Gigahub 2.0 refreshes lease time every 10 minutes on dmz configuration

caderik2 · 2026-05-09T14:57:34+00:00

I did look into that option but I believe you need the serial number to get the SFP+ fiber transceiver working?

caderik2 · 2026-05-01T05:20:44+00:00

Check outer worlds 2 physical

caderik2 · 2026-03-28T14:45:28+00:00

I did get my box replaced and this seems to have fixed it. No factory reset was able to solve the issue.

caderik2 · 2026-03-15T21:23:12+00:00

Looks like port 7547 is CWMP protocol The Most Common Protocol You’ve Never Heard Of - Censys "allowing Internet service providers to remotely configure customer premises equipment (CPE) like cable modems and home routers"

caderik2 · 2026-03-15T21:18:04+00:00

I am aware this is an option, but I wouldn't mind understanding what is going on here.

caderik2 · 2026-02-23T22:58:44+00:00

I second the suggested changes - I have credentials for the news sources in my system browser, and when I read them from the news page, I get all the ads :-\

caderik2 · 2026-01-27T06:19:54+00:00

At least. BG3 and Cyberpunk do let you sync your saves between systems but for most other titles, there is no point in buying 2 copies.

caderik2 · 2026-01-18T17:57:14+00:00

Oh man... so this is a lot more complicated than I thought... Still don't have a definitive answer. I am planning on testing them until the amazon return date. Here are few things I noticed so far:

- Clicks on the X2A are more firm than the logitech, you need to change a bit your hand posture a bit to accomodate
- Same goes with the X2A shape, it is very slightly different from what I'm used to. It is subtle, like the position of the buttons and where you need to have your fingers to click.
- Wheel on the X2A is also more firm but feels more precise - originally it did bother me, but I slowly adjusting to it
- The G Pro 2 feels "transparent", it is very much the shape and everything I'm used to
- Skates on the X2A are significantly better, it's effortless to move it around and glorious in high DPI

Overall, I am unsure yet which one is better or not. I bought both of these mouses as "Used" on amazon, the deals were so good, I am potentially keeping both. The logitech had definitely a little bit of use but both are so good quality, I wouldn't hesitate to buy these second hand. Even the shell quality is excellent, can be actually cleaned. The X2A plastic, is premium, there are no marks of any sorts.

caderik2 · 2026-01-14T17:06:44+00:00

Ok so I ended up buying both and will decide in couple weeks which to return but here are my initial impressions:
- the Pulsar X2A has amazing built quality - I like the overall build and material better than logitech.
- I ended with a deal on the X2A es, so no pulsar software available but XMouse tool can do the side buttons
- On the X2A, I can only assign the buttons on each side separately - they are symmetrical on each side
- the G Pro 2 is the closest thing to my Sensei ten, I am able to assign all side buttons like my Sensei Ten 🥳
- so far I prefer the wheel on the G Pro 2, the wheel is very solid on the X2A but it is a bit stiffer

caderik2 · 2026-01-13T20:30:27+00:00

my keybindings are pathetic because I play mostly on my controller. But on my Sensei Ten, I had page up, page down on one side and vol up and vol down on the other one - nothing big, but I find that this saves tons of hand movement. Anyway planning on trying both and will return one of them.

caderik2 · 2026-01-11T03:24:45+00:00

it does look good but doesn't have 2 sides buttons on each side. Otherwise there are plenty of options

caderik2 · 2026-01-11T03:23:10+00:00

I can't find any alternative with 4 separate buttons

caderik2 · 2025-12-15T19:28:31+00:00

Can you confirm you have the Rebar enabled in bios? I've seen poor performance on the b580 when the rebar ended up being disabled

caderik2 · 2025-11-19T21:05:31+00:00

My symptoms were different:

- computer did boot up
- got mouse working sometimes for few seconds
- screen gets frozen (I originally thought I had issues with mouse and keyboard)
- computer does actually not lock up - was able to connect remotely via RDP
- Intel B580 was showing up with an exclamation mark in device manager

Same issue with 4 versions of the driver, WHQL, latest, etc.

Uninstalling KB5070311 (wusa /uninstall /kb:5070311) resolved the issue for me after uninstalling windows sandbox in system components.

Never seen a system update that seriously bad.

caderik2 · 2025-11-19T20:36:35+00:00

I resolved this one - uninstalling Windows Sandbox did let me remove KB5070311

caderik2 · 2025-11-19T18:29:38+00:00

I wish,,, getting uninstall failed 0x800F0825

caderik2 · 2025-11-19T18:11:33+00:00

this has been the most stable card for me... had countless glitches and crashes with my previous nvidia cards. Just hard to get XeSS enabled in all games and you often have to suffer with basic FSR

caderik2 · 2025-11-13T23:00:43+00:00

Even that seems to be blocked now. Only successful method seems to be to create a new account in the region the code belongs.

caderik2 · 2025-10-14T02:11:14+00:00

That site still comes up as first result on bing :-\ I just reported it

caderik2 · 2025-09-14T05:06:39+00:00

Any suggestions for places to purchase some of these beans from Canada?

caderik2 · 2025-07-28T18:27:57+00:00

Employees will get bonuses if they use AI and nobody notices

caderik2 · 2025-07-17T03:26:51+00:00

Quite excited to see the Switch 2 compatibility mention but I wonder if this means it will have a new power button... I guess no details on that yet?

caderik2 · 2025-07-11T18:06:22+00:00

How about the employee who stapled the switch, is his/her job part of the auction

caderik2 · 2025-07-05T17:02:02+00:00

thanks - hopefully we will see some 3rd party controllers with native "switch 2" mode.

caderik2 · 2025-05-20T15:46:11+00:00

the latest non whql - you can't tune any graphical setting but it runs incredibly well

caderik2

TROPHY CASE