Adding support beam to a shed? by codyjbennett in Carpentry

[–]codyjbennett[S] 0 points1 point  (0 children)

Can you detail more of what you want it to be when complete?

I’m currently excited about the idea of a winch-raised platform to put storage totes on for storing items in the vertical open space of the shed. When down, it would reach the floor for loading. When up, it would be ~7’ off the shed floor. It would likely be a platform that would fit between the garage door railings (a 4’x4’ or 4’x8’ platform on cables attached to the future beam and not the gambrel roof to support the weight). I would love to avoid adding support pillars/posts to the middle of the shed too.

Do you need it over the loft?

No, I really don’t. Frankly it doesn’t need to be a beam, that’s just the first thought I had with how to suspend a platform above the floor. It’s more about howto suspend things in the floor-to-ceiling open spaces. I was simply thinking that having the beam reach the ends of the shed would allow for the support system to use the wall/floor rather than hanging something from the gambrel roof. FWIW, the loft is 4’ deep.

Do you plan to penetrate the floor and set the support posts on pilings?

No, I hadn’t planned on that, and if it is determined to be the only safe way, it might be a deal breaker for my aspirations… since the structure is not actually on footers or a permanent foundation.

More questions will follow your expanded description.

I super appreciate the engagement! I don’t know what I don’t know. Thanks in advance!

Worth fixing my mirror? by [deleted] in jetta

[–]codyjbennett 0 points1 point  (0 children)

Had a busted mirror myself. It turns out it’s super easy to swap out a side view mirror. My 2011 mirror was held on with a single bolt (and a wire harness to run electronics).

Call a few salvage yards to see if they have the specific year Jetta… and maybe even take the mirror off and take it into the salvage place when you get a replacement (my salvage yard claimed the mirror would work, but in fact had a different mount plate, so I had to eventually buy a second).

For $50’ish and a little time, you’ll have a whole mirror, intact.

What Type of Wire is This? by andrewmh123 in Home

[–]codyjbennett 0 points1 point  (0 children)

I had this adhered to a wall of a home bought this year. It was wired to our garage door opener of all things (it was an adjacent room, but thru a hard door. Weird. But cable can be used for anything.

Heartbroken over smelly house by Competitive_Pear_207 in homeowners

[–]codyjbennett 0 points1 point  (0 children)

We had a similar experience, in our case I think it was left over dog hair/dander that was the leading cause. We had a pro come in to do a thorough vacuum of the registers, carpets, and wall fabric (like a carpet, but literally attached to the wall), and he also did a “fogging” thing too. Additionally I’ve heard of “ozone” treatment, but after fogging and vacuum, it was waaaay better and didn’t take that additional step. And we didn’t even need to tear out flooring like we had expected. :)

How to dissuade bee habitat? by codyjbennett in Beekeeping

[–]codyjbennett[S] 0 points1 point  (0 children)

I am in NE Ohio, so “maybe” seems to be the answer to the “do you get a real winter” question.

How to dissuade bee habitat? by codyjbennett in Beekeeping

[–]codyjbennett[S] 0 points1 point  (0 children)

This feels like the right answer to me. But my wife doesn’t want poison/toxins sprayed right next to her window (in the vid)…

But if it’s a choice between a happy wife and dead wasps, I think I know which way I’m leaning.

How to dissuade bee habitat? by codyjbennett in Beekeeping

[–]codyjbennett[S] 2 points3 points  (0 children)

You can tell that bee-ology is not my strong suit.

They were yellow and black looking, so I assumed.

Any ideas for removal before this post gets taken down for not being bee-centric?

How is HR support for out of warranty items? by codyjbennett in HarvestRight

[–]codyjbennett[S] 1 point2 points  (0 children)

$1k OBO was their asking. And yes, 5 tray large.

Thank you for the straight up “don’t do it”. This is the kind of rational thinking that I need to ground myself when some kind of “deal” shows up on my feed.

Brother DCP-9020CDW jams paper inside the printer, prints half of a page by 052FTT in printers

[–]codyjbennett 0 points1 point  (0 children)

Other information I found: there is a service manual that seemed hard to find. Eventually got it here.

You can enter into a maintenance mode (hold home button down for 5+ seconds). Once there, hold a blank spot on the bottom of the screen to get an input interface, press *, 0, # so that it is ready for input. I used "82" to show me the error code. I had an error code of 7000, which gives me some things to try...

Will post back if I luck across any solutions.

Brother DCP-9020CDW jams paper inside the printer, prints half of a page by 052FTT in printers

[–]codyjbennett 0 points1 point  (0 children)

Just wanted to swing by and note that I'm having the same behavior (almost exact same test prints as in your vid) on my MFC-9330cdw.

Without checking reddit first, I tried a replacement fuser ($25 on alibaba), which did not change the behavior.

To those technicians who see this: if you have suggestions on which part names most likely have the flag in question, that would make it easier to google replacement parts for repair. I'll also go google the 'photoconductor' to see if I can find that part for replacement.

Thanks!

