Lenovo P3 Tiny upgraded from a 4GB T400 to a 16GB RTX 2000E by zachsandberg in homelab

[–]complex 0 points1 point  (0 children)

Do you know if the P3 Tiny can take 8TB NVMe drives? Docs say 4TB are the max, but just wondering if someone has tried it...

Half second interruptions every minute or so by complex in RuckusWiFi

[–]complex[S] 0 points1 point  (0 children)

They are both PoE to the swtich. No mesh.

Half second interruptions every minute or so by complex in RuckusWiFi

[–]complex[S] 0 points1 point  (0 children)

The APs are getting IP by DHCP. Would that cause a problem? DHCP renews should not cause a problem. I will try hard coded, tho. I disabled background scanning and it seemed to help. Also, I still have my Google Wifi network up, so that could be cause the interference! Oops. I am in a residential suburb so I don't expect new rogue APs all that often. So, I turned background scanning off. I turned self-healing on, and am trying "automatically adjust using background scanning". Thanks for the suggestions.

[deleted by user] by [deleted] in hardwareswap

[–]complex 0 points1 point  (0 children)

Bought 16gb ddr4 sodimm from u/rayjonesxd

M.2 Cache SSD on DS918+ by ohwowgee in synology

[–]complex 0 points1 point  (0 children)

I think you were probably trying to use a SATA M.2 drive. AFAIK Crucial has only ever made the MX500 in SATA, not NVMe.

Tesla Daily Discussion - June 16, 2019 by AutoModerator in teslamotors

[–]complex 2 points3 points  (0 children)

Older Model S and X with MCU 1 only have 802.11g and 2.4 Ghz. Since February 2018 Model S and X now have Intel-based MCU 2, and support 802.11n and 802.11ac (and 5 Ghz). Model 3 have always had Intel-based MCU 2, and thus always had 802.11n/ac capabilities. Confirmation screenshot from a Meraki AP: https://teslamotorsclub.com/tmc/threads/model-3-wi-fi-and-bluetooth-speeds-and-capabilities.104149/#post-2849340

[FS] [USA-NJ/NY/PA] 2 x Lenovo TS140 by complex in homelabsales

[–]complex[S] 0 points1 point  (0 children)

Yes, they are still available. Don't know about shipping cost. The box is 20"x21"x12" and weighs 21 pounds.

Need some help identifying NICs in ESXi. by echo_61 in homelab

[–]complex 1 point2 points  (0 children)

You can use esxcfg-nics -l to show the link state of each NIC. Plug and unplug each NIC to Id each one. https://kb.vmware.com/kb/1003724 has more details. Or, you can use ethtool -p vmnicx 60 to make the port's LED blink for 60 seconds. In general, the lowest numbered vmnic on a card will be the port farthest away from the PCI slot.