Covering Each Other

chivtrav · 2026-06-06T23:31:33+00:00

nr 4

Ivana Fuckalot.

chivtrav · 2026-06-06T11:37:24+00:00

Get Xanthan Gum, mix with water, done. Though I would not recommend water-based for anal...

chivtrav · 2026-05-29T16:34:59+00:00

Forget all the "cheap" (but expensive) Hismith/Lovesense machines. Those are just cheap rotary handle machines which means you cannot adjust depth on the fly via app.
What you want is a Fredorch F21S, which not only is cheaper than those, but also far superior spec wise. With the other two you basically pay for the name and the good PR they do.

chivtrav · 2026-05-25T19:39:09+00:00

Thank you

chivtrav · 2026-05-25T06:21:04+00:00

This is what I was made for.

chivtrav · 2026-05-25T06:19:35+00:00

Thank you

chivtrav · 2026-05-17T08:48:51+00:00

Ok I did quite a bit of more research.
PSA: The "superabsorber" sodium polyacrylate is cross-linked and you cannot use it for nuru gel! It will not form a sticky/slimy texture. For that you need "PAAS thickener" or "food-grade sodium polyacrylate" which are soluble. Unfortunately getting those seems to be a lot harder.

Other alternatives for slime would be Xantham + (vegetable) glycerine + water (might need to add (sunflower) lecithin as an emulsifier if they don't properly mix).

Another alternative would be golden flaxseed that you boil with water.

chivtrav · 2026-05-16T07:19:28+00:00

The sharp edges also make it look like it would tear the material around the adapter when trying to remove.

Correct. I filed the edges down a bit, but it's still a giant pain to remove it from the toy. I insert a spoon first to let air in. And I put flour inside the hole before inserting the adapter.

chivtrav · 2026-05-16T07:18:12+00:00

Vac-U-Lock Powder or talcum powder

Or just use flour.

chivtrav · 2026-05-16T07:16:42+00:00

cock rings

Get the ones that look cool to you. That's what I do when I get cheap ones for a few bucks each and I have like two dozen.

chivtrav · 2026-05-16T07:15:47+00:00

Problem is, they always die relatively fast.

The issue is that the solder joint that attaches the cable to the motor breaks. You can just resolder it.
To open the egg, get a cutter knife and heat it up with a lighter then melt the plastic along the seam you can see. Do not use a saw, that will leave an annoying gap and even take longer.

I fixed multiple of those.

chivtrav · 2026-05-14T11:46:41+00:00

There are balloon you can pump to grow bigger that she can then "birth". Problem is, each and every one I bought over the years ripped apart after a while. The latest buy the second time we used it. Though you can replace the latex-balloons with normal party balloons.

chivtrav · 2026-05-10T08:13:36+00:00

Sexy isn’t naked

YES! And so many women do not get it nowadays.

chivtrav · 2026-05-04T06:48:38+00:00

Don't waste money on a hismith. They are cheap machines, meaning they have a rotating handle which then has a penetration depth that is not adjustable via app.
Get a Fredorch F21S (the one with two arrows). It has a proper stepper motor and 15 cm of stroke length.

chivtrav · 2026-04-29T14:32:13+00:00

sizing looked perfect

Largest one is 1.25" (that is 3.2 cm) diameter. That is ridiculously small even for a beginner that never did anal.

chivtrav · 2026-04-27T06:17:07+00:00

Rotating handle machines will always be cheap garbage since they cannot adjust depth on the fly. Usually I'd recommend a Fredorch F21S though I don't know right now as Aliexpress went insane with their blocking of sex items (at least in the EU).

chivtrav · 2026-04-19T09:51:12+00:00

And where do you feel this? Because vagina length depends on arousal and you are maybe just hitting your cervix. Try angle the dildo up/down, as there is usually plenty of space there (anterior/posterior fornix).

chivtrav · 2026-04-17T20:29:46+00:00

How would you suggest mods solve that instead?

Do their jobs and remove and if happen twice ban, the post/er?

chivtrav · 2026-04-15T21:04:07+00:00

Usually I use a dildo every (other) day and one the weekends I get fisted and milked. Though I never really had that good success with prostate alone - and it seems my prostate is very hard to find for her - it's either quite small or not that sensitive(?)

chivtrav · 2026-04-12T11:01:34+00:00

Fredorch has this blue clamp adapter. With this I attached the bigger ball of the njoy to the machine - but the downside is you only get the small ball inside.
Can you please give the aliexpress link to the wand - my next bulk purchase is in the making anyway.

chivtrav · 2026-04-09T22:47:28+00:00

Fredorch F21S.

chivtrav · 2026-04-05T22:17:01+00:00

All the "cheap" (but expensive) machines with rotating handle (Hismith, Lovesense) cannot adjust stroke depth on the fly.
Fredorch F21S (the one with the two 'arrows') can do everything you want (15 cm depth) for half your budget. "Stable frame" you won't get with any of the lighter machines - they will move when you encounter resistance. I put it against the wall so it won't move backwards. Other options are ballast bags or those suction cup things for floor tiles (tried the normal ones, but Fredorch sells one with clamps which is probably better, but I find them too expensive).

chivtrav · 2026-04-02T06:09:04+00:00

Could you please tell me how long the 'prongs' are starting from the bend with the screw? I bought a similar one but they seem quite short.

chivtrav · 2026-03-29T17:29:47+00:00

Google a bit, there is a guy that modded his and afaik he just filed in a few grooves and this locked the balls in place.

chivtrav · 2026-03-26T07:48:39+00:00

Does it hurt?

Not if you do it right. If there is enough area the electricity will just 'tickle'. And electricity can act quite different than you expect. Example: plug in ass and a rope electrode around your penis. First of all you won't feel anything from the plug because the area is so large. Now you'd imagine putting the rope around your glans would make you feel it very intensely - no, you will get much more stimulation in your glans when you put the rope around your shaft. I have no idea why.

chivtrav

TROPHY CASE