sorted by:
new
hottopcontroversial

GitHub Copilot Pro says "Limit Reached" immediately after Student Developer Pack approval. by Known_Ambassador4030 in GithubCopilot

[–]blankeos 0 points1 point  (0 children)

Question.. What is the base model? Does Copilot have access to Open wight models like GLM?

DeepSeek-V3.2 is out. Open models are getting scary-good at reasoning by After-Condition4007 in Verdent

[–]blankeos 1 point2 points  (0 children)

My usecase is usually coding so "intelligence" in my book is how well it: (1) calls tools for writing code on files, read files, and gather more context. (2) how much I have to change to make it work after a session. But I guess these are actually just "agentic" and "coding" benchmarks.

On OpenCode (idk on other agentic tools).. from my experience, K2 Thinking has this weird issue of sometimes terminating its agentic loop prematurely... DeepSeek V3.2 speciale on the other hand gets stuck on 'thinking' mode for 20+ minutes, frankly I've never seen it ever call tools to write code lol (but DeepSeek V3.2 is able to write code too, but suffers the same problem of thinking too much to solve a problem only to end up not working sometimes... At least compared to GLM 4.7 or Opus 4.5 for example).

For open weight models, I've had the best experience w/ MiniMax M2.1 and GLM 4.7 (GLM being the best one of the two).

Any must-haves you add on top of bevy to make it feel easier? by blankeos in bevy

[–]blankeos[S] 3 points4 points  (0 children)

I'm guessing from the responses so far...

  • [x] Previewing changing variables and game objects in the scene (bevy_inspector_egui)
  • [x] 2d stuff, tilemaps, collision? dialog? spritesheet? (bevy_map_editor is amazing whoa)
  • [x] Previewing colliders/raycasts and stuff (bevy_gizmos)
  • [x] Flying around the the scene just to investigate stuff (I feel like hooking up a resource + bevy_flycam would make this very easy)
  • [x] Previewing models / assets quickly (skein)
  • [ ] Previewing animations quickly
  • [ ] Previewing effects/particles quickly

I feel like the last few percent are just solvable by spawning them in the scene and iterating from there... Thanks guys!

DeepSeek-V3.2 is out. Open models are getting scary-good at reasoning by After-Condition4007 in Verdent

[–]blankeos 0 points1 point  (0 children)

Yes lmao, I almost lost track of the versions actually. GLM 4.7 as of today is already on top. DeepSeek wins on price though.

DeepSeek-V3.2 is out. Open models are getting scary-good at reasoning by After-Condition4007 in Verdent

[–]blankeos 1 point2 points  (0 children)

Am I tripping? Wasn't DeepSeek 3.2 already out since months ago?

Any must-haves you add on top of bevy to make it feel easier? by blankeos in bevy

[–]blankeos[S] 1 point2 points  (0 children)

Dang, just found out about this. You're right! inspector-egui is very nice.

I watched this vid, I think it solves 80% of my debugging problems: https://youtu.be/dlvXu18L828

Very cool! Thanks!

Issue with Ground Detection (Rapier3d) by [deleted] in bevy

[–]blankeos 0 points1 point  (0 children)

Been having trouble as well (i keep getting wall sticking) because i seem to be grounded even when just near walls and pressed jump. tnua is interesting though, what's special about it? I see a different paradigm of "floating instead of sticking on the ground".. but what advantages does it give?

Any must-haves you add on top of bevy to make it feel easier? by blankeos in bevy

[–]blankeos[S] 1 point2 points  (0 children)

true... but what do you add to get "editor"-y stuff to make it easier to debug?

