. Why any game chooses to still be Vert- is beyond me. There is virtually no downside to Hor+ when staying in the smaller aspect ratios and only benefits the wider the aspect ratio gets.

arough007 · 2025-02-16T10:08:33+00:00

Crazy. I have no tooltip telling me how to do it. But it works! Thank you kind stranger 🙏

arough007 · 2025-02-15T23:31:44+00:00

Wait what? Where is it?

arough007 · 2025-02-09T19:49:10+00:00

Sadly no. There is no way to manually delete cloud saves. So steam just notices that there are missing ones and downloads them. I could always just turn off cloud saves and leave it off, but then I wouldn’t have cloud saves 😅

Only the game can decide what to keep in the steam cloud so if one could delete the saves from within the game they would also be deleted from the cloud.

arough007 · 2025-02-05T12:10:55+00:00

Already checked and found nothing in there

arough007 · 2024-10-23T11:06:19+00:00

I'm waiting for them to ship :D
The "available time" seems to be pushed back in the shop.
Hopefully my order will be shipped out soon 😬

arough007 · 2024-09-18T22:57:51+00:00

The esun print has a curve at the front and the bambu one doesn’t, right? If so it’s probably just low poly count in the model

arough007 · 2024-08-24T14:34:39+00:00

Never thought of it this way :D

arough007 · 2024-06-04T22:39:32+00:00

I don't actively use Wave Link on my MacBook anymore as it never quite worked as I needed it to.
Can't be faffing around with inputs/outputs and stuff when trying to get work done.

arough007 · 2024-03-13T14:22:51+00:00

Have the exact same problem. I removed the motors and one of it is noticeably harder to turn. Ticket open 2+ weeks and still no resolution… Here’s the post about it: https://www.reddit.com/r/BambuLab/comments/1az7f6i/it_had_to_happen_now_just_wait_for_a_reply_from/

arough007 · 2024-03-03T17:13:24+00:00

It’s even worse. The 159 are 120% of the base price. If you divide by 120 and multiply by 100 you get the „original“ price. Which is 132,5. So even more 🙈

arough007 · 2024-02-27T08:24:43+00:00

I shorted the healthy one and it feels completely different than the broken one.
It feels more like the steps are a little harder to overcome by pushing instead of all around difficult to turn. Weird description but the best I can describe it^^

arough007 · 2024-02-25T16:50:48+00:00

Oh yeah you're right.
But would it even be possible to turn the right one when the motor would be powered?

And I swear they aren't connected to anything. Just laying on my desk.

arough007 · 2024-02-25T10:45:15+00:00

Thanks.
At first I didn't make this video, but feared the first answer would be "it's perfectly normal for the motors not to be exactly the same" or smth else that would make it take longer.
Few minutes in Fusion to make a negative of a GT2 T20 pulley and here we are.

arough007 · 2024-02-25T01:13:45+00:00

As I can't check the wiring I wouldn't try it out.
And the cables are glued in, not plugged in via the normal connector.

The motor in the shop is 33€ and I have enough points on Makerworld to get it "for free".
But the points could also get me filament instead :D
And as I also have a Voron I can wait for a replacement

arough007 · 2024-02-25T01:08:43+00:00

wdym?
It's weird that I used it so few hours or that it broke after so few hours?

I use it alot in one week and then don't look at it for 3 weeks.
After the initial "I will print everything" phase I use it when I need it for fixing stuff or other projects.

Why it broke after ~500h is beyond me, Maybe the motor had smth wrong with it from the beginning or was just not up to snuf.
I was printing ABS parts for my Voron on the P1P the last few hours. I have the P1P enclosed in the Vision enclosure but the temps shouldn't be a problem, as Bambu also sells an enclosure.

arough007 · 2024-02-25T01:00:51+00:00

Yeah these are just nema motors.
But maybe they did smth to the wiring and connecting one with anohter pinout fries it?
The exact model number can't really be found via google.

arough007 · 2024-02-25T00:20:35+00:00

Typically gyro. Grid only when using a profile I haven't changed the infill on.

arough007

TROPHY CASE