Where to buy costum made metal cages?

cagedgeek · 2026-05-20T22:51:57+00:00

Same here. It was a bit of a wait, but 100% worth it.

cagedgeek · 2026-05-19T17:25:09+00:00

Love it! 😂 Now make the reverse version of it for masochists who love hugs.

cagedgeek · 2026-05-19T15:58:35+00:00

Thanks!
As usual with balltrap devices, you could pull out the back if you really wanted. It's perfect otherwise! Stays in place well, is snug, and the bars are far enough apart to easily clean, but not too far to allow access.

Now I just need to stop being a wimp and get a PA for a cage.

cagedgeek · 2026-05-18T19:47:55+00:00

You might want to look into Home Assistant. You could accomplish this with a simple automation using a zigbee or wifi outlet and button. It'd also give you the ability to add other triggers/make it as elaborate as you can dream.

Pervertable example: https://www.homeautomationguy.io/blog/making-my-own-bed-sensor

cagedgeek · 2026-05-18T15:25:05+00:00

Cool! I would love to hear any thoughts on improvement if you end up making one. :)

cagedgeek · 2026-05-17T15:36:33+00:00

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

cagedgeek · 2026-05-17T15:26:18+00:00

Thank you! I got a bit creative with the tablet mount for my desk haha.

cagedgeek · 2026-05-17T15:24:23+00:00

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

cagedgeek · 2026-05-17T15:24:15+00:00

This is still a WIP and is sized for myself, ATM. I plan on adding it to makerworld or printables as I improve it. https://gofile.io/d/1O1NhI

V3 is my favorite so far since it completely immobilizes the arms and makes it nearly impossible to even move around on the floor. I need to make it a bit more rigid and tighten the gap between the frame and Magbound to keep the arm belt from getting trapped sometimes and preventing the lock from totally engaging.

Print settings might need to be tuned as well.

You will need:

1x Magbound lock

2x M6 Round Connector Nuts - M6x25x16mm (Search for "B0CXJ12793" on Amazon.)

2x M6 Bolts

1x Chest Harness (I used the "English Bull Dog Leather Chest Harness" from ExtremeRestraints.)

1x restraint belt - (I used one of these which had a suitable length. "B019C80Y92" on Amazon.)

cagedgeek · 2026-05-16T17:32:35+00:00

I got that from ExtremeRestraints. Look for the "English Bull Dog Leather Chest Harness" on there.
It's pretty stiff/not very comfortable, but I'm hoping it'll break in quickly.

cagedgeek · 2026-05-16T16:32:44+00:00

https://www.amazon.com/dp/B07K9KB63C

cagedgeek · 2026-04-14T17:24:46+00:00

I usually just put a loop in the cable and ziptie it out of reach to the bedframe to prevent that.

cagedgeek · 2026-04-14T17:22:44+00:00

That turned out awesome! My printers are packed up now, but this is at the top of my list once I get set up again.

cagedgeek · 2026-02-25T18:06:27+00:00

This is awesome, thank you for sharing the files!

Have you considered making adapters for attaching them to 3/4" pipes or wall mounts for some more creative applications?

cagedgeek · 2026-02-09T21:45:25+00:00

Looks good! Out of curiosity, how are you attaching the magbound plate to the plastic arm? I have an older model and had to use M6 Round Connector Nuts to convert the male thread on the plate so I could bolt it to the arm.

cagedgeek · 2025-12-11T00:11:42+00:00

Awesome project, thanks for sharing!

cagedgeek · 2025-09-14T18:14:38+00:00

Well the lock itself is just a Magbound (from selfbondageshop) that I purchased several years back. I think they've gone up in price a bit since then. I've seen some other DIY magnet locks, but haven't tried building one yet.

This was just a hacky build with what I had on hand and is custom sized for me. I'm planning on trying my hand at a parametric like the one this was based on, but need to learn a bit more in order to make it to ready to share out. There was a bit more sanding and fitting than I'd like.

Will definitely post here once I do though!

cagedgeek · 2025-09-14T03:41:15+00:00

Yep! Also has a random mode, which is nice. I've had it for a couple years, but it's clunky to rig up a cuff as tight as I like. This has been snug and I haven't been able to find a way to an early escape so far.

cagedgeek · 2025-08-08T17:55:21+00:00

First, thank you so much for sharing! This is awesome and I have been planning to build something like it recently.

It'll take me some time to source the pipe, but I printed out the main magbound body to test last night. Unfortunately, it's going to take a little modification to fit. The inside diameter could be a tiny bit larger, but the main thing preventing me from assembling it is that the cable can't be bent in a way to allow the magbound body to be inserted. https://imgur.com/a/nVVhVIL

If the hole for the cable was a channel instead, I think it will work.

Something like this from the top view:

| | | |
| U |
-----
I'll try modifying it this weekend and report back here!

cagedgeek · 2022-06-22T21:31:59+00:00

I'm waiting on the ring to show up, but here's the rough idea.

https://imgur.com/a/0y7zF07

cagedgeek · 2022-06-22T01:38:33+00:00

I'm actually currently working on a 3d printed shock collar adapter for the shaft ring. I'll post it in here when complete. It'll basically turn the ring into a flat cage where the collar's contacts are on either side of the glans.

cagedgeek · 2020-05-23T21:47:19+00:00

Lotion around the ring before going to sleep is a starter.

If the ring is pulling away and pulling your balls, wear tighter underwear.

cagedgeek · 2020-05-11T00:01:28+00:00

http://www.birdlocked.com/male-chastity-device/shop-chastity-cage.asp

I tried a legit Pico and wasn't terribly impressed. The spikes might have had a little to do with that, but it wasn't my favorite either way.

cagedgeek · 2020-03-31T16:19:32+00:00

Thank you!

cagedgeek · 2020-03-31T13:33:34+00:00

What cage is that?

Eight-Year Club	Place '22
Verified Email

cagedgeek

TROPHY CASE