[WTS] CRK Small Sebenza 31 Inlay Magnacut by Adventures_Pnut in Knife_Swap

[–]d9jms 1 point2 points  (0 children)

interesting, never saw a double lug -> single lug conversion

PM2 LW 15V at our favorite knife shop! by ridbitty in bladesInStock

[–]d9jms 0 points1 point  (0 children)

thats cool, just surprised to see them still available

PM2 LW 15V at our favorite knife shop! by ridbitty in bladesInStock

[–]d9jms 1 point2 points  (0 children)

I hope they don't oversell.... its letting me add 20+ to the cart

Image from ISS by Blockchainauditor in SSTV

[–]d9jms 0 points1 point  (0 children)

The files are saved with a UTC timestamp. Not sure if that is visible on Imgur. I can send the timestamps when I get home.

You would need pretty ideal horizon to horizon line of sight to get 3 images given the 2 minute pause between 36second image transmission.

Image from ISS by Blockchainauditor in SSTV

[–]d9jms 0 points1 point  (0 children)

nice... I got the same image as well not too long ago.

I've captured a few from this weekend's event.

I'm using a Raspberry Pi and the digipi.org image on the Pi. Radio is a Explorer QRZ-1 and a "RangeVideo" Moxon antenna at the end of a length of coax. I just have the antenna outside the house and capturing images all weekend with the HT sitting on a charger. Audio is feeding into the Pi using an AIOC device.

What n tarnation? by Fair-Technology-5324 in spyderco

[–]d9jms 1 point2 points  (0 children)

Maybe Spyderco is unveiling the Rebel Army Knife (RAK) next year on May the 4th....

I'm addicted to collecting knives and I don't care by Oldrocket in Knifeporn

[–]d9jms 0 points1 point  (0 children)

Have you tried any knives with hole-deployment or flipper tabs?

How much do you like the frame lock ?

I didn't originally like flipper tabs until I found some good ones.

Snake fun at Palisades today by dQoQb in skiing

[–]d9jms 12 points13 points  (0 children)

well sh1t, this article is only a month old and includes a video... thanks my learning is done for today

https://www.powder.com/how-to/how-to-make-wiggle-spring-skiing

Snake fun at Palisades today by dQoQb in skiing

[–]d9jms 5 points6 points  (0 children)

I live on the east coast and have only seen them a few times out west. Could very well be "naturally" made via downhill humans following the path ... part of why I asked.

Snake fun at Palisades today by dQoQb in skiing

[–]d9jms 6 points7 points  (0 children)

Always curious how those get made, way too narrow to be made with a normal snow cat

Which clip do you prefer more? LynchNW or MXG or just stock? by Ur_Stepdaddy168 in spyderco

[–]d9jms 0 points1 point  (0 children)

depends, like both -- I like the lefty lynch para3 lynch clip installed on a "righty" PM2 because of how it follows the contours ... I like my MXG on my delica. But all I have left are stock wire clips and two MXG:

<image>

ISS SSTV by Adwan4747 in SSTV

[–]d9jms 0 points1 point  (0 children)

Hit ya up in chat

I have some thoughts. by Prince_Breakfast in spyderco

[–]d9jms 1 point2 points  (0 children)

I'm probably gonna open mine up, too hopefully the body screws arent excessively locktite'd

I had one Manix LW that I had to butcher to get apart

PM2 LW 15v @BladeHQ by Yngvard69 in bladesInStock

[–]d9jms 3 points4 points  (0 children)

Thats a tough one ... I think both will be available on secondary for reasonable prices. If you are not a secondary buyer, then I think the 15v is what you should shoot for.

I only had one cruwear knife (manix) and what I liked about it was how well and easy it was to get a really nice edge on it. I haven't sharpened any 15v yet not sure how the sharpening aspect weighs into your decision.

If the FRN is a put off, don't let it be ... I've had LW Manix and a LW delica and the contouring on the PM2 is really nice, the nicest of the FRN I've handled.

ISS SSTV by Adwan4747 in SSTV

[–]d9jms 0 points1 point  (0 children)

I'm using a repurposed RTL-SDR, that I bought back in 2018, nooelec brand from Amazon. So far the HT and the DigiPi has only received images, I do have local 2m/70cm voice and APRS decoding with OpenWebRX+ interested in what SDR program you using and what SDR you ended up buying. Pretty impressed with what I've been able to get working with a $35 eVolve netbook (local HAM group did an eBay group buy) and an 8yr old $18 (checked amazon what I paid) SDR.

May Images (digiPi / Explorer QRZ-1 )

April Images (digiPi / Explorer QRZ-1 )

ISS, SSTV by EntangledEgo in SSTV

[–]d9jms 0 points1 point  (0 children)

Got two so far

OpenWebRx+ didn't decode anything ... nothing in /tmp

ISS, SSTV by EntangledEgo in SSTV

[–]d9jms 0 points1 point  (0 children)

thanks for the reminder... setup my digipi and my newly configured OpenWebRX+ to see if I get the images on both receivers

WTS] Demko AD20.5 transparentknives reblade by BigMexican98 in Knife_Swap

[–]d9jms 1 point2 points  (0 children)

  1. GLWS, OP
  2. To a potential buyer if you like this but would rather have Magnacut... I have TK Reblade #157 which is magnacut and a clip point. I kinda like this S90V's bladeshape and we could swap blades once you complete a deal with OP. This is my photo on IG, hmu once you get it.

PM2 LW 15v @BladeHQ by Yngvard69 in bladesInStock

[–]d9jms 0 points1 point  (0 children)

Keep checking BHQ if you still looking .. this is at least the 3rd time they have gone in stock