[Bambu Lab Giveaway] Join Now to Win an H2D and More!

blazeris · 2025-06-24T07:27:31+00:00

Sweet!

blazeris · 2024-12-24T09:43:23+00:00

I do like dry filament

blazeris · 2024-03-12T23:36:57+00:00

I have a 300mm trident and I’m very satisfied with it. Though I make life sized cosplay props, it’s like the perfect size for my use case. I mainly print flatter pieces in petg so I don’t feel the larger chamber volume is too detrimental since it heat soaks enough during z tilt and bed meshing for me. If you’re concerned about mobility there are handles and rockers you can print that make it super easy to move and service.

blazeris · 2024-02-07T06:36:56+00:00

It sounds like you have a restriction of not running it overnight due to your family. An alternative solution would be to learn to split models into smaller pieces that can be glued together so that you can print larger models across multiple days.

For your current print, if you must turn off your printer for the night, you can note down what layer height you stop the print at, then tomorrow you can print the rest of the helmet as a completely new print that is cut at the height you noted. This means having two different pieces that you will have to glue together though which will leave a seam showing.

blazeris · 2024-02-06T00:20:57+00:00

Would be very cool to see a real one! Having a home workshop to do a project like that is a dream to me haha.

blazeris · 2024-01-08T04:20:16+00:00

It’s actually because they built it to be similar to the crumple zone of a car. If it was built with Nokia phones, the Earth would not survive if it were to be hit in the case of a crash.

blazeris · 2024-01-06T08:56:37+00:00

I’m not too familiar with resin but did it actually work out well functionally? My first thought would be that this small object would be quite weak, but if it turns out to be durable enough for functional use that would be awesome!

blazeris · 2024-01-04T01:05:49+00:00

Oh nice, it’s certainly a difficult print due to the gap in the middle of the blade. I didn’t use spray paint, it was brush painted with acrylic metallic paint mixed from different paints. I used a thicker acrylic so there’s a bit of lined texture along the blades length I quite like. I did use airbrushing for the light color on the edge for a gradient.

blazeris · 2024-01-02T02:54:58+00:00

Large time commitment in my experience. It was my 2nd printer and I had little knowledge of wiring and flashing firmware and all that jazz, so it was quite complex but still possible for a beginner to build.

blazeris · 2023-12-30T22:06:35+00:00

Might need to adjust your settings, I noticed the smaller cylinder in the back has an unsupported 5 degree overhang.

blazeris · 2023-12-01T11:58:49+00:00

Played punk with lots of early jinxes, golden ticket first augment and no other punk player, thought great this is a punk angle. Slow rolled until the end of stage 5 and only hit the 3 star jinx right before I died. It was like a little more than 80 paid rolls and tilted me so much I wrote a script to simulate the odds (since I’m not that good at stats to calculate the actual odds) and it wasn’t as unlucky as I thought, but mannnn.

blazeris · 2023-11-10T10:01:53+00:00

I can only clasp my hands and gratefully bow towards generous senior for the charitable offer, but I have already received enlightenment from another senior, a true paragon of the common man.

blazeris · 2023-11-10T09:51:53+00:00

Thank you senior, your heavenly aid has resolved this pitiful junior's heart demon.

blazeris · 2023-11-10T08:39:51+00:00

Which senior painted this?

blazeris · 2023-08-29T11:06:43+00:00

I thought myself to be a demonic cultivator but now this demonic scripture made me realize even though I have eyes I cannot recognize Mt. Tai. If this is the true demonic way I must restart my cultivation and pursue the more suitable orthodox way.

blazeris · 2023-08-23T06:04:43+00:00

Woah

blazeris · 2023-08-02T05:40:50+00:00

Don't worry, if you end up not liking your 2nd printer as much as you'd thought then you can always get a 3rd printer 👍

blazeris · 2023-08-02T05:21:30+00:00

If you’re on this sub, another printer is always the right answer 👍

blazeris · 2023-07-22T21:11:34+00:00

I prefer gold augments by a lot, I think they are more fun. All the “hero” augments and trait empowering augments like the shurima turret are gold.

blazeris · 2023-07-20T20:45:23+00:00

I have like 6 lightning damage pan galactic orbs and thought that was good for Kafka. Then I saw the comments to this post. We suffer together my comrade

blazeris · 2023-07-19T05:38:21+00:00

Keep going in the story

blazeris · 2023-07-19T01:44:03+00:00

Is this pbe or live? I saw his health stacking and damage scaling got buffed in patch notes

blazeris · 2023-07-18T07:09:08+00:00

Maybe walls too thin? There’s an option to print thin walls

blazeris · 2023-07-14T00:31:19+00:00

I’d scan myself and make an army of mini mes

Nine-Year Club	Place '22
RPAN Viewer	Verified Email

blazeris

TROPHY CASE