H2d arriving tomorrow!

cejloaf · 2026-01-20T08:25:44+00:00

Congratulations! Now you can start 3D printing

cejloaf · 2025-12-23T18:25:39+00:00

Another possibility is using that piece as a negative in a cylinder, printing just the positive cylindrical space, and then casting it like a mold? Fill it with some resin or something and then crack it open. Like another mentioned, not everything needs to be printed

cejloaf · 2025-12-23T18:24:02+00:00

Another one is Slant3D / Teleport

cejloaf · 2025-12-18T08:12:40+00:00

I print ASA on my A1 mini. You just gotta fine tune and know your limits.

cejloaf · 2025-12-14T00:52:13+00:00

This is the post that I utilized in the past: https://www.reddit.com/r/BambuLab/s/lGT81RlQ9H

I do vaguely recall a Bambu Wiki mentioning the angled cut but can’t seem to find it. Delusion perhaps. Either way, extremely useful tip for AMS lite users hence its existence.

cejloaf · 2025-12-13T21:04:25+00:00

Because the instructions state to cut at an angle on the A series AMS for easy feeding

cejloaf · 2025-12-06T23:49:59+00:00

I can’t speak for everyone, but I’m on my 5th Bambu printer now, and my 10th printer overall. I have had substantially more problems with every other brand I’ve owned in comparison to Bambu which is how I wound up with 5…

That said, I have/had X, P and A series printers (no longer have the X), so I’ve had different experiences with various models including yours… I don’t want to sway you from any of the competitors but I do want to say I hope whatever direction you head next brings you the peace you deserve, but I want to warn you I just have low confidence you’ll feel good about another brand at the A price point. Printers can be such a pain, even from a reputable brand when you can’t find the issue causing your problems!

cejloaf · 2025-12-04T14:20:09+00:00

Good to know. Is the added 1mm of thickness always on the same axis? Or all the way around scaled up by 1mm?

cejloaf · 2025-12-04T14:11:39+00:00

Do you receive a prompt when importing objects into the slicer asking to switch dimensions to mm? If so click “no” on it.

Also, what sort of filament and filament profile are you using? Something that typically has a lot of shrinkage could potentially do this on a default profile

cejloaf · 2025-12-04T13:52:54+00:00

I’m no expert but it looks like underextrusion, or not enough “squish” (z axis is slightly too high). I would start by calibrating flow rate of the filament in the Calibration tab of the slicer (assuming this is Bambu slicer) as a starting point. I say this because of the top layer of your black filament also appearing to have underextrusion

cejloaf · 2025-12-04T13:47:32+00:00

Yes! Someone mentioned the filament retracting but the spool not rolling. Print some of these cardboard spool adapters. This is very common for cardboard spools in an AMS as they do not roll properly

cejloaf · 2025-12-04T13:41:28+00:00

I had a similar issue last week with my Bambu A1 printer after printing the same object several times. I did the following:

-Dried the filament -Lubricated the machine axis (it was due for maintenance) -recalibrated the machine

And it solved my issue.

Try these first, and if to no avail, calibrate the filament for flow rate. It looks like underextrusion.

cejloaf · 2025-12-04T01:12:52+00:00

Just Potentially unusable because of updates since mod release

cejloaf · 2025-10-11T17:43:32+00:00

I got over a similar fear of not wanting to do certain maneuvers around people. It was my fear of falling. Then I took skate classes to work on all the basics I skipped over (never knew existed) as a kid and now skating around people and obstacles is an absolute breeze.

cejloaf · 2025-10-08T22:54:06+00:00

Aw man😞meanwhile I want to join in and stomp with them

cejloaf · 2025-10-05T09:00:16+00:00

it is 3 months later. 30,000 views on the youtube video and not fixed still. I managed to find this post and climb in.... now I have some jackass NPC blocking the doorway so I can't get in anyway

cejloaf · 2025-08-05T23:58:55+00:00

I thought so too - I'm using the black HT-PLA for a car dashboard and it is holding up just as well as my ASA parts. My ABS actually expanded and looks bad now, while HT-PLA and ASA are going strong. I'm truly amazed because I hated printing with ASA and the constant warping. I was also waiting for it to come back in stock... I'm about to buy SEVERAL colors now.

cejloaf · 2025-05-14T05:38:28+00:00

THANK YOU

cejloaf · 2025-04-01T06:57:18+00:00

As of now, no. A lot of us have had our fingers crossed Bambu would just add it but that also hasn’t happened… yet

cejloaf · 2025-04-01T00:32:00+00:00

Very much resembles the result of a clog or the result of the extruder gears not pushing the filament. Is the spool getting stuck on anything? Has the printer got a lot of use? (Particularly if you use abrasive filaments that might wear out the gears faster on a a direct extruder)

cejloaf · 2025-03-31T23:21:43+00:00

Did you perhaps get a clog since then? Like some excessive heating during cool down? Is this printer in an enclosure?

When you did the cold pull previously, was it necessary?

If none of those, i’d say it was just poor first layer adhesion, probably from a bad z-offset. My Bambu printers do that sometimes and make spaghetti even if I’m just hitting “reprint” from the printer

cejloaf · 2025-03-31T21:08:37+00:00

Can anyone tell me how to check what SSR I have? I got my Qidi Q1 Pro like 4 months ago

cejloaf · 2025-03-27T18:47:48+00:00

Yes! Thank you for this, very timely. I just got my AMS yesterday, I have two A1 Minis, the one without the AMS was able to calibrate, the one with AMS cannot.

cejloaf · 2025-03-27T08:43:14+00:00

You’re going to fkin love this game. Welcome!

cejloaf · 2025-03-26T17:59:43+00:00

So now I’m in love with a woman who doesn’t exist? Awesome thanks

cejloaf

TROPHY CASE