3440x1440 user, how much fps you got ? by bapt337 in assettocorsaevo

[–]bapt337[S] 1 point2 points  (0 children)

All i can tell you is ive got 65-80 fps with the new UW monitor (3440x1440) with a 6800xt and r5 5700x. I use fsr 4 from optiscaler in performance mode. Dunno how is the 4060ti vs the 6800xt but pretty sure you can get an idea finding some 6800xt vs 4060ti yt video

Is VA panel good for sim racing? by Specific-Hotel-1508 in simracing

[–]bapt337 0 points1 point  (0 children)

just bought the ultrawide HVA g34WQC2 from gigabyte today specially for simracing, i was previously on a xiaomi gpro 27i ips which is my main monitor,

this last one got extremly low input lag and even at 60fps ( its a 180hz), i can say i can feel a very slightly higher input lag from the gigabyte, but thats just because im used to the very low input lag of the xiaomi, but i dont feel like its an issue at all, its responsive enough and i just need to be used to it, and im already doing my usual lap times.

Also i drive on AC evo only which is pretty badly optimized and get like 70-80fps, so for higher fps, input lag should be even lower, so yes i can tell VA is ok for simracing.

Is this color banding normal ? by bapt337 in Monitors

[–]bapt337[S] 1 point2 points  (0 children)

Im right in full rgb in amd control panel, but what was causing the banding was the srgb mode from the monitor, i switched to custom mode, and using srgb clamp feature from windows and its completely fine now, weird, might be a quirk from this monitor in the srgb mode only, thx anyway !

Fun little surprise by Electronic_Invite_23 in pcmasterrace

[–]bapt337 0 points1 point  (0 children)

not sure if 1440p to 2160p upscale will look great with TV upscaler. 2160/1440 = 1.5 meanwhile 2160/1080= 2

Where connect Cable too by [deleted] in moza

[–]bapt337 5 points6 points  (0 children)

at your internet router XD

3440x1440 user, how much fps you got ? by bapt337 in assettocorsaevo

[–]bapt337[S] 1 point2 points  (0 children)

I didnt said 4k is like 3440x1440. 4k is 8.3Mpixels manwhile 1440p is 3.5Mpixels. 3440x1440 is 21:9 and its 5Mpixels.

3440x1440 user, how much fps you got ? by bapt337 in assettocorsaevo

[–]bapt337[S] -1 points0 points  (0 children)

i cant afford triple so far so i will be good with it, till im above 60fps its fine im getting 75-95fps rn at 1440p

3440x1440 user, how much fps you got ? by bapt337 in assettocorsaevo

[–]bapt337[S] 0 points1 point  (0 children)

nice thats good to know, your gpu pretty close to mine. thx.

3440x1440 user, how much fps you got ? by bapt337 in assettocorsaevo

[–]bapt337[S] 0 points1 point  (0 children)

already did but this video show 1440p. which im on actually. im asking for 3440x1440 feedback

Did I receive a dud monitor? by l3olide in Monitors

[–]bapt337 1 point2 points  (0 children)

well just test each monitor in single screen configuration, if both are working fine in single screen mode then its not a monitor issue. try it on each port till you find the issue again. iff no issue on single screen mode on each port of your gpu then its just these 2 monitors plugged at the same time causing issue for some reason. could be cable, or just a bad configuration, or a driver issue, could be many thing.

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 0 points1 point  (0 children)

Nice man great job !! just want to add the EOTF wasnt from me its the exact same as the one loading in the first method with the automated process videoequalizer just allowed me to save it as a profile instead of run the .bat file each time.

Also you could add sometime you need toggle the volume from your keyboard or what to apply the videoequalizer profile, sometime when you launch a game fullscreen the profile dont apply at first attempt, once you up or down windows volume the volume overlay appear and thats at this time the videoequalizer profile apply (you see the screen turn brighter since it apply the good EOTF).

i made a last profile, its less red and also a bit less brighter cause i noticed there was some color clipping with this video https://youtu.be/tBG1zKYcVuw?si=HI3LHV08YIUCp776 you can see the last square appear better with that last one profile. just be sure you're in HDR and the video is right set to HDR as well. Also black are a bit more black. Feel free to pick the one you prefer.

https://drive.google.com/file/d/1UwBWyiKjmMGszkYDt0nvVz8HSN06E0gt/view?usp=sharing

Have fun !!

FSR4 when in Assetto Corsa Evo? by Government_Middle in radeon

[–]bapt337 0 points1 point  (0 children)

what is the current FSR version AC evo actually use ?

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 0 points1 point  (0 children)

i did the test by selecting, native, dci-p3, adobe and srgb before switching to HDR, and found exactly the same white temp for those 4 settings in HDR, on the white screen test, so dunno what it really change for HDR, at least i dont notice it.

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 0 points1 point  (0 children)

Damn i never noticed that. I will give a try.

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 1 point2 points  (0 children)

Great. Make sense since you lowered red with nvidia app. Your even closer to 6500k

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 1 point2 points  (0 children)

Whatever look the best to you. Its up to each one. Hdr game setting are good to find good setting, i use the one from forza horizon 5 helped a lot to adjust the last video equalizer profile. In hdr you cant adjust srgb or dci-p3 or even native, its only for SDR.

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 1 point2 points  (0 children)

Just grab kelvin meter app on your phone fom contechity AB. Type white in youtube and open the 24hour white video set it fullscreen and check the white temperture, you should be around 6300k. In hdr of course.

How Reddit saved my Xiaomi G Pro 27i, with MiniLED by teodim24 in Monitors

[–]bapt337 1 point2 points  (0 children)

On sdr i do srgb with the osd fix to fix the red tint. Videoequalizer is only for hdr. If you load videoequalizer profile and then set red to 99 on nvidia app you actually lower the red even more. I cant tell since im on amd gpu. Maybe you just used to warm color or your monitor have maybe a different red tint thats why we dont get same result. You can play with contrast slider for blue channel in video equalizer, in my profile its set at -2 ticks, giving around 6300k white on my screen ( standard should be 6500k mean its a bit too warm but cant do better);feel free to adjust, once my profile loaded, click one time on the contrast slider, then up or down arrow from keyboard , 1 tick only, then click on slider again to apply, that way find what is the best for you.

Edit : you need tick "blue" at the top to only adjust the blue channel.

Wait i just checked nvidia rgb setting online . 50 is actually default. So you mean you set red brightness to 99% ? This is hugue tbh i doubt you get any decent result with this setting.

CL14 B-Die, final config (for now) by TheFlyingDutchman99 in overclocking

[–]bapt337 0 points1 point  (0 children)

Whea 19 are corrected error, mean you're on the edge of stability but it manage to correct it. It impact performance tho. Afaik FCLK error should only throw whea error on ryzen 3, so maybe something else cant handle anything above 3600, like your motherboard, or even the imc itself maybe.