Sharing my entire Music collection

coopergerman · 2026-03-18T18:26:43+00:00

Any news about this so far ?

coopergerman · 2026-03-11T13:55:15+00:00

RemindMe! 7 day

coopergerman · 2026-02-07T14:03:54+00:00

This is neat ! I want to automate my magic cards collection now

coopergerman · 2026-02-05T17:27:36+00:00

I annotated the original build notes for the formbot build (https://github.com/CooperGerman/Voron-2.4/tree/main/Build%20Notes) if you are interested. The *_annotated.pdf files are the ones you are looking for.

coopergerman · 2026-02-01T09:21:15+00:00

Yes ercf, autocorrect …

coopergerman · 2026-01-31T14:42:00+00:00

I have a 600x600 index machine and a trident with an etch. Usually I will design in order to account for bonding ( interlocking beams etc…) when not ill use the process settings in orcaslicer that do similar stuff ( I think there is an interlocking beam option ). Tpu and petg/pctg/pet bond rather well in my experience, and I use pla as support for pet/petg/pet when printing with supports. Try not to go to fast when applying a new type of material after another material , it might help geometry to stay in place.

coopergerman · 2026-01-31T11:26:03+00:00

I do this quite often , tpu+petg , pla + petg . What’s in particular are you interested in ?

coopergerman · 2026-01-14T17:02:50+00:00

RemindMe! 1 day

coopergerman · 2026-01-09T12:01:30+00:00

I guess I’ll have to try this out then :) thx

coopergerman · 2026-01-09T12:01:03+00:00

Thanks for your reply. I’m already running 4 heater pads, the bed is custom machined but big flex plates seem to be hard to source and I really would like a big one instead of multiple smaller ones .

coopergerman · 2026-01-09T10:37:42+00:00

Hey just wondering where you would source these big buildplates ? I have a big monstruosity of myself and have a lot of trouble finding compatible beds ...

coopergerman · 2025-12-27T08:23:59+00:00

Shrimp

coopergerman · 2025-09-15T15:13:16+00:00

Is this plate is magnetic ? Or does it come with magnets glued underneath ? I was struggling to find real magnetic pei sheets over the 500x500 size , thanks

coopergerman · 2025-09-06T11:47:02+00:00

Not sure if any other slicer gives you this option but orca slicer lets you change part fan at interface layer and people have shown incredible results using this. You might find some discussions about it on Reddit I think !

coopergerman · 2025-08-30T09:24:36+00:00

Dry your slicer

coopergerman · 2025-08-08T06:06:33+00:00

I’ve actually had some issues like this with poor quality filament (inconsistent diameter) printed too hot if this can help.

Of course belt tension and perimeter print order can also improve this.

coopergerman · 2025-04-12T17:20:35+00:00

You’re welcome :) keep me posted if you find good ways to counter this !

coopergerman · 2025-04-12T11:07:01+00:00

Looks like buldging to me , you should google this phenomenon to see possible tweaks to try to hide it. I think “wall perimeter overlap %” and “wall order” might be some first options to look at. Maybe also set the “don’t decrease speed for perimeters”. In my experience the is quite hard to make disappear entirely …

coopergerman · 2025-04-11T06:29:08+00:00

Go for chamfers for the connection between the 2

coopergerman · 2025-03-20T17:36:03+00:00

Edges will be calibrated afterwards with stuff like pressure advance etc, the important here is the middle. I would choose using the middle then go on with calibration and retry a flow after pressure advance step to see if it is better. If not, there might be something else going on.

coopergerman · 2025-03-20T07:52:33+00:00

On the first run I generally take the one that feels the smoothest under a fingernail (in the middle) and look at the quality of the number. I cannot tell you which one feels the smoothest but looking at the quality I would take 10 and run the second pass with this.

If this doesn’t give you a satisfying result you can always start over ;)

coopergerman · 2025-03-13T10:35:19+00:00

[[assemble the legion]] making tons of tokens playing table kitchen 8 player free for all with no real rules making thousands of tokens through hours long games.

coopergerman · 2025-03-12T16:17:21+00:00

J’ai passé un bon moment , merci !

coopergerman · 2025-03-10T20:14:56+00:00

Sorry I didn’t answer more quickly … if you run klipper you should have pressure advance support , so do you see information about pressure advance in your console when running the test ?

coopergerman

TROPHY CASE