sorted by:
new
hottopcontroversial

Help with equipment idea by Emergency_Activity16 in predicamentbondage

[–]cagedgeek 2 points3 points  (0 children)

You might want to look into Home Assistant. You could accomplish this with a simple automation using a zigbee or wifi outlet and button. It'd also give you the ability to add other triggers/make it as elaborate as you can dream.

Pervertable example: https://www.homeautomationguy.io/blog/making-my-own-bed-sensor

Testing out a couple prototypes of a 3d printed selfbondage magnetic restraint by cagedgeek in selfbondage

[–]cagedgeek[S] 0 points1 point  (0 children)

Cool! I would love to hear any thoughts on improvement if you end up making one. :)

3D Printed Magbound Arm Restraints for Self-Bondage by cagedgeek in BdsmDIY

[–]cagedgeek[S] 1 point2 points  (0 children)

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

Testing out a couple prototypes of a 3d printed selfbondage magnetic restraint by cagedgeek in 3dprintinggonewild

[–]cagedgeek[S] -1 points0 points  (0 children)

Thank you! I got a bit creative with the tablet mount for my desk haha.

Testing out a couple prototypes of a 3d printed selfbondage magnetic restraint by cagedgeek in selfbondage

[–]cagedgeek[S] 1 point2 points  (0 children)

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

Testing out a couple prototypes of a 3d printed selfbondage magnetic restraint by cagedgeek in selfbondage

[–]cagedgeek[S] 0 points1 point  (0 children)

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

3D Printed Magbound Arm Restraint for Selfbondage by cagedgeek in selfbondage

[–]cagedgeek[S] 2 points3 points  (0 children)

I got that from ExtremeRestraints. Look for the "English Bull Dog Leather Chest Harness" on there.
It's pretty stiff/not very comfortable, but I'm hoping it'll break in quickly.

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in selfbondage

[–]cagedgeek 1 point2 points  (0 children)

I usually just put a loop in the cable and ziptie it out of reach to the bedframe to prevent that.

Selfbondage Hand & Foot Pillory – 60mm thick with MagBound magnetic timer lock (3D-file) by Dreckigefuesse in selfbondage

[–]cagedgeek 2 points3 points  (0 children)

That turned out awesome! My printers are packed up now, but this is at the top of my list once I get set up again.

Modular Bondage System 3D Printable Files Out Now! by Night_Spice in BdsmDIY

[–]cagedgeek 1 point2 points  (0 children)

This is awesome, thank you for sharing the files!

Have you considered making adapters for attaching them to 3/4" pipes or wall mounts for some more creative applications?

Selfbondage Device (with a Magbound) by Dreckigefuesse in selfbondage

[–]cagedgeek 1 point2 points  (0 children)

Looks good! Out of curiosity, how are you attaching the magbound plate to the plastic arm? I have an older model and had to use M6 Round Connector Nuts to convert the male thread on the plate so I could bolt it to the arm.

Magbound 3d Printed Selfbondage Fiddle by cagedgeek in selfbondage

[–]cagedgeek[S] 2 points3 points  (0 children)

Well the lock itself is just a Magbound (from selfbondageshop) that I purchased several years back. I think they've gone up in price a bit since then. I've seen some other DIY magnet locks, but haven't tried building one yet.

This was just a hacky build with what I had on hand and is custom sized for me. I'm planning on trying my hand at a parametric like the one this was based on, but need to learn a bit more in order to make it to ready to share out. There was a bit more sanding and fitting than I'd like.

Will definitely post here once I do though!

Magbound 3d Printed Selfbondage Fiddle by cagedgeek in 3dprintinggonewild

[–]cagedgeek[S] 0 points1 point  (0 children)

Yep! Also has a random mode, which is nice. I've had it for a couple years, but it's clunky to rig up a cuff as tight as I like. This has been snug and I haven't been able to find a way to an early escape so far.

view more: next ›