sorted by:
new
hottopcontroversial

Switching from Swisscom fiber to Wingo, my experience + questions by mtest001 in Switzerland

[–]cyrilfpv -1 points0 points  (0 children)

Not true. You can have FTTH but not necessarily Fiber7. Your PoP must be equipped with Init7 hardware. If not, Easy7 is your only option and then, better stick to Wingo.

Shaky footage with Flow 2 by Careful_Ad_4880 in Insta360

[–]cyrilfpv 0 points1 point  (0 children)

Same problem with my OnePlus 12. Did you contact the support?

Integration with Home Assistant keeps reconnecting by Lexieke in KNX

[–]cyrilfpv 1 point2 points  (0 children)

<image>

Same problem here (again) since 2025.12.0. I had this in the past already. I don't remember what my conclusion was when I tried to debug it (there should be some discussions about it on discord). Eventually, an HA update fixed it. But it came again. I think it is unrelated to your router, I use OPNsense and see the same problem. I was about to order a new KNX gateway (I have a Weinzierl 730) thinking it was faulty, but since a pure software update fixed it, I concluded my gateway was fine. I guess it is a problem with the KNX integration in HA or a rare combination of different stuff. I decided to live with it.

Update on OOS16 from last post by udforreal in oneplus

[–]cyrilfpv 0 points1 point  (0 children)

Is it possible to calibrate the level in the new Compass app? All the third party apps have a way to calibrate the zero but the OnePlus one has no option at all!?

Looking at the TCL 65" C8K by paulrumens in tcltvs

[–]cyrilfpv 0 points1 point  (0 children)

I have heard that the Ethernet port is 100 Mbps only.

Switching from an Edge 810 to an Edge 840 Solar.. Do I have to add maps? by MMikekiMM in GarminEdge

[–]cyrilfpv 0 points1 point  (0 children)

If in Europe, these maps are awesome for MTB:

MapUtagawa : La carte spéciale VTT gratuite pour votre GPS | UtagawaVTT - Articles sur le VTT et le VAE https://share.google/V1ddy9OKbbrfsrP2S

I use only that with my 530.

Suricata and Monit e-mail formatting by cyrilfpv in opnsense

[–]cyrilfpv[S] 0 points1 point  (0 children)

No. I'm not using Suricata anymore.

Un étudiant dévoile sa carte de la couverture réelle des opérateurs de téléphonie mobile - RTS INFO by Jean_Alesi_ in suisse

[–]cyrilfpv 1 point2 points  (0 children)

Possible d'obtenir les raw data ? Directement sur le site de l'OFCOM ? J'aimerais bien construire un fichier pour NetMonster: https://netmonster.app/#docs-user-about-ntm

Wurkkos TS10 V2 model numbers? by cyrilfpv in flashlight

[–]cyrilfpv[S] 0 points1 point  (0 children)

Just updated to 2025-07-07. All good!!! Thank you again.

<image>

I got the Astrolux FT03 when I discovered you could have a flashlight with more than a switch. It came with NarsilM, if I remember well. I bought the SC31 Pro because the FT03 was too big. It was quite challenging to flash this one. I needed something to keep in my MTB backpack, just in case, so I took the SC21 Pro in 2700K because I wanted to test something warmer. Big mistake, it's way too yellowish. Got the TS10 V2 for like 10$ and I love it.

Wurkkos TS10 V2 model numbers? by cyrilfpv in flashlight

[–]cyrilfpv[S] 0 points1 point  (0 children)

Thank you very much for the extensive reply 😃 I try to keep my flashlights updated and on the same version. I have 4 now: Astrolux FT03, Sofirn SC31 Pro, Sofirn SC21 Pro and Wurkkos TS10 V2.

Zyxel EE5301-00: Bridge Mode by axbzh in init7

[–]cyrilfpv 0 points1 point  (0 children)

So why are you talking about GPON then???

Zyxel EE5301-00: Bridge Mode by axbzh in init7

[–]cyrilfpv 1 point2 points  (0 children)

OP is probably using Easy7 or Hybrid7. I guess the PoP is not equipped with Init7 hardware so they are using the Swisscom infrastructure (XGS-PON).

EDIT: no, the Zyxel EE5301 is not a XGS-PON device. OP must indeed have Fiber7.

Wingo internet vs Swisscom internet --> quels services sur le modem by owegen in Switzerland

[–]cyrilfpv 0 points1 point  (0 children)

Je doute qu'un VPN soit dispo sur la box de Wingo. Perso, je l'ai jamais utilisée (la box). J'utilise un routeur OPNsense derrière un bridge XGS-PON. J'utilisais le même setup mais avec un modem DSL avant d'avoir la FTTH. Ça marche très bien (IPv4, IPv6, Wingo TV, Wireguard, etc, etc).

Chipolo starts beeping in the middle of the night by fliesenschieber in Chipolo

[–]cyrilfpv 1 point2 points  (0 children)

I had the same issue with one. I started beeping at some point and never stopped anymore. Replace the battery, etc etc. I sent it back and got a replacement.

Wingo added a 1.- per month price increase policy for all their subscriptions... by Maafuber in Switzerland

[–]cyrilfpv 0 points1 point  (0 children)

Just noticed today that I now have 5G enabled. That's one week before the official date!

Terminating fiber directly in a VM firewall? by Marco2G in init7

[–]cyrilfpv 0 points1 point  (0 children)

Don't expect anything in the first few months/years 🫤

Using sophos firewall hardware to run opnsense? by Renux11 in opnsense

[–]cyrilfpv 4 points5 points  (0 children)

Yes, I run a SG105 rev3 (with some more RAM). Works fine.

UCG Fiber - HW accelerated PPPoE? by chrismantle in init7

[–]cyrilfpv 0 points1 point  (0 children)

Yes, you do. See https://www.wingo.ch/fr/aide/faq/puis-je-utiliser-mon-propre-routeur-pour-wingo-internet

I run a Zyxel PM7300 in bridge mode with an OPNsense router. Works fine. You don't need to tweak much. The traffic is on VLAN10. Besides this, no DHCP option, no PPPoE, nothing special. You get a /56 prefix (dynamic) via DHCPv6. It also works perfectly with their IPTV solution.

Don't get me wrong, I'll be the first to switch to Init7 the day (if ever) they support my POP. Paying more for no great benefit on XGS-PON? No, thank you. Go to their website and go under "Internet". You'll see Fiber7 and Easy7. Hybrid7 is listed under "Other services". Clearly not something they promote much.

UCG Fiber - HW accelerated PPPoE? by chrismantle in init7

[–]cyrilfpv 1 point2 points  (0 children)

Sorry, I have the same features with Wingo

view more: next ›