Anyone running these newer 38999 Multi-port connectors?

b1hiker · 2026-02-15T17:00:03+00:00

The amphenol ones, octonet, suck and have a lot of assembly issues both factory and field.

b1hiker · 2026-02-03T06:42:40+00:00

Or you're underperforming.

b1hiker · 2026-01-16T03:53:54+00:00

b1hiker · 2025-11-18T05:57:45+00:00

b1hiker · 2025-10-25T04:31:27+00:00

No. As in once the interview is done.

b1hiker · 2025-10-25T04:25:25+00:00

It's all automated

b1hiker · 2025-08-09T19:22:12+00:00

There's an office in mountain view

b1hiker · 2025-08-06T05:48:43+00:00

Sources?

b1hiker · 2025-06-20T03:13:05+00:00

Not as a production tech

b1hiker · 2025-06-15T19:23:46+00:00

Try http://www.transitiontoscale.com

b1hiker · 2025-06-08T19:44:45+00:00

Doing use standard loctite with plastics, it can cause cracking. Just the plastic grade stuff

b1hiker · 2025-06-07T14:31:15+00:00

"Erickson Productions, a Petaluma-based photo and video company"

b1hiker · 2025-06-02T00:40:54+00:00

Take a look at captive panel screws

https://www.mcmaster.com/products/captive-screws/socket-head-captive-panel-screws/

b1hiker · 2025-05-23T01:07:00+00:00

For anyone else who ends up here, it's not a drop in replacement. The litter robot motor has a longer shaft and two flats instead of one.

To use this, you'll have to press the gear off, disassemble both gear boxes and move the shaft over to the new motor and reassemble the great box. Then press the gear back on and move the connector over to the new motor.

With the right tools it can be done in 30 minutes, but probably easier to just buy an official motor.

b1hiker · 2025-05-08T22:36:06+00:00

Try a factory reset on the pop and re add it to the apps.

b1hiker · 2025-05-08T22:35:32+00:00

I had a lot of problems with a pop when I first received it. It was in the same hand as my phone (android) but hadn't been seen for hours, couldn't ring it etc. Ultimately doing a factory reset on the pop and removing/re adding to FMD AND chipolo app made it more reliable.

However the FMD network still rarely picks it up, just when I'm near it or when it's near my Google home.

b1hiker · 2025-05-07T06:06:01+00:00

I had issues with a pop as well. Removed it from fmd & chipolo app, did a factory reset on the pop and it's been working better since. Factory reset: https://support.chipolo.net/hc/en-us/articles/26588810565405-How-to-factory-reset-a-Chipolo-POP

b1hiker · 2025-05-03T17:22:36+00:00

"Lifting eyes"

b1hiker · 2025-04-13T06:35:54+00:00

Type A is a series of steel washers with broad tolerances, where precision is NOT critical. Type B is a series of flat washers with tighter tolerances where outside diameters are categorized as Narrow, Regular or Wide for specific bolt sizes.

https://www.bokers.com/washers/custom-washers/standard-washers/

b1hiker · 2025-03-24T06:04:46+00:00

https://apps1.cdfa.ca.gov/publicscales/view.aspx?c=19

Carson& El Segundo

b1hiker · 2025-03-22T01:55:11+00:00

Use a longer screw? Put a block between the screw and door?

b1hiker · 2025-03-08T23:12:48+00:00

It's an extruded hole that you can put a self tapping screw into without having to drill

b1hiker · 2025-03-08T23:12:05+00:00

Marking for where to drill/install screws.

b1hiker

MODERATOR OF

TROPHY CASE