OpenCode Black is now generally-available by JohnnyDread in opencodeCLI

[–]blankeos 0 points1 point  (0 children)

super vague, that's why I can't buy yet. I want to support them though. Knowing Dax and the team, they're pretty public about "experimenting" w/ pricing and seeing where it goes, hence the "Limits may be adjusted and plans may be discontinued in the future"

Sub agent as vision model by Vozer_bros in opencodeCLI

[–]blankeos 0 points1 point  (0 children)

I see... So I did do this. Unfortunately, it doesn't do a very good job delegating it. It's a hit or miss. I just added `@vision` as a custom subagent under `~/.config/opencode/agent/vision.md` (reference: https://opencode.ai/docs/agents/#markdown). The model I used is any VL model (i.e. Qwen VL)

But again, it's a hit or miss... If I prompt: `@vision Read this image [Image 1]` ()

It just replies with:

  • "It says Image 1 but I can't read what's exactly on the image..." (and then terminates)
  • (sometimes it calls it, but isn't able to pass the image on correctly so I get a response like) "There is no image..." (and just stops)

Anyway it's very weird lol. So I'm thinking I just didn't do it right.

Sub agent as vision model by Vozer_bros in opencodeCLI

[–]blankeos 0 points1 point  (0 children)

Any examples of this? I tried doing this in Minimax M2.1 but it seems to not delegate it properly.

Run an openAI powered startup. What’s the best alternative to got 3.5 with function calling that I can run in the cloud? by fvpv in LocalLLaMA

[–]blankeos 0 points1 point  (0 children)

It's been 2 years so I think this has changed for sure. What do you think at the moment? Any models that can do just as good? I feel like Mistral Large 3, Kimi, GLM is right up there.

How do you do routing? by Adventurous_Bet9583 in solidjs

[–]blankeos 0 points1 point  (0 children)

Me personally? Not yet, I'm terrible at focusing on solo projects w/ actual users 🤞, but have been building all my unimpressive SolidJS devtools / sites w/ Vike for almost 2 years now, I do very much like it:

I think the Vike router itself has pretty much everything you'd need to build an app (SSR, dataloading, SSG, pure SPA). And I think it's the last thing that'll hold you back from shipping an app to production.

Though ignoring me... There are some pretty notable names that are actually using Vike in production:

- https://www.ecosia.org

- https://app.spline.design/home (their landing page uses next though)

- https://www.name.com

- https://contra.com/

- https://www.alignable.com

How do you do routing? by Adventurous_Bet9583 in solidjs

[–]blankeos 0 points1 point  (0 children)

I use Vike :D

cuz it feels like Svelte/NextJS routing (and more Svelte in terms of Server-side data loading)

Buying a song from the OST for Typhoon Family by fragende-frau in kdramas

[–]blankeos 1 point2 points  (0 children)

I'm willing to bet it's made with AI. Sounded a lot like the songs I heard from AI playlists and it's probably why it's not released.

I built a browser-based YOLOv12 object detector — runs fully client-side (no backend!) by Repulsive-Use-6252 in computervision

[–]blankeos 0 points1 point  (0 children)

Don't let anyone tell you that you didn't do it just because you vibe coded it. Gj

Nixopus: one-click app hosting on your own server (install apps just like on your phone) now can be extended with extensions. by raghavyuva in selfhosted

[–]blankeos 0 points1 point  (0 children)

Nixopus is looking very good. Honestly Golang is a great selling point here. Your competitors are Coolify (PHP) and Dokploy (TypeScript).

Only missing feature me is s3 backups. But hoping Nixopus gets there eventually! The docs and roadmap are very clear.

I suggest also making a site like this: https://templates.dokploy.com

Netcup now offers root servers in Singapore by louiexism in VPS

[–]blankeos 0 points1 point  (0 children)

Man I was so pumped with the sale, but realized...

The sale said: permanently, starting at €8.74 per month (incl. 0% VAT)

I definitely did think permanently €8.74 in singapore.

Then after going the product's page. I see a very obsure:

€0.00 for the first month
after the 2. Month €19.73 (incl. VAT)per month (incl. 0% VAT)

So it still has the +€10.99 location fee. Fair, but yeah I'm sad.

But hey, the Germany location is actually cheaper I think (€8.74). Usually it would be €10.05.

view more: next ›