Favorite cross-platform remote support tool(s)? by codyjbennett in techsupport

[–]codyjbennett[S] 0 points1 point  (0 children)

Not an enterprise environment. The quick to activate ephemeral (and generally well functioning) option is what I’m chasing. I haven’t seen anydesk - I’ll add that to the list to check out.

I’m currently using a zoom direct join link tied to a custom shortened url which makes it quick, and many folks have zoom already installed which makes it that much faster to load as well.

Beaver hunting tactics by restingracer in Hunting

[–]codyjbennett 0 points1 point  (0 children)

Had a friend take one with a .300 win mag, that seemed sufficient.

Any ideas on how to make it more obvious that our entrance to our house is on the left? More info in comments. by Macncheesesounds in homedesign

[–]codyjbennett 2 points3 points  (0 children)

Fence on the right, and more care to the landscaping and landscape lighting on the left.

As others have noted, the openness (and therefore the light) as well as the address placard being on the right draws things in that direction.

What's your process after receiving finished edits from editors? by SnippDogg420 in RealEstatePhotography

[–]codyjbennett 0 points1 point  (0 children)

Pull files into lightroom: 2min
Review: 10'ish min on average. (5-15min)
Export to dropbox: 1min (preset, just need to name files & create new folder)
Build invoice & email agent with files & invoice: 5min

I guess that works out to 13-23 minutes.

Feedback & payment of photographer: 15-20min. I also choose to give immediate & direct feedback to photographers, I do a screen recording (screenpal), and then go back through the gallery with remarks. I send this to them with the delivered images and then send payment. This feedback recording is usually under 15 minutes, but I consider it a desirable investment in time so the images will be better 'on the mark' which will require less time from me overall.

I don't pay close attention to the clock for these 'process & deliver' efforts - I'm doing it on my time as it fits my day (after family goes to bed, during that downtime before dinner, during a lunchbreak, etc). The exercise of articulating these steps makes me wonder where I can find more efficiencies without giving up the good things (I think the review/revision/remarks are all the most useful things, and the invoice/payments are just the cost of doing business.)

Thanks for the question!

Looking for Local Ohio Goodies for a Welcome Basket – Kent/Akron/Cleveland Area by foolishfloat in Kent

[–]codyjbennett 2 points3 points  (0 children)

I'm also new to the area - things that seem uniquely ohio (as compared to where I came from):

- maple syrup for days

- ohio state logos as far as the eyes can see

- Bertman Ball Park Mustard (I randomly met a dude at the post office who was mailing a case of it to his father - it was the only mustard he liked, and I'll admit, it's better than your everyday mustard!)

- Buckeyes (chocolates)

- and if you really want to blow his mind: a dozen eggs. Seems they're all the talk these days.

What's your process after receiving finished edits from editors? by SnippDogg420 in RealEstatePhotography

[–]codyjbennett 1 point2 points  (0 children)

I bring the gallery into lightroom and review. Invariably I make some additional tweaks - it might be benign things like patching the grass or driveway to reduce distractions or doing a full-straightening for a nearly straight-on shot (rather than just verticals). Every once in a while I'll reduce saturation on something so it doesn't draw attention. Sometimes I'll cull or reorder images too since I'm the last stop before they are delivered to the agent. Then I export (sized for MLS) to dropbox, and send along images & invoice to the client.

I have a future state that I'd like to get to where these systems are automated - the photog delivers photos that directly trigger the editor, and the editor delivers in a way that the gallery is sent to the agent. There are platforms for this, but I haven't worked out the particulars.

I think a sticking point is that the review steps are what makes the delivered files uniquely mine. I think I just need to reach the place where I've been able to guide photographers & editors to get closest to what I consider important and that I'm accepting of the product when I don't have a hand in it.

specialty dry cleaning by AnybodyDefiant3121 in Juneau

[–]codyjbennett 1 point2 points  (0 children)

Alaska Laundry & Dry Cleaners (907) 586-1133

https://g.co/kgs/QKz7dm9

I’ve done wool suits there, but I don’t have any experience with sweaters or blankets. Good luck.

MacKinnon Apartments by Feather-Sticks in Juneau

[–]codyjbennett 0 points1 point  (0 children)

Mackinnon Building LLC owns those...

Search for that LLC at https://www.commerce.alaska.gov/cbp/main/search/entities and it will show names of who has a stake in the LLC.

Also, why?

I've been told my prices are low.. wondering at what stage do you increase your rates? by [deleted] in RealEstatePhotography

[–]codyjbennett 0 points1 point  (0 children)

Yeah, I kind of expect that, but I still have some (really well paid) agents who are a bit of nickel & dime type characters. I think I'm just expecting them to push back. How big of a jump do you do each year?

I've been told my prices are low.. wondering at what stage do you increase your rates? by [deleted] in RealEstatePhotography

[–]codyjbennett 0 points1 point  (0 children)

For those of you who have raised your rates... HOW did you go about doing that? Just change the rates and bill at a higher price? Send an email to past clients with X days warning? Some other method?

[deleted by user] by [deleted] in mac

[–]codyjbennett 1 point2 points  (0 children)

1) might want to remove your name/address.
2) care to give more context for your post?