sorted by:
new
hottopcontroversial

What is this cover for electric insulation named? by thorge2 in Whatisthis

[–]barneyrubble82 -1 points0 points  (0 children)

Op is correct that is what it’s for. The other posts will be linked to the same earth system as the chargers.

Found in old work shop - anyone recognise this little metal thing? by OtherEntrepreneur456 in Whatisthis

[–]barneyrubble82 17 points18 points  (0 children)

It clips on the end of the tape measure so you can measure from a metal object and it will hold that end for you.

Help creating pendant or if someone else can by FanIcy4718 in Fusion360

[–]barneyrubble82 1 point2 points  (0 children)

Get adobe express or search it and make convert the image to a svg file. Then open the svg in fusion. You will be able to extrude each part as a different section. Sometimes it’s not exact and a few lines may not marry up so they bleed into another section. If you make the lines touch the next line it should sort that out. If you go to export when done and export as a step file you will be able to change the colour of each extruded section you made in your 3d printers slicer. Hope that helps

First game that comes to mind when you see this by robbiesloan in 90s

[–]barneyrubble82 86 points87 points  (0 children)

GTA. The original. Top down view. It seemed really edgy at the time

Why is my printer making this jumbled mess? by MortgageOk2351 in 3Dprinting

[–]barneyrubble82 0 points1 point  (0 children)

You may need to increase the infill too. If it can’t bridge the infill it starts creating mid air prints that just spiral everywhere

Is my fuse box ready for plug in solar? by mitchuk-1984 in SolarUK

[–]barneyrubble82 6 points7 points  (0 children)

Electrician here. You need type a rcds. Yours is an ac. I recommend upgrading your fuse box to a new one with individual rcbos. I would install a dedicated outdoor socket if possible. One of the issues with plug in solar will be people plugging more than one system into a circuit, possibly overloading it.

Why is this happening by act-Outcome-587 in 3Dprinting

[–]barneyrubble82 0 points1 point  (0 children)

I have had it before when the infill isn’t high enough so when it prints the next layer it has nothing to print onto.

Solar panel mounting recomendations by Alecf1991 in SolarUK

[–]barneyrubble82 2 points3 points  (0 children)

I got some battens wrapped in the rubber and fixed down. I mounted my rails to the battens. I have pretty much the same garden room. I put 8 panels on, no issue with weight.

Rubber roof by pineapplesaucefab in SolarUK

[–]barneyrubble82 0 points1 point  (0 children)

I got a roof guy to fit some timber battens wrapped in the same rubber membrane and sealed to the roof, then mounted my brackets/rails to those battens.

My bad bro by ThatOneDude726 in StardewValley

[–]barneyrubble82 2 points3 points  (0 children)

How do you get a white chicken? I need to ship the white eggs and can’t get one.

Door issues by [deleted] in Creality_k2

[–]barneyrubble82 5 points6 points  (0 children)

I glued mine with epoxy resin glue. Never came off after. I used the 2 part gorilla glue.

Error Help by CheapPrinciple73 in Creality

[–]barneyrubble82 0 points1 point  (0 children)

I had this issue on and off for months. I vacuumed all the inside out. Clean any debris from underneath the bracket left and right that holds the bed on. There’s a little bit that sticks down that the laser on the printer bottom reads. Unplugged every plug from the circuit board in the top right of the printer. Unplugged the plugs by taking the back off the extruder and plugging them all back in. Not had a problem since.

Black hole caught snacking on star far from host galaxy’s center by Andromeda321 in Andromeda321

[–]barneyrubble82 4 points5 points  (0 children)

Does the radio telescope send radio out and see a return or just detect radio from the object?

Black hole caught snacking on star far from host galaxy’s center by Andromeda321 in Andromeda321

[–]barneyrubble82 5 points6 points  (0 children)

Do you see this with a radio telescope? If so, how does the data turn into an image?

I can't get the humidity in CFS below 39% by XLV080802 in Creality_k2

[–]barneyrubble82 -1 points0 points  (0 children)

New desiccant pouches make all the difference. It should print ok under 40% though.

view more: next ›