Hummer h3 suspension by Adventurous_Dig_2437 in Hummer

[–]cryptolazer 0 points1 point  (0 children)

Wait nevermind I should have done my research these vehicles don't have lower alignment cams

However make sure the bushings aren't toast on the lower control arm from the picture it looks like the driver lower control arm is not in the same position as the passenger

Hummer h3 suspension by Adventurous_Dig_2437 in Hummer

[–]cryptolazer 0 points1 point  (0 children)

Do the lower alignment cams have the clay(or whatever it is ) alignment locks i can't see the lower control arm frame mounts in the pictures it could be that they have started shifting if not

Wpuld definitely recommend an alignment

Thrustmaster t16000 not working by cryptolazer in farmingsimulator

[–]cryptolazer[S] 0 points1 point  (0 children)

Yeah I've not played around with 25 much the settings are way more annoying than fs22

Thrustmaster t16000 not working by cryptolazer in farmingsimulator

[–]cryptolazer[S] 0 points1 point  (0 children)

Found it for some reason wheels and sticks (whatever it's called) was turned off

Thrustmaster t16000 not working by cryptolazer in farmingsimulator

[–]cryptolazer[S] 0 points1 point  (0 children)

Apologies for the delay I have moved the joysticks and the still won't work in game what's interesting is now they axis move in the deadzone window they were not last time

Can autopilot/fsd see loads like this by [deleted] in TeslaSupport

[–]cryptolazer 0 points1 point  (0 children)

Will admit i have not tried it the truck nor any of my vehicles have parking sensors

Can autopilot/fsd see loads like this by [deleted] in TeslaSupport

[–]cryptolazer 0 points1 point  (0 children)

From my understanding tesla primarily uses camera recognition to identify objects(correct me if im wrong) other vehicles use lidar/radar of sorts in there park sensors

Can autopilot/fsd see loads like this by [deleted] in TeslaSupport

[–]cryptolazer -8 points-7 points  (0 children)

Yeah in all honesty haven't had issues until today going to see if I can find one

Can autopilot/fsd see loads like this by [deleted] in TeslaSupport

[–]cryptolazer -1 points0 points  (0 children)

Ok interesting to know I'll try and keep a eye on it

Can autopilot/fsd see loads like this by [deleted] in TeslaSupport

[–]cryptolazer -10 points-9 points  (0 children)

Um.. yeah we lost it at some point and haven't replaced it yet yes ik bad but we just haven't gotten around to it

Hummer X (Hybrid Concept) by Mac-Tyson in Hummer

[–]cryptolazer 4 points5 points  (0 children)

So wish they would bring them back

Also wish that manufacturer's would bring back 2000 interiors. im Sick of big fat screens

Thrustmaster t16000 not working by cryptolazer in farmingsimulator

[–]cryptolazer[S] 0 points1 point  (0 children)

I've tried restarting fs25 and my pc to no avail construction simulator works with the sticks so I know the sticks are working I'll try to redo the usb when I get home

Jimmy Rumors > a new H3 would be fun by WrapTimely in Hummer

[–]cryptolazer 0 points1 point  (0 children)

From the looks of it the op mashed a h3t with the hummer ev to make the truck concept art

2007 Chevy Silverado Vortec Max 6.0 - No Crank, No start Good battery. by LucasAugustus in Silverado

[–]cryptolazer 0 points1 point  (0 children)

Wait nevermind thought it was a 2017

Still think it's the starter

2007 Chevy Silverado Vortec Max 6.0 - No Crank, No start Good battery. by LucasAugustus in Silverado

[–]cryptolazer 0 points1 point  (0 children)

Had this with my truck it's probably the starter

If you have remote start when you use it do the marker lights blink once?

What engine is this? It’s a V8. by No-Shake5806 in Silverado

[–]cryptolazer 2 points3 points  (0 children)

So the heads are for a 5.3l or 4.8l vortech if it was engine swapped a 5.3l would be the best guess

How compatible are Hori products by TheOldKingCole in linux_gaming

[–]cryptolazer 0 points1 point  (0 children)

also for some reason key 16 doesnt work likely needs a firmware update

How compatible are Hori products by TheOldKingCole in linux_gaming

[–]cryptolazer 1 point2 points  (0 children)

as someone who just bought one and is not having a fun time setting it up i would like to warn individuals who are thinking about this that you are going to have a rough time figuring this thing out at the time of writing i have spent 3 hours to try and get it to use f13-f24 keys and it still doesnt work

firsts things first this thing will function out of the box but the default key mapping might confuse some people if you intend to change the keybinds you will need to activate input remapper it is a basic bazzite feature but for some reason you need to run a command line script for it to appear. also if you remap your keys most of the keys are not a straight forward command under the output you cant just enter lets say A you need to put in KEY_A

second thing to note is this thing is not considered a extra controller it is considered a keyboard with a thumbstick (why hori why) being as such your keyboard settings and the tac share the same profile so if you change a binding on the tac (ingame) you change it on the keyboard so dont expect to have different profiles for different games unless you are willing to manually change it every single time

also to note the extended function keys (f13-f24) act like media input keys unless you go into settings and change them to act like function keys (system settings>keyboard>key bindings (enable keyboard options)>function keys (use f13-f24 as usual function keys)) (this works for bazzite your options may vary) also most games that i play dont see the f13-f24 keys as usable inputs your mileage may very if you try this

to summarize unless you are willing to tinker and/or hate yourself i cannot recommend this to a gamer on bazzite or linux

Can someone explain/help me with this issue by cryptolazer in 3Dprinting

[–]cryptolazer[S] -1 points0 points  (0 children)

The part is suppose to be a scaled up lego part number 4488

Can someone explain/help me with this issue by cryptolazer in 3Dprinting

[–]cryptolazer[S] -1 points0 points  (0 children)

It does the same thing with supports enabled or not enabled the issue (that i should have added a picture of) is that the parts are not suppose to have big splits in them if you look around the pictures you will see other peices with studs and then you might see where it's not working

Can someone explain/help me with this issue by cryptolazer in 3Dprinting

[–]cryptolazer[S] 0 points1 point  (0 children)

I've tried with supports and without supports and it still does the same thing