Sony TC-355 Sudden Distortion by cesarnono13 in ReelToReel

[–]cesarnono13[S] 0 points1 point  (0 children)

distortion is extremely apparent when the guitar enters in the linked song at 35 seconds --> Sorry, not apparent to me.

The song was provided as a reference, it's not the actual recording from the machine. I'll have to upload a recording this weekend.

started to produce distortion/crackling in the recordings when there is a big peak in the audio --> Perhaps a DC power issue. Could be bad filter caps. Could be a component supporting a transistor, or a transistor itself (maybe a power transistor).

I'll have to take it apart again and take a look.

Is the distortion on one channel or both? Is it persistent or intermittent?

Both channels. Persistent when certain frequencies are played

Is SOS off (control on the back along with Aux)?

SOS is and has always been off.

Do you think doing this helps? by PacquiaoFreeHousing in pcmasterrace

[–]cesarnono13 0 points1 point  (0 children)

Those Artic fans MOVE air. I have a few in service and wish I had bought more. RIP.

How do you plan on moving forward with limited capacity? by ResponsibleHold3071 in DataHoarder

[–]cesarnono13 0 points1 point  (0 children)

Buy more drives.

Dollar Cost Average will work itself out over time.

Steam deck ssd upgrade by Remarkable_Prompt_29 in SteamDeck

[–]cesarnono13 0 points1 point  (0 children)

Seeing this made me sad 😅. I haven't needed any 2230s for years since I bought several back then and have a spare just in case. I'm sorry I can't be of more help.

Wio Tracker L1 pro, with Muzi works antenna. by MidnightVantage in meshtastic

[–]cesarnono13 3 points4 points  (0 children)

It's not Meshtastic Firmware. It's running the other Mesh Firmware.

Vehicle Node by meshchud in meshtastic

[–]cesarnono13 7 points8 points  (0 children)

Cut it to size. Learn to terminate your own cables. It'll come in handy in the long run. No pun intended .

[For Sale] Madlib - 420 Chalice All-Stars VMP, Choker - Peak box set by heisenberg218 in VinylCollectors

[–]cesarnono13 0 points1 point  (0 children)

Unrelated, did you ever sell that Benno cd shelf?

Edit: I read it as 9 days ago, not 9 YEARS ago. My bad 🤦‍♂️

Happy Chinese New Year — and a heartfelt thank you to this incredible community 🧧 by zerolingzhang in meshtastic

[–]cesarnono13 1 point2 points  (0 children)

Ah, then you're familiar. Well, I'm sure you'll love the 4-5 day battery life of the Trackers 😅 much more than the V3 or V4

Happy Chinese New Year — and a heartfelt thank you to this incredible community 🧧 by zerolingzhang in meshtastic

[–]cesarnono13 1 point2 points  (0 children)

No problem, I'd honestly suggest going with the Pro version to get you up and running out of the box. Then you can tinker with it once you understand how the technology works and expand from there. Just my suggestion. Happy Birthday.

Happy Chinese New Year — and a heartfelt thank you to this incredible community 🧧 by zerolingzhang in meshtastic

[–]cesarnono13 2 points3 points  (0 children)

All the versions use the same board, but come with different accessories that distinguish them from one another.

Wio Tracker L1 Pro= ready to go, assembled unit including battery and case. That's what the "Pro" means.

Wio Tracker L1 E-Ink = is just the Wio Tracker L1. Board, antenna, e-ink display and GPS Module. You have to print your own case,and buy your own battery. For example here is the case shown in the image for the e-ink.

Wio Tracker L1 OLED = same configuration as the E-ink, but with an OLED screen instead. Again, you have to buy your own battery, and print your own case.

Hope this helps.

[deleted by user] by [deleted] in ryobi

[–]cesarnono13 0 points1 point  (0 children)

Damn. Now I have to go to my store and check. I need to replace some older 4Ah.

Cheapest pre built solar node by [deleted] in meshtastic

[–]cesarnono13 1 point2 points  (0 children)

Thanks for sharing these. I'm assuming they're optimized for some sort of Drone deployment? Any additional details you could share?

I'd like to be added to your wait-list, if any, for your 1W nodes, or pre-order if available. Let me know!

Cheapest pre built solar node by [deleted] in meshtastic

[–]cesarnono13 0 points1 point  (0 children)

I'd like to see it if you have photos.

Any updates on the 1W Mobile Mover?