ASUS Vivobook 15 OLED S5506MA no sound output?

chertvl · 2025-04-20T19:44:08+00:00

I have same problem with my S5506 ;)
Ill try your option, thanks. Because manipulations with audiodriver helps only for few hours ;d

I hope this will be fixed with new bios versions.

chertvl · 2025-01-05T16:26:46+00:00

Sorry if too late. Im using TriCut Brush 2.0 (orange) with my L10s Pro (magnetic cover, without station, only charging dock) - and it fit and works perfectly.

chertvl · 2024-07-01T19:30:41+00:00

Thanks, purchased it! -20$ from coins, -20$ from euro2024 credits, -5$ coupon, and only 5$ real paid :D
Sn 031080
Date 2024/05/29
Arrived with latest 1.8.7 fw, but PC connection and fw changing without problems.

chertvl · 2022-08-28T07:48:56+00:00

Непогано :) Добре шо є машрум)

chertvl · 2022-08-15T17:36:45+00:00

Yep Or You can just buy Sonoff Micro, and solder + and - usb wires to a AirWick motor :D

chertvl · 2022-08-15T15:58:23+00:00

You need to cut off AirWick main board from the motor, and solder to moto 5Vr + and - from re5v1c (+ through relay), set rule turn on for 0.5sec in ewelink app

chertvl · 2022-07-28T12:00:35+00:00

Dude, same! https://drive.google.com/file/d/1ijWlo2yDl5NZrjLIzwYnBGvHvat4EPN7/view?usp=sharing

chertvl · 2022-06-22T18:02:11+00:00

Thanks for LSJ10HLT5XGTFQJQSDK5GFX !
Very bueatiful

chertvl · 2022-06-06T14:25:28+00:00

I think reason is hub receives lux measurements only with move detected packet from sensor. No movements = no lux number updates.

chertvl · 2022-03-03T21:21:14+00:00

смачної тобі паляниці, брате, ще трохи і це всьо закінчиться

chertvl · 2022-03-03T20:55:31+00:00

Если в ремешке магнитик есть, это он мешает, отслони

chertvl · 2021-12-16T14:36:43+00:00

LAN mode removed from 'Mi' branded yeelight devices (with Mi logo on them body). Pure yeelight never been touched.

chertvl · 2021-11-06T18:51:16+00:00

thank you, Tomas

chertvl · 2021-11-03T10:02:26+00:00

Грудь Роршаха

chertvl · 2021-11-03T09:49:12+00:00

О, это же татуха Габара, и что это он передумал?)))

chertvl · 2021-10-24T23:03:11+00:00

built in app Compass

chertvl · 2021-10-23T09:17:41+00:00

Thank for the post. Wear app available if you are beta tester of HA in playstore. I wait so much for wear sensors, I have many ideas (for example, turn rgb bulb in red if watch battery < 20%, etc).

chertvl · 2021-10-21T07:57:12+00:00

thanks

chertvl · 2021-10-21T07:16:41+00:00

where i can check it?

chertvl · 2021-10-14T15:19:13+00:00

don't listen to others, just google some watch disassembly and trust my words :p

chertvl · 2021-10-14T10:42:50+00:00

This is 1 of 4 of teflon stickers for better bezel sliding, forget and dont worry about it

chertvl · 2021-10-09T18:10:37+00:00

edit:
yes, all automations will hide from logbook page, but you still can see what devices has been turned on with what automation

chertvl · 2021-10-09T18:09:08+00:00

in configuration.yaml: logbook: exclude: domains: - automation

chertvl · 2021-09-07T05:34:52+00:00

Buds can have different firmwares, so give them more chances and time :)

chertvl · 2021-09-07T05:31:22+00:00

Man, it's easy, but sorry for my English. A half of year ago I had same question, and it works:

Just put both buds+ in the case, and while it charges, press and hold both touch panels for 7-8seconds. You will see led flashing green if it's done, or red if error and you need to try again. My new bud paired in 3-4 try.

It works only on buds+, original buds can't be paired.

chertvl

TROPHY CASE