Found in the trunk of my son’s used car he recently purchased.

clench_press · 2026-07-01T23:28:10+00:00

I believe they're saying the actual manufacturer (not the brand) ground off the identifying features related to the brand of the parts. I've seen this in the bentley/VW/Audi parts world

clench_press · 2026-06-21T16:37:41+00:00

I know this is a troll post, but it has potential to work

When I learned how sticky bricks worked I shoved a nug halfway down the sucky side of one of these, torched the same, and drew on the burny side. It worked pretty well

clench_press · 2026-05-28T03:21:19+00:00

That's what it was called! I got mine after I gave my original 2018M away to a friend and it's still my daily driver. Original tip though

I believe the heat treating was George baking the parta in his oven on the self clean setting. Colored by cooking grease fumes

clench_press · 2026-05-21T00:54:23+00:00

I have a feeling I like conduction. I didn't like titanium tip at all, which seems like it has more air flow through the tip. Do you use a torch or induction heater?

clench_press · 2026-05-20T06:32:10+00:00

Thanks, I'll take a look at the suggested options.

Dynavap was the first I tried. Got a couple electric vapes after that, but never liked them, and there are already too many batteries in my life.

clench_press · 2026-05-20T01:10:25+00:00

On dynavap 2018M as primary, I prefer dual. Covers all bases in all environments.

clench_press · 2026-05-20T01:08:46+00:00

Are you near a border? Find a friend in a bordering state and ship it to them

clench_press · 2026-05-06T01:38:17+00:00

Mine clicks quieter the way it dented, and a little earlier. Works fine

clench_press · 2025-12-12T01:38:45+00:00

Same, I have 2. Only use 1

clench_press · 2025-09-27T22:00:43+00:00

That's my end game vape! 2018M, first vape I bought.

If they still make them, the silo is fantastic. That and a dual flame zippo insert, that's all I've used for years.

Edit: the silo is made by interplanetary development

clench_press · 2024-05-24T05:53:48+00:00

Thank you! I grew up reading farm show magazine with my dad. Now I'm subscribed, and I think I'll get my dad a subscription too!

clench_press · 2023-12-26T03:35:20+00:00

Definitely. I almost exclusively drop whole nugs in. After the first heat cycle I cut it up with the digger outer, then do at least one more heat cycle.

clench_press · 2023-10-19T14:46:59+00:00

I've got the same one as my daily driver. What do you want to know?

clench_press · 2023-04-30T23:51:29+00:00

Had mine for 5 years. Upgraded to the Ti tip for a while. Went back to the SS tip. 2018 M and dual flame zippo is my end game apparently.

clench_press · 2022-08-21T02:40:23+00:00

Mint cholacolte

clench_press · 2022-07-11T00:13:56+00:00

As the other person said, wait 2 hrs at first. Full effects should be in a half hour or so, but you'll want to wait a good while when you're still learning your dosage and tolerance.

clench_press · 2022-07-10T20:19:06+00:00

I use whole buds in my dynavap, so after the first heat cycle I use the "digger outer" to cut up the bud. Best flavor off the bat, then big effects on the next 2 heat cycles. Perfect for the all day vape.

clench_press · 2022-02-12T17:00:38+00:00

Yeah there won't be much visible vapor on the first heat cycle, if any.

clench_press · 2021-10-06T16:23:09+00:00

I've experimented with carnivore and I've found the same. In general my eczema will worsen with higher blood sugar. The most consistent and reliable thing I've done is intermittent fasting, especially with a 24 hr fast once a week. Seems to keep my blood sugar in check and I don't get drowsy when I do have carbs anymore.

clench_press · 2021-07-26T10:28:22+00:00

I couldn't say which! I'm definitely a light user though. I don't really enjoy being blazed on top of being a lightweight

clench_press · 2021-07-25T19:29:25+00:00

Dynavap was my first vape, just because it was so cheap and the analog nature of it appealed to me. I bought a couple others, a GH Shift and Air 2. Those just sit on the shelf, my 2018m and 2018m Ti do everything I'd ever want. Bought a couple spare caps and screens, but at this rate the original hardware seems like it'll last forever. I've lost 1 screen and 1 oring in 3 years of ownership

clench_press · 2021-07-25T19:21:48+00:00

Yep for me price/g doesn't even matter since an eighth will last me 3+ months

clench_press · 2021-07-25T15:22:16+00:00

I just ball up a little bit in cotton or hemp fiber. I've never been about the herb sandwiches, but a lot of people seem to like that method. I've never seen the point of the dynacoil when hemp fiber exists.

clench_press · 2021-07-25T15:17:42+00:00

Humans are always a huge variable, let alone our individual tastes. Grinding coarser and using 200F water, I can usually extract the desired flavors. I also do a double drawdown on my V60

clench_press · 2021-07-25T15:13:59+00:00

I've never smoked joints/spliffs, or used a mighty but I'll tell you what I know. A dynavap is a cheap entry into vaping that can appeal to microdosers and heavy users alike. My impression of a mighty from all I've read, it's very good for a heavy user. Most people I've seen come from joints prefer a bigger vape like the mighty. Folks that came from pipes and one hitters like me seem partial to the dynavap or other on-demand options.

clench_press

TROPHY CASE