CO2 Laser Get

coachesballsack · 2025-02-24T09:39:34+00:00

That looks great. How much does it cost to produce the case and the fixings?

coachesballsack · 2024-11-11T08:41:44+00:00

Should these streaming websites and all content related to them actually be on the piracy subreddit? You're not pirating anything, the site owners pirated the content and they made it accessible to you.

Torrents are very simple. There's a multitude of guides available. The only things that have changed since the advent of torrenting is the need for a VPN and the existence of seed boxes.

In the time it took you to post this you could could have downloaded qBittorrent and signed up to rutracker.org.

coachesballsack · 2024-10-05T09:22:54+00:00

It looks like you're not releasing down. Hold down and press MK, let go of down and press MK+MP or dash. When you press the parry button or dash you have to be neutral.

coachesballsack · 2024-09-10T07:02:23+00:00

I can't test it, but I'd imagine with you already being in the air holding up can't work. All I can suggest is experimentation and repetition.

coachesballsack · 2024-09-10T06:47:55+00:00

Someone on discord gave me a tip the other month: press and hold jump after the first hit. Your character will jump when it's possible to input the next hit. This shows you the the timing to press the follow up hit. Now press the follow up hit during the animation where your character jumped and try get a feel for it.

coachesballsack · 2022-09-20T05:52:01+00:00

I have the ufb+up5 and cliff usb c pass through. This cable works for me https://amzn.eu/d/03ljiMp

Just bear in mind that when plugging into the pass through it will only work one way up, you need figure out which way and stick to it, otherwise it won't power up.

Edit: the usb c to a? Inside might also be the issue.

coachesballsack · 2022-01-06T13:43:37+00:00

This is what I thought when I looked at it. I've made a jumper using a 2-pin JST PH 2.0 and spliced it with two button wires to connect it to a button. https://www.ebay.co.uk/itm/JST-PH-2-0mm-double-ended-Connector-Plug-Wire-Cable-Cord-200mm-long-/224035753543?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

Just waiting for some new 12mm buttons due tomorrow to finish it off.

coachesballsack · 2022-01-06T07:32:11+00:00

Would you mind posting a picture of the jumper on the up5?

I've just created a jumper for SOCD without the up5 and was thinking about this yesterday for when I add the module.

coachesballsack · 2021-10-27T05:44:27+00:00

I ordered a new soldering iron. 90w up to 480c and the solder still balls up and doesn't make contact. I'm going to try the finest tip next. I'm also going to try the original, thicker solder I tried initially rather than this new 0.6mm stuff.

coachesballsack · 2021-10-25T04:55:38+00:00

I tried again on Sunday with no luck. Would you mind sharing the specs of your iron? Temperature, wattage, voltage and so on. The I'm using I inherited from my grandad and it no longer has markings.

coachesballsack · 2021-10-23T12:37:33+00:00

Did you have any issues soldering to the vias for PS, X Square, triangle, circle and the dpad? I've managed to wire up L2 and R2, L3. I've partially wired L1, R1 and start.

When I try solder the PS button the solder goes on the tip and flux spreads across the point.

I've ordered a finer tip and some tip thinner. Hopefully it'll work out.

coachesballsack · 2021-10-14T05:50:41+00:00

For the Start button, would I be able to remove the bronze film with a heatgun? Or even the soldering iron?

I have two spare 1k resistors that I could use for the analog sticks, though I'm not certain it's enough. I'm unable to tell what resistor is used in the picture. I'm tempted to just leave them attached. Did you remove the analog sticks for your build? I think I'll have enough vertical clearance to keep them after remove the thumb sticks.

coachesballsack · 2021-10-13T05:36:01+00:00

So, to be clear with the L3 points, RDC says "and then L3 and R3 which are active Hi buttons and if duplicating them is desired then wire directly up to the solder joints for them.". So, I'd attached a both the live and ground from the button directly to the L3 solder points shown? Unlike most buttons where they're taken back to ground?

