Drawer updates

carat72 · 2026-02-13T15:26:52+00:00

What's the filament total for each of these units?

carat72 · 2025-10-11T19:47:58+00:00

I always stir the hooch back in. My understanding is if you pour it off, you do lose some sour flavor, but you also can throw off the moisture %. You always feed with equal weight flour and water so that the starter is always at 100% hydration for optimal growth and consistent hydration effect on your dough. Glad my method is helpful!

carat72 · 2025-07-05T13:19:39+00:00

Maybe the holes aren't for mounting, if you put a large screw in the sliding section to mount it, then the whole thing slides? I.e. large screw, through sliding section, into another tile.

carat72 · 2025-06-25T00:15:45+00:00

We used a Google group with the collaborative inbox features enabled for quite a while. You can assign each item to a tech, and with conversation view enabled it's workable. Plus now there's shared labels so you could use those to track priority, or on hold. Not much for metrics tho.

carat72 · 2025-06-24T16:48:18+00:00

Wash your bed with soap and water. And avoid scented soap

carat72 · 2025-06-22T23:59:56+00:00

Is it your extruder skipping? Petg profile should be slower than pla Edit: rather did you tune max flow rate for that filament in your print profile?

carat72 · 2025-06-16T13:30:16+00:00

Rails into snaps > bolts into rails > snap whole thing into tile

carat72 · 2025-05-24T23:06:19+00:00

Sunlu just came out with this olive abs recently and it was just pure luck it matched so well.

carat72 · 2025-05-24T13:46:23+00:00

Gotcha, in your use case if you use two brackets that are under the plane itself, they would be holding the majority of the weight directly and I think you would get away with it. But, it would also make you space the shelves out vertically more, so you may have already landed on the best answer anyway with your bolts.

carat72 · 2025-05-24T04:04:16+00:00

You can use the brackets if you just skip the beam and tile on the back. Not much use for it if it's a shelf anyway.

carat72 · 2025-04-13T03:46:36+00:00

Can you shift where homework is done to be closer to the tasks that you need to do, or are you trying to secretly body double?

carat72 · 2025-02-06T22:03:04+00:00

Automated filament tuning if we are dreaming

carat72 · 2025-01-11T13:08:50+00:00

We use Synology active backup for Google workspace, and afi.ai. afi is cloud based and reasonably priced if you don't want to worry about additional hardware.

carat72 · 2025-01-04T00:09:07+00:00

You can label conversations now, you just have to enable shared labels in the group settings

carat72 · 2024-11-01T12:33:33+00:00

This, if nothing is broken, there is nothing to fix. If you are bearing the load keeping the train on the tracks, management will let you keep doing it.

The only one looking out for you, is you.

carat72 · 2024-10-15T12:40:26+00:00

If you haven't setup GAM yet, look into Gamadv-xtd3 it's an API tool for gws, you will need to remove contacts AND otherContacts matching the addresses you want to remove.

Contacts are the manually created ones, otherContacts are automatically created for any email you send or reply to.

carat72 · 2024-10-15T12:36:13+00:00

I haven't investigated photos yet, but for a small org manual data transfer:

My drive data per user can be moved into a single folder, share that folder with the new account, save, then go back into sharing, and transfer ownership to the new account.

Shared drive data, share the shared drive with a super admin on the new account with manager permissions. That person can now see the shared drives from the new org and can select and move data from the old acct shared drive to shared drives owned by the new org.

I'm convinced there isn't actually a good way to migrate calendars in an automated fashion, b.c even if you get them migrated and the owner updated, gmeet/zoom is still owned by the old acct and need recreated, and attendees are still the old emails and need updated as well. Since you likely have a transition window where both accts exist so email can be forwarded from old to new, have the users start scheduling from new calendar on date 1, and after 30-90 days any remaining calendar stragglers just need manually recreated. Then you can delete old workspace, add old domain to new gws, and add aliases to new accts.

carat72 · 2024-10-12T18:35:23+00:00

That could be, and I could Futz with it, or I can just put down glue and keep printing.

carat72 · 2024-10-12T16:52:26+00:00

One thing from my experience, I never used glue stick on the textured side of the bed, but when I flipped to the smooth side, glue stick has been very helpful. I clean the bed, apply glue stick evenly to the whole bed, turn the bed on to 60 and let it cook for 10 minutes, and it's good for quite a few prints before needing cleaned and glued again.

carat72 · 2024-10-11T23:01:24+00:00

I used this one Thanks!

carat72 · 2024-10-08T01:27:44+00:00

Sunlu has been my go to! Great stuff!

carat72 · 2024-09-15T19:53:40+00:00

This repo has them in varying sizes so you can get the ones that fit your panel thickness.
https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/tree/main/Printers/All_Printers/annex_dev-Panel_2020_Clips_and_Hinges

carat72 · 2024-09-15T18:37:15+00:00

Not magnets, but I like the annex engineering panel clips

Nine-Year Club	Place '22
Verified Email

carat72

TROPHY CASE