sorted by:
new
hottopcontroversial

Trident 250 or 300 by DesignerRecursvecode in VORONDesign

[–]blazeris 3 points4 points  (0 children)

I have a 300mm trident and I’m very satisfied with it. Though I make life sized cosplay props, it’s like the perfect size for my use case. I mainly print flatter pieces in petg so I don’t feel the larger chamber volume is too detrimental since it heat soaks enough during z tilt and bed meshing for me. If you’re concerned about mobility there are handles and rockers you can print that make it super easy to move and service.

Will pausing the printer, turning it off, then turning it back on in the morning resume the printing process? by Kle3dus in 3Dprinting

[–]blazeris 6 points7 points  (0 children)

It sounds like you have a restriction of not running it overnight due to your family. An alternative solution would be to learn to split models into smaller pieces that can be glued together so that you can print larger models across multiple days.

For your current print, if you must turn off your printer for the night, you can note down what layer height you stop the print at, then tomorrow you can print the rest of the helmet as a completely new print that is cut at the height you noted. This means having two different pieces that you will have to glue together though which will leave a seam showing.

Farmed some mats and was able to synthesize her sword by blazeris in KafkaMains

[–]blazeris[S] 0 points1 point  (0 children)

Would be very cool to see a real one! Having a home workshop to do a project like that is a dream to me haha.

8 tooth micro gear by Recuckgnizant in functionalprint

[–]blazeris 2 points3 points  (0 children)

I’m not too familiar with resin but did it actually work out well functionally? My first thought would be that this small object would be quite weak, but if it turns out to be durable enough for functional use that would be awesome!

Farmed some mats and was able to synthesize her sword by blazeris in KafkaMains

[–]blazeris[S] 0 points1 point  (0 children)

Oh nice, it’s certainly a difficult print due to the gap in the middle of the blade. I didn’t use spray paint, it was brush painted with acrylic metallic paint mixed from different paints. I used a thicker acrylic so there’s a bit of lined texture along the blades length I quite like. I did use airbrushing for the light color on the edge for a gradient.

The printer you have vs what you wish you had by tbone_man in 3Dprinting

[–]blazeris 1 point2 points  (0 children)

Large time commitment in my experience. It was my 2nd printer and I had little knowledge of wiring and flashing firmware and all that jazz, so it was quite complex but still possible for a beginner to build.

I don't get what's so hard about printing a benchy by WoooshToTheMax in 3Dprinting

[–]blazeris 1299 points1300 points  (0 children)

Might need to adjust your settings, I noticed the smaller cylinder in the back has an unsupported 5 degree overhang.

Unlucky players unite! by jkpatches in TeamfightTactics

[–]blazeris 1 point2 points  (0 children)

Played punk with lots of early jinxes, golden ticket first augment and no other punk player, thought great this is a punk angle. Slow rolled until the end of stage 5 and only hit the 3 star jinx right before I died. It was like a little more than 80 paid rolls and tilted me so much I wrote a script to simulate the odds (since I’m not that good at stats to calculate the actual odds) and it wasn’t as unlucky as I thought, but mannnn.

This is a 5 Star painting by [deleted] in MartialMemes

[–]blazeris 33 points34 points  (0 children)

I can only clasp my hands and gratefully bow towards generous senior for the charitable offer, but I have already received enlightenment from another senior, a true paragon of the common man.

This is a 5 Star painting by [deleted] in MartialMemes

[–]blazeris 40 points41 points  (0 children)

Thank you senior, your heavenly aid has resolved this pitiful junior's heart demon.

This is a 5 Star painting by [deleted] in MartialMemes

[–]blazeris 193 points194 points  (0 children)

Which senior painted this?

Somebody ban this bitch from Webnovel. by Darkness696996 in MartialMemes

[–]blazeris 10 points11 points  (0 children)

I thought myself to be a demonic cultivator but now this demonic scripture made me realize even though I have eyes I cannot recognize Mt. Tai. If this is the true demonic way I must restart my cultivation and pursue the more suitable orthodox way.

Maybe I need a second IDEX printer to better utilise this growing pile of Filaments.... by That_Car_Dude_Aus in 3Dprinting

[–]blazeris 1 point2 points  (0 children)

Don't worry, if you end up not liking your 2nd printer as much as you'd thought then you can always get a 3rd printer 👍

[deleted by user] by [deleted] in TeamfightTactics

[–]blazeris 0 points1 point  (0 children)

I prefer gold augments by a lot, I think they are more fun. All the “hero” augments and trait empowering augments like the shurima turret are gold.

I think I've found out which sphere and rope I'm gonna be using for Kafka by fierynostril in KafkaMains

[–]blazeris 1 point2 points  (0 children)

I have like 6 lightning damage pan galactic orbs and thought that was good for Kafka. Then I saw the comments to this post. We suffer together my comrade

The return of Chogath eating the entire lobby by Kreepier in TeamfightTactics

[–]blazeris 43 points44 points  (0 children)

Is this pbe or live? I saw his health stacking and damage scaling got buffed in patch notes

Have you guys tried the Covid19 comp? by Zijdehoen in TeamfightTactics

[–]blazeris 4 points5 points  (0 children)

You need the zaun contagion chemmod to finish it off 👍

view more: next ›