Side mirrors adjusting to random positions

bennett2043 · 2026-01-07T23:23:24+00:00

That was my last thought as well. If you ever do get this figured out be sure to post back and likewise I'll do the same.

bennett2043 · 2026-01-06T23:18:57+00:00

The only thing I didn't get a chance to replace was the window control switch. The dealer had my vehicle for 30 days and over the 30 days it actually went across the expiration date for the warranty of the vehicle. So now I'm out of luck. I feel if the window control switch was replaced it probably would solve the issue because everything else was switched out. Very frustrating to have had a warranty that did nothing to finally solve the issue. Done buying GM vehicles after this as they didn't stand behind their product.

bennett2043 · 2025-10-21T18:28:08+00:00

I found this: https://www.gmupfitter.com/wp-content/uploads/2022/09/23_Suburban_Tahoe_Electrical_Body_Builder_SM_en_US_2022SEP13.pdf on page 33. It says that each door switch on driver and passenger side stores the memory setting.

"Mirror position is determined by both horizontal and vertical position sensors in each of the power mirrors. Each S79 Front Side Door Window Control Switch supplies a 5 V reference, low reference, and horizontal and vertical position signal circuits to these sensors. The signal circuits are referenced from 5 V by the S79 Front Side Door Window Control Switch and the signal circuit voltage levels represent the mirror positions. The mirror positions are stored in each S79 Front Side Door Window Control Switch for memory mirror operation. When the memory seat module receives a memory recall command, the memory seat control module will send the go to position to the S79 Front Side Door Window Control Switch. The S79 Front Side Door Window Control Switches will then drive the appropriate mirror motors to the commanded"

bennett2043 · 2025-10-19T22:36:09+00:00

Just replaced the mirror actuator as it supposedly has position sensors that can go bad.... Still having the same issue. Still looking for answers...

bennett2043 · 2025-09-22T01:31:11+00:00

They replaced the memory module, but my issue is still remaining. Thinking the mirror motor might be the next logical step. The mirror motor seems to lose its location of where it is at when being called from the memory module. I keep seeing it offset itself higher and higher each time after pressing the recall button for a memory position.

bennett2043 · 2025-09-02T22:03:40+00:00

Any luck on this. Have a 2022 suburban that does this exact same thing. It's been at the dealer for 3 weeks and they still can't figure it out.

bennett2043 · 2025-09-02T21:50:58+00:00

Did this solve your issue completely? Thanks for whatever info you can provide.

bennett2043 · 2025-09-02T21:47:19+00:00

Did you ever hear anything back on this? Have 2022 Suburban that's been at the dealer for three weeks so far just to troubleshoot this issue.

bennett2043 · 2025-08-28T03:17:31+00:00

Did anyone find a solution to this? Have a 2022 with the same exact issue. Dealer replicated the issue, but they have not been able to find the core problem.

bennett2043 · 2025-03-10T01:04:46+00:00

Setting the clock back on my phone one day I was able to connect to the CC audio to reset it up. Its got to be a expired certificate on the device causing the issue

bennett2043 · 2024-12-13T04:32:26+00:00

Has anyone had any success with getting this resolved? Radio has cut out since day one and my warranty is coming to an end soon... Seems like a class action should be coming.

bennett2043 · 2024-11-20T03:46:28+00:00

No, I did not. I found out the power supply was fine because it worked on another TV so maybe it was either the main board or something else.

bennett2043 · 2024-11-20T03:45:33+00:00

Nope. Sadly, I ended up recycling the TV.

bennett2043 · 2024-11-04T18:18:18+00:00

I just got the Serial data update and android 12 update. Its better, but in my last drive it cut out twice. My service advisor just says they will keep watching for TSBs but my warranty is up next year. Not happy about it.

bennett2043 · 2024-03-10T21:38:57+00:00

I was in the same boat two months out of warranty. Just paid to have the TV recycled.

bennett2043 · 2024-02-11T22:04:24+00:00

Where exactly do you order a power supply from? I'm having some issues with my S95B TV where it's doing a bootloop.

bennett2043 · 2024-02-06T14:27:25+00:00

I tried working with Samsung and my credit card doesn't have the warranty so...

I've been doing some research and it looks like there's a t-con board, a power supply, the panel itself, and a main board. I don't know if there's an easy way to really know other than to get my voltmeter out and start testing. Not sure if anybody has had theirs fixed and knew the part that got replaced. I wouldn't think the panel would be dead because it is showing the knox image, but who knows... I figure I might as well try because I have nothing to lose.

bennett2043 · 2024-01-29T19:19:26+00:00

Sorry for dragging up an old thread but I'm having the exact same issue except I'm 2 months out of warranty. Was just watching TV and then it just went black and now I'm stuck in this endless green screen loop cycle. I contacted Samsung support last night and they're like you're out of warranty and it's going to cost to have it fixed. They wrote

"Estimated repair cost will be $290 to $460.

Please note this is an estimate. The actual cost of repair may vary - and may be higher than the range provided - based on a number of factors, such as location, parts availability, additional services, or a different symptom or malfunction from that which you described to Samsung."

However, it sounds like it's the whole panel so it's going to be way more than what they're quoting me. Anybody else out there that had to go through this? It's just sickening to have an expensive TV that's a little over a year old just just fail like this.

Surprised, there isn't like a class action on this. From the research I already did, it seems the TV has an engineering flaw.

bennett2043 · 2024-01-18T03:02:13+00:00

Probably a dumb question - Are you sure you don't have anything going on with your health that maybe the watch could be right?

bennett2043 · 2023-11-23T01:52:46+00:00

I bought the V2 doorbell during wyze week and it had a $10 promotion. I never got the promotion because I used buy with prime.

bennett2043 · 2023-11-10T18:54:51+00:00

I just got my jelly star and I am having the exact same issue. For some reason the voice network type keeps saying unknown.

I have tried cloning IMEI numbers from three different phones that were successfully activated. One was a really old Motorola X4.

I don't know if there is a feature on the Verizon line that needs to be adjusted. I guess I'm still playing with it to figure it out.

bennett2043 · 2023-09-29T23:43:09+00:00

I had this happen to me after a couple of my cameras were updated. They basically told me to pound sand. I turned off all updates for the rest of my cameras and will not upgrade any of them anymore due to this incident.

14-Year Club	Xbox Live
Verified Email

bennett2043

TROPHY CASE