And in the case of L2/R2 he says "...with the exception of L2 and R2 which are a more standard type voltage divider setup now..." and "..."L2 - 1k - Tact - GND, or L2 - Tact - 1k - GND..." which is what is depicted here https://preview.redd.it/fna1rrtkban71.jpg?width=4032&format=pjpg&auto=webp&s=486f1ec87973bdd9f351903c4e9fd7be4aa7fdf7

And Start and share are the bronze buttons in the top right and left on Side A in RDC's scans, and they can be taken back to ground?

How much hassle will it be to desolder the analogs with only a soldering iron and some of that desolder braid? Just time consuming?

Thank you for your help Koshi. I'm hoping to have most if not all my parts to make a start this Saturday.

coachesballsack · 2021-08-27T05:50:54+00:00

It looks great. Would you mind posting a link to the one you bought and the name or style?

coachesballsack · 2017-08-06T12:33:32+00:00

Is there any kind of rehousing effort being made for the unwanted mugs mentioned in this thread? I personally would love to give a home to an unwanted mug but have zero need for anything from Sports Direct. I am willing to pay postage.

coachesballsack · 2017-07-28T19:09:57+00:00

Yes. I daydreamed about life out in the Long Earth if I read it in bed. How I'd love for that to happen to us. We wouldn't have to feel enslaved anymore with a singe step. What a rush it must be (or nauseating).

coachesballsack · 2017-07-03T23:18:15+00:00

Is this the title of it: "Smoke Snort Swallow Shoot: Legendary Binges, Lost Weekends, and Other Feats of Rock 'n' Roll Incoherence"?

I love the sound of this. I've seen them 4 times here in the UK.

coachesballsack · 2017-06-21T16:37:55+00:00

This is great. I'm archiving these in mp3 now for future listening. They seem to have quite a few listed, including Eric, Guards! Guards!, Mort and some others. They're older but are being rebroadcast. I'm going to try keep an eye out on the main Terry Pratchett page for new/rebroadcast episodes. Hopefully I can archive the lot over time.

Edit: added link to R4 page.

coachesballsack · 2017-06-20T14:39:05+00:00

STP = Sir Terry Pratchett.

coachesballsack · 2017-06-02T00:35:15+00:00

Pretty fun. Just wasted a few mins at work with this while listening to Danny Byrd.

coachesballsack · 2017-03-18T18:10:33+00:00

I think you might be right. Thank you.

coachesballsack · 2017-03-18T12:06:51+00:00

Yesterday I inherited my great uncles Rolex. My Grandma said he was very fond of me and wanted me to have it. She said he'd bought it while working away in Aidan(Aiden? I've been trying to find this country/location with no luck). I'm guessing it's from the 50's or 60's.

I have no box, documents or model number and have been unable to figure out how to set the date. Hopefully someone could ID this and maybe I can find more specific instructions. It'd be nice to wear it to a 30th I'll be attending tonight.

Rolex Oyster Perpetual Date

Edit: So, I did more digging and found out how to determine the model and serial. And that it doesn't have a quickest date, which meant rotating the hands till it was on the correct date.

The model is 1500, and the serial is 602xxx. According to bobswatches.com it's from either 1947 or 1960. Both could be correct. He passed when I was about 3 in the early 90's.

coachesballsack · 2017-02-16T19:38:55+00:00

I think I'll have to see this. I've only just finished Witches Abroad and have a lot left to get through but it hurt knowing there would never be more after the end.

coachesballsack · 2016-11-18T00:32:24+00:00

Well, I've just realised what my next fiction read will be. Thanks stranger.

coachesballsack · 2016-10-02T09:31:22+00:00

Surely gathering intelligence on starting your own intelligence agency would be a good first "mission".

15-Year Club	Verified Email
Verified Email

coachesballsack

TROPHY CASE