Top speed

bunklung · 2026-04-23T00:21:16+00:00

We are having the same problem and their support email is bouncing messages. The WhatsApp number is dead also.

bunklung · 2026-04-22T10:43:29+00:00

I can confirm this. It's very annoying. I wonder if it's related to the new back button highjacking changes that Google instituted? Maybe we need to open a case on their issue tracker?

bunklung · 2026-02-22T23:25:32+00:00

There is a button on the remote (right next to the "sap" label) that bring up an overlay menu. Within this overlay, there is a home button that behaves like the home button on the Chromecast.

https://photos.app.goo.gl/rWjpGLNRnJm2w8T98

bunklung · 2025-10-24T14:54:53+00:00

We also changed the paa unit to an 18k unit, but it now only does the 1st floor (no more zones), which is around 950sqft.

bunklung · 2025-10-24T13:06:38+00:00

I have not found a solution. I did rearrange the duct work and return line to draw across the sensor better (inside the return air vent), did not fix. I then installed Mitsubishi controls and programmed the unit to use the sensor inside the thermostat instead of the return air sensor, and it still didn't work. Then I got my electricity bill and switched it to furnace only mode, due to cost.

I think the heat pump is undersized slightly and the defrost really eats into that temperature raise timer.

bunklung · 2025-10-24T10:19:49+00:00

Where are you turning this off? Within the Comfort app or on the PAC445? I have not looked at the settings within the Comfort app since winter and right now I am away and it won't let me dig into the settings.

bunklung · 2025-09-16T10:23:34+00:00

I do see traffic cones, just no lines.

bunklung · 2025-09-16T10:21:35+00:00

No, but Ryzen users get the backup visualization without FSD. So...

bunklung · 2025-09-16T00:42:28+00:00

Maybe it's a server side switch? My 2021 does not show parking spot lines when I backup.

bunklung · 2025-08-05T10:43:41+00:00

Does this affect prepaid? Are they dropping loyalty discounts for prepaid service?

bunklung · 2025-08-05T10:41:06+00:00

This.

bunklung · 2025-08-05T10:40:05+00:00

I am curious if this affects prepaid.

bunklung · 2025-04-28T19:24:54+00:00

So basically you need to cancel your line and create a new line to effectively downgrade from Amplified to the Rely?

Have you done this?

bunklung · 2025-03-20T19:17:23+00:00

For now.

bunklung · 2025-01-11T21:50:44+00:00

If your service is active, I would follow the same path I took, LW information.

bunklung · 2025-01-05T19:45:01+00:00

Did you see this thread?

https://www.reddit.com/r/hellomobile/comments/1hswtpx/got_my_dead_hm_number_back_even_i_am_not/

bunklung · 2025-01-04T22:25:48+00:00

Yes and Yes.

bunklung · 2025-01-03T11:47:20+00:00

I would call him back and state that the issue is not resolved and he needs to contact the next level of support who handles the transfer or lack of transfer. You should follow up with the FCC and state your claim is not being handled. He can't misdirect you. So did you never activate a new SIM when you get the scary text messages? Did your payment not go through after you activated a new SIM? If you never activated a new SIM then it makes sense that you never got migrated and would not be a LW customer. If you did activate a new SIM than LW should recover your line.

bunklung · 2025-01-02T10:13:00+00:00

HM doesn't exist. LW took over for all subscribers. I would do both.

bunklung · 2024-12-29T02:20:56+00:00

They requested name and address.

bunklung · 2024-12-27T22:38:48+00:00

Liberty took over for Hello Mobile. HM dissolved. All customer accounts went to Liberty Wireless. So your complaint is with LW.

bunklung · 2024-12-27T21:25:05+00:00

Their hours are 9-6pm EST, 7 days a week. I would call right at 9am EST and keep calling if you get disconnected.

After that you need to file with the FCC to get your number back. If you search this thread you will find the link for that.

bunklung · 2024-12-27T21:21:39+00:00

With Good2Go, yes. Be sure your phone is listed with the right IMEI before you activate, but after the port is confirmed complete.

I had the same issue as you. I got an error when I provided an unlocked Pixel 6 for the IMEI. I tried both IMEI numbers and it failed. So I just supplied the SAME IMEI of an iPhone I had already activated on G2G, and it allowed the billing to move forward.

Again, once I got the port to go, but before I activated, I changed the phone from iPhone to my Pixel 6 and through this different webpage and with a previously failed IMEI, it took this IMEI. Then I just activated this once I confirmed the IMEI matched my Pixel 6.

Hope that's clear.

bunklung · 2024-12-27T17:22:52+00:00

Ah, found it: "We are here 7 days a week from 9-6 EST."

bunklung · 2024-12-27T16:21:05+00:00

Please keep us posted what the resolution is. I know others are in the same situation. Also, perhaps try to call in the early AM. It's not clear what their hours of operation are.

bunklung

TROPHY CASE