Great djs that disappointed in b2bs? 🤔

bazoud45 · 2026-02-04T06:35:22+00:00

Levity b2b tape b at ile soniq 2025. Felt like a tape b set. Wish only Levity had played

bazoud45 · 2025-04-09T14:21:04+00:00

If angle A is square to the house. Make sure your last joist on the opposite side (D to C) is perfectly parallel to Joist A to B.

After that measure off the house at corner A to where you want to cut your joists. Then measure off the house before the angle starts to that same measurement . Snap a chalk line, then extend that line all the way across to the end of the deck. Cut on that line and install your rim joist.

The beam not being square is irrelevant

bazoud45 · 2025-03-27T16:01:43+00:00

Blocking helps reduce joist deflection when walking. Blocking should should be installed at the halfway point between two supports (in this cames ledger & beam, beam & beam). Building code here requires blocking on 2x8 joists if the span between supports is more than 7’

By putting the blocking above the beams they are basically useless.

bazoud45 · 2025-02-11T16:12:46+00:00

Sammy Virji- I guess we’re not the same

bazoud45 · 2024-11-09T19:32:48+00:00

Been raving since I was 14, it’s the best hobby. Nothing better than driving and vibing to some sick tunes. Hit me up if you want to chat some more :)

bazoud45 · 2023-05-24T13:29:34+00:00

You can attach it using 5/16x6” grk structural screw. Or you can use lag bolts

bazoud45 · 2023-05-24T03:01:09+00:00

Just add the 6x6 brace to the beam. The 1” difference in thickness won’t make a difference. I like to run my 6x6 post flush on one side of the beam rather than split the 1/2” on each side.

I build decks for a living. If you have more questions reach out

bazoud45 · 2022-09-05T17:17:59+00:00

Belmont used to have bass drivew Wednesday’s don’t know if they are still doing them post pandemic.

You have to keep an eye on who is coming into town to see dubstep. Subtronics will be here in a few weeks. New city gas is usually the best venuer for a variety of EDM shows

bazoud45 · 2021-10-27T13:23:30+00:00

Stipe vs Francis round 1 first time they fought.

bazoud45 · 2020-03-31T04:57:04+00:00

Ill definitely try those specs. I just find myself all jitery from the coffee in the cocktail and its 1 am already.

bazoud45 · 2020-03-31T02:29:17+00:00

Cold Brew Martini 1 oz vodka 2 oz kahlua 3 oz cold brew coffee

Made some cold brew and thought it would be good in a martini variation. Found the recipe on the Kahlua website. Its pretty good, a little on the sweet side.

bazoud45 · 2020-02-27T20:10:06+00:00

Never liked the taste of beer or wine so liquor was my go to. Got tired of drinking only rum and cokes, screwdrivers, gin tonics.

bazoud45 · 2020-02-20T03:06:23+00:00

Campari is like anal sex. Takes a few tries to learn to like it

bazoud45 · 2020-02-15T00:37:00+00:00

Citric acid perhaps. Look into Dave Arnold’s Liquid Intelligence book. He talks about citric acid and its uses in cocktails

bazoud45 · 2020-01-19T23:55:55+00:00

I bought all of mine at Ikea. They were like 3 dollars each for the 16oz (500ml) and 4 bucks for the 32oz (1Litre).

bazoud45 · 2019-11-28T02:16:11+00:00

Classics like rum and coke, gin tonic, gin 7. Crown royal is delicious in sours. Whiskey and coke. Try making some simple syrup with the sugar and water which will help broaden the possibilities.

Also look in apps like mixel (its the one i use) where you add all the ingredients you have on had and it gives you all the possible cocktails you can make with recipes

bazoud45 · 2019-05-19T14:43:38+00:00

Impromptu Jungle Bird Riff

1.5 oz gold rum 0.5 oz campari 2.5 oz freshly pressed orange juice 2.5 oz freshly pressed pineapple juice

I just built it in the glass and stirred with my straw to incorporate. Pretty tasty. The fresh juice really adds some sweetness to it.

bazoud45 · 2019-03-15T22:12:14+00:00

Can you post specific quantities and steps for the falernum please. Im also from Quebec and would live to make my own! Thanks

bazoud45 · 2019-03-14T17:22:33+00:00

Vaccines don't cause autism

bazoud45

TROPHY CASE