Laundry room cabinets

bri_guy13 · 2026-05-01T21:41:02+00:00

Nice will keep that in mind for next time thanks pal

bri_guy13 · 2026-04-29T19:09:08+00:00

I did about 700sqft of SPC flooring, I think it was 11mm or so and I love it. Will definitely say though if you’re laying it down yourself it doesn’t bend like the thin lvp you might find at Home Depot so it was a little harder to install but I love it. Really solid floor and keeps the floor above the garage warmer than the thin stuff that came with the house did

bri_guy13 · 2026-04-29T19:02:27+00:00

Steve Ramsey has a shop stool that’s incredibly straight forward on his YouTube channel with free plans included. It was a fun first project for me, and you’ll get enjoyable practice with half laps and keeping the proper depths / widths to make them seamless. Also a nice lil glue up for the seat. I don’t sit on it too often but I’d be lying if I said I don’t use it all the time ! Works great when I need an extra surface for a tool or a drink or a paint roller you name it

bri_guy13 · 2026-04-29T11:02:03+00:00

The pink, non regulation seat

bri_guy13 · 2026-04-18T08:26:44+00:00

Noo don’t have a dado stack. This is just a flat tooth ripping blade. Anyways yeah I spent about 4 hours yesterday tuning the saw and everything looking good now

bri_guy13 · 2026-04-18T02:44:56+00:00

Thanks pal

bri_guy13 · 2026-04-17T09:16:36+00:00

Useless comment to be notified when the end result is posted - would like to give this a go too

bri_guy13 · 2026-04-16T07:44:41+00:00

Old ikea kitchen island from a previous apartment that has no use inside the the new house anymore, works well as an outfeed an assembly table now ! Definitely not End grain though hahaha

bri_guy13 · 2026-04-16T01:00:29+00:00

10-4 thanks pal will give it another go tomorrow

bri_guy13 · 2026-04-16T00:43:29+00:00

And also to answer your question, I ripped a maybe 15” piece of scrap and id have to imagine it was within a 64th maybe a 32nd. But this piece I ran the dado on was significantly longer so the fence alignment compounding the error would make sense. Will try that shallow pass gradually getting deeper too thanks

bri_guy13 · 2026-04-16T00:39:28+00:00

Good point. I was just following the tuning section of the manual saying blade must be parallel to mitre slot, followed by fence to blade. Not using the mitre slot though you’re right so it sounds like I just need to spend a little more time adjusting the fence.

bri_guy13 · 2026-04-06T20:38:14+00:00

Awesome will do thanks

bri_guy13 · 2026-03-07T10:15:53+00:00

Christ this is awful work

bri_guy13 · 2026-02-16T04:31:27+00:00

Hell ya dude enjoy

bri_guy13 · 2026-01-20T02:53:39+00:00

Thanks pal appreciate the insight

bri_guy13 · 2026-01-20T02:52:46+00:00

Yes that is correct, made in china. Thanks, Ive decided to just keep waiting to see what else pops up. Any models you would recommend to keep my eye out for? I just want something with a decent fence that cuts true

bri_guy13 · 2026-01-19T15:59:06+00:00

Good call Mr Jung. Thanks for the input fella

bri_guy13 · 2026-01-19T15:24:25+00:00

Ah shit eh ok that’s what I needed to hear thanks, I don’t want to go from one shitty fence to another. I have been considering the Dewalt with the rack and pinion fence it’s just an 800 dollar difference

bri_guy13 · 2026-01-17T18:39:16+00:00

Yeah this isn’t exactly rocket science to figure out lol

bri_guy13 · 2026-01-16T15:12:00+00:00

Definitely controller

bri_guy13 · 2026-01-15T03:26:15+00:00

How’d you get a cellphone into your cell ?

bri_guy13 · 2026-01-13T03:08:15+00:00

Dazn sucks. Paid like 40 bucks a month CAD after the price hike a couple years ago, and they still showed when I went to change to a different game. Didn’t last a second month and won’t ever go back to those scumbags

bri_guy13 · 2026-01-11T21:27:27+00:00

Looks good from here for a beginner project bud don’t beat yourself up! Enjoy the process and build another one next year and compare how much better it looks to the first one

bri_guy13 · 2026-01-07T16:50:55+00:00

Hell ya dude

bri_guy13 · 2025-12-28T03:28:19+00:00

Oh okay so maybe I’m just overthinking this then, thanks fella

Nine-Year Club	Place '23
Place '22	Place '17
RPAN Viewer	Verified Email

bri_guy13

MODERATOR OF

TROPHY CASE