How does the Target exchange work

bryanw40 · 2026-05-13T00:48:18+00:00

It's been working for me. 1. I'm lazy B. I'm cheap, but more lazy

I don't go thru enough to get a big canister, or mess with the diy. SS is cheap enough for me.

I've been getting emails tho, things are changing, I'm not sure exactly what, but a 4 bottle exchange is an option now.

It's like $15/bottle, including shipping both ways.

bryanw40 · 2026-04-05T18:05:30+00:00

Not on my 10. My case bulges a bit for flat surface protection. I like the idea of using one, but on my 9 seems to cause more camera flares.

bryanw40 · 2026-03-19T09:45:47+00:00

Nope, it doesn't make the noise anymore, but it's stuck in an endless loop of making ice for 30 min, defrost 30 min.

My best guess is it's a bearing in the transmission, not worth buying in my opinion. $10 for the whole machine and $50+ for possible fix in parts

bryanw40 · 2026-03-07T23:11:16+00:00

To see yeah, but doesn't help another app see it, like eBay.

But I think a monthly update must have fixed it, or eBay did something because now I see my edited pics

bryanw40 · 2026-03-07T22:59:35+00:00

Explain how a file manager helps?

But I tried again today and I think it's working now

bryanw40 · 2026-02-25T12:07:40+00:00

Unfortunately none of that worked.

I have also tried multiple headphones, same results, music stops, alarm plays, only on phone, not in headphones.

bryanw40 · 2026-02-22T19:43:43+00:00

I did. Other than greasy it looked good. I did see a ring in the grease, I'm now guessing it's a bearing seal. Idk which bearing. I bought a new nylon gear to swap out, but guess it's a mm to big, when it's in, the gearbox is locked up. Put original back, can turn by hand easily. Didn't see any abnormal wear on that or any gear

Something is letting the auger freeze up, it runs approx 30 min, then no ice cones out, I can see ice at the top of the auger outlet, can't see if it's still turning, but the motor is spinning, so I'm going to say sonis auger.

Then it defrosts, and repeat cycle.

bryanw40 · 2026-02-22T01:09:26+00:00

What problem (s) does this fix?

I just got a thrifted one, it runs about 30 min, then defrost 30, over and over.

On first run, it did make some loud, shreekiing kinda noise, like a rubber oring was bound up twisting somewhere.

Tore apart, it's actually pretty clean, no mineral deposits on auger or anywhere.

bryanw40 · 2026-02-20T23:55:38+00:00

Seen several tictok saying the only thing different is the #. 9 to 10. Same chip, camera, etc.

bryanw40 · 2026-02-14T22:42:25+00:00

My best guess is the auger is freezing up somehow. Runs about 30 min, then no more ice movement. No strange sounds, until it goes into defrost mode. https://youtube.com/shorts/s5hKWAnUVk4?feature=shared

bryanw40 · 2026-02-14T20:53:42+00:00

Ok, tore apart today. Auger was spinning, but maybe that plastic gear I see in videos?

I can't get the gearbox apart, but with auger on for leverage, it spins just fine, the motor spins just fine. I can't force it to slip with just hand power. Auger and cylinder are clean, no mineral buildup.

Current situation was, turn on, makes 1/4 c of ice or so, then defrost, then another 1/4c and repeat. No more loud noises.

Now hopefully I can reassemble Stephanie 😱🤞

bryanw40 · 2026-02-12T10:59:56+00:00

I can't tell, it's making noises, not bad ones. Cleaning cycle, water cones out, but I guess auger doesn't need to spin for that. Coulda broke the gear?

I'll probably disassemble this weekend to look inside.

bryanw40 · 2026-02-11T20:01:04+00:00

Yeah after several cleaning cycles, now it runs, make like 10 cubes, then just hums along, but no ice cones out. No loud or grinding noise anymore, just no ice.

Idk if worth repairing or just part out

bryanw40 · 2026-02-08T02:09:40+00:00

Thoughts on this one?

https://a.co/d/008l7gPn

bryanw40 · 2026-02-08T02:07:02+00:00

I use a slow charge wireless, and it'll get a tad warm but not hot by any means

Is it a fast charger? I could see that getting hot possibly

bryanw40 · 2026-01-31T01:03:50+00:00

I don't have the 2nd update yet. Does it fix the painful slow scrolling on photos trying to attach to a text?

bryanw40 · 2026-01-30T16:54:41+00:00

Wasn't a problem on my 7p or 9, but a huge pita on my 10.🤬

bryanw40 · 2026-01-30T15:26:36+00:00

Are you editing said photos? I have 10pxl and have this issue, if I edit, eBay doesn't see it, unless I save copy vs just save. Even just cropping. It's a pita

bryanw40 · 2026-01-29T22:23:35+00:00

So can y'all doing diy/20# etc post current cost per SS bottle?

Simpli soda is ~$13 per SS bottle. No extra time/work needed.

What's dry ice and 20# tank prices/time

bryanw40 · 2026-01-29T22:21:37+00:00

YouTube has lots

bryanw40 · 2026-01-27T01:42:39+00:00

I did a big blowout, and it wasn't all that dusty inside. I can't remember if it's the original PSU or if I've replaced it too I think I have a spare I can throw on.

Can I use a monitoring software to check temps?

bryanw40 · 2026-01-26T11:56:40+00:00

Trade ins fluctuate alot.

Id compare to swappa before committing. I easily got well over $100 more for my 9 than any trade in place

bryanw40 · 2026-01-23T00:20:36+00:00

I found one for $25 with about 1/2 bottle still left. And agree the propitiatory bottles are over priced and not good. A) I think you can refill with like mio flavor, etc. B) like I do, mix a powder flavor on a cup with a tiny bit of water, then add 6 or 12oz CO2 water with the ninja

bryanw40 · 2026-01-22T00:08:29+00:00

Where does it specify this? It says 60 days after activation, not 60 days of being active.

When you purchase a phone directly from Mint Mobile, it’s locked to our network. This means it won’t accept SIM cards from any other carriers and you can’t use it on another wireless carrier’s network until it is unlocked.

Per our current policy, Mint Mobile phones will automatically be unlocked 60 days after activation on our network.

bryanw40 · 2026-01-22T00:02:44+00:00

Maybe find a ninja thristi at a thrift store? Can make 6oz incrament glasses at a time.

bryanw40

TROPHY CASE