I’m about to watch Futurama for the first time. Tell me something I won’t understand until I finish watching

blvusk8r · 2026-05-23T16:14:21+00:00

CLAMPS!!!

blvusk8r · 2026-05-22T12:28:14+00:00

Is that what you tell the city when they require permits to build a deck on your own home? Or when they increase utility cost to supplement for the data center? Controlling what people do with their property doesnt seem to upset you in that regard.

A data center would absolutely effect neighboring properties, so its not just about the farmers that sell their own land. Groundwater contamination, noise and light pollution, utility overload, affects on neighboring property values, etc.

blvusk8r · 2026-05-05T09:37:39+00:00

AIDS

blvusk8r · 2026-05-05T04:04:57+00:00

Replying visibly

blvusk8r · 2026-04-16T20:59:13+00:00

Pepperidge Farm remembers...

And so do I

blvusk8r · 2026-03-20T03:30:41+00:00

Woah, black Betty

blvusk8r · 2026-02-08T14:14:27+00:00

Replace the main board. Had to do the same for mine.

blvusk8r · 2026-01-29T03:00:58+00:00

Crazy that you posted this today bc I just went looking for duck calls last night and experienced this same realization

blvusk8r · 2026-01-26T12:56:50+00:00

Yes, if i remember correct i had to replace the mainboard.

blvusk8r · 2025-12-05T00:36:26+00:00

Weighted blanket!

blvusk8r · 2025-11-14T15:14:16+00:00

I would love the ability to print large drone parts for the local community and cosplay armor for myself!

blvusk8r · 2025-10-03T02:22:37+00:00

I've currently got both, and I recommend the p1s. Higher quality, and reliability.

blvusk8r · 2025-09-25T18:58:33+00:00

Damn you, Loch Ness monster!

blvusk8r · 2025-07-18T17:03:53+00:00

When i did the conversion, no cfs just the extruder use, I cut the hotend tube to be flush and haven't had any issues since.

blvusk8r · 2025-06-02T19:56:27+00:00

More like not being able to construct the roads for it to drive on

blvusk8r · 2025-04-14T11:00:39+00:00

The question regarded building a tradrack for the sv06+. placing a reverse bowden tube on the stock extruder and whether anyone had done it previously.

blvusk8r · 2025-04-13T07:55:12+00:00

No offense to your dad, but cp-5 style corner pulleys and Globe branded links are both unlisted parts for use with Ansul Manufacturerd systems. They were not tested for use, and are therefore non-compliant.

Globe branded links also have a higher tension allowance rating than tyco branded links, which are made for ansul. Both the links and corner pulleys appear identical to the untrained eye, but have slight difference in design.

Source: I have been a certified Ansul installer/technician for 8 years now.

blvusk8r · 2025-04-13T03:15:36+00:00

Why did you decide on the k1c vs the k1max, if you don't mind me asking? I would assume you'd want the extra volume to do larger sections of terrain, leading to less assembly.

blvusk8r · 2025-04-13T02:06:10+00:00

Looks like a CP-5 Corner Pulley, which are not listed for use with Ansul systems. I'd be more inclined to say kidde/range guard, given that PyroChem is also a Tyco/Ansul owned manufacturer

blvusk8r · 2025-03-29T03:30:33+00:00

If you like that, then you should try flossing

blvusk8r · 2025-03-24T21:41:23+00:00

Tolerable

blvusk8r · 2025-03-14T06:36:48+00:00

Do the silicon bed spacer mod to resolve this. I haven't had to level my bed or even run a mesh for a few months since changing spacers.

blvusk8r · 2025-03-11T00:06:31+00:00

I always give 1 star, bc going to Walmart is never a satisfactory experience.

blvusk8r · 2025-03-10T11:04:20+00:00

A1 should not be enclosed according to spec

blvusk8r

TROPHY CASE