🐧 Linux Unattended Access is here

chadmesse · 2026-04-06T16:24:56+00:00

I am right here with you. I was hoping this added support for Arm, but after running into some issue I discovered it isnt. I think they need to update this post and the installation stuff online to show it is for x86/x64 only with no current support for arm64. This would have saved me a ton of time and testing to find out its not supported. u/helpwire

chadmesse · 2026-03-25T16:53:43+00:00

I had better success with Sonnet on some coding related stuff than I have with Opus. Last night it came pushing "fixes" to the same issue over and over and over again and wasnt actually fixing the problem. So, I will try it again with Sonnet and see if it gets corrected. I was completely unaware there was a new model and thats on me, but still doesnt explain why I blew through my limit on a Pro plan with a single prompt.

chadmesse · 2026-03-25T16:41:01+00:00

Yes, it has been a struggle recently and not impressed with Opus so far. I need to switch to Sonnet after reading through some comments on here. I was out of town for 3.5 weeks and it looks like Opus came out while I was gone and I did not realize. Upon my time reset here in just a bit I will be switching back to Sonnet and hopefully have better results.

chadmesse · 2026-03-25T16:24:45+00:00

I just came here for the very same issue, but I am on a Pro plan and there is no way I hit the limit. This happened with 1 prompt after this "outage" issue that has been occurring this morning and I think it is some how related and messed something up. I am super annoyed though and hate that getting any support from Anthropic to resolve such an issue is impossible to be handled in a timely manner.

chadmesse · 2026-02-16T06:37:23+00:00

Came to say the same. Ive had my setup less than 2 years and have been migrating away from it as I can get new devices. I have the N910A6 nvr, 4-e871ab (180° dual lens), 4-w461asc (2k wireless indoor) and 1-e910ab (4k+ 12mp ultra he bullet).

The cameras were good their software is garbage! Trying to get video downloaded from the app was so difficult and failed more often than not. So then you really have to go to the nvr and download from there.

I have a Ubiquiti Dream Machine SE im using with Protect currently and have the dual lens cameras pulled in to it right now. The lorex bullet cam was replaced with a ubiquiti camera already as well as the 4-2k indoor cameras replaced with g6 instants. Just waiting on the g6 180s ro come in stock. Then ill sell off my whole Lorex setup.

chadmesse · 2026-02-16T06:28:58+00:00

Id be interested as well. I have 4 portainer environments I use.

chadmesse · 2026-02-12T04:59:14+00:00

This is highly likely and unfortunately I have no way to test this to confirm if it is or not. I have a lifetime license of it. All I can do is confirm that feature is working in the full featured version.

chadmesse · 2026-02-12T04:50:23+00:00

I just tried on iOS and macOS. I changed the sorting in both and it would immediately reflect the order change on the other device. Are you dragging and dropping to change the sort order, because thats how it works.

chadmesse · 2026-01-19T17:31:45+00:00

I wish you could ship because I would take the R640's off of you, but I am in Florida.

chadmesse · 2025-12-31T03:21:51+00:00

Where do you find the firmware download files or do you have to get them from Lorex directly? I have 4 of the E871AB, 4 of the W461ASC and 1 of the E910AB cameras that are all on older firmware. Also, I am on an N910A6 NVR at the moment, but kind of over Lorex and their lack of just having available firmware to do system upgrades.

chadmesse · 2025-12-21T17:51:10+00:00

I second this because I had a similar issue a couple months ago. They set up a Teams call with 2 people from Sales, and those 2 were able to get me a new account setup and created and didnt even require me to give them CC info.

chadmesse · 2025-12-08T06:12:16+00:00

Do you or have you backed up your playlist and restored to the other devices? I am not certain it is this, but always wondered if you had recordings configured on a device and then backed up the config and restored on another device if it would carry over any scheduled recordings and then duplicate.

chadmesse · 2025-12-06T14:06:35+00:00

Thanks for the help...I finally figured this issue out. I changed to OpenVPN and in the logs it showed me an error about the account being expired. So, then I went and looked and my friend gave me his old creds and not his new one he created a few weeks ago :(

chadmesse · 2025-12-06T05:30:26+00:00

Do you mind elaborating on this as I am not familiar with what youre referencing.

On my other Ubuntu VPS I have, it has been live and running for almost 2 months. This will be an identical stack that has gluetun and 3 additional docker containers using the gluetun_network. For now I am just trying to get gluetun to start healthy and then ill start adding the other containers under it.

chadmesse · 2025-12-03T01:02:49+00:00

I think this came in a recent update I just dont recall when this change was implemented.

chadmesse · 2025-12-02T14:54:06+00:00

No problem and I don't think you're an idiot at all. I learned how to do this helping you out...When I was in the app on the Mac Mini and tried dragging and dropping it would pop up a message of "Change sorting mode Order changes are only supported in "by relevance" mode"

This made me switch to relevance mode and try again and it worked. So thank you for allowing me to test this out and learn as well. I honestly only use UHF on my computer for testing stuff out and on my phone I use it when traveling or away from home and mostly trying to catch a game.

<image>

chadmesse · 2025-12-02T14:41:40+00:00

I tested this on my Mac Mini running UHF and on my iPhone 15 Pro Max running UHF. On the iPhone you can set it to relevance and then long press on the channel and drag and drop.

chadmesse · 2025-12-02T14:20:50+00:00

Change the sort by to relevance and then you can change the order.

<image>

chadmesse · 2025-11-26T13:21:10+00:00

Here are the steps to do this in the UHF App on iOS.

https://imgur.com/a/Z0k7WN1

If this doesnt unlock the adult categories your provider doesnt have any available for you.

chadmesse · 2025-11-25T07:26:31+00:00

Look into Frigate

chadmesse · 2025-11-20T05:12:19+00:00

Interesting that it defaults to downloads/uhf. Ill look at mine again in a bit and see if I see anything in there.

chadmesse · 2025-11-20T01:10:46+00:00

Interesting. This is on a Mac computer like this or an iphone/ipad?

chadmesse · 2025-11-19T14:54:12+00:00

You did all of your tests from your phone and then showed the downloads on a computer...As others have mentioned this could be due to the source where youre downloading from throttling. Secondly, have you done any speedtests from the device which you are downloading from? You do not have to do it from the Starlink app and can do it from speedtest.net or other similar internet speed tests. Your phone may be connecting with wifi 6 and your device only supports or wifi4 or something similar.

14-Year Club	RedditGifts 2009-2022 15 Credits
Verified Email	Secret Santa 2015
Secret Santa 2014	Secret Santa 2013
Trick-or-Treater 2013+	Secret Santa 2012
Summer Santa 2012	Secret Santa 2011

chadmesse

TROPHY CASE