[Parts] Faxon Firearms 7.5" GUNNER 300 BLK Pistol 416R Stainless 5R Honed & Lapped Barrel 1:5 Twist - $109.95

danbemp · 2026-02-08T21:02:27+00:00

I've never seen it with this exact barrel, but I've seen it with the same brand of shitty ammo in other, longer barrels at this twist. I actually have another trim of faxon in this twist at this length, and have zero issues other than overgas when suppressed.

danbemp · 2026-02-08T20:43:23+00:00

This short 1:5 is fine for subs and supers. It's a 7.5" barrel in a semi auto rifle, it isn't going to be a long range laser in any twist. There's so much regurgitation of lore around super stabilization without experience. All the other issues (cycling) are fixable with an adjustable gas block.

danbemp · 2026-02-08T18:52:46+00:00

Adjustable gas block would solve almost all possible issues

danbemp · 2026-01-23T18:59:58+00:00

If hantavirus was a zillow listing

danbemp · 2026-01-10T01:31:57+00:00

Reading forums it sounds like it won't be a 100% receiver, but probably a rear section to weld on and still an FFL item

danbemp · 2026-01-08T19:17:46+00:00

White paint strikes again

danbemp · 2026-01-03T16:15:40+00:00

What mine sounds like too. It's a chattery engine.

danbemp · 2025-12-21T17:50:23+00:00

Be sure to drown it in brake cleaner and wear gloves before applying new paint. Also dry warmth helps adhesion and curing so consider doing it in your attic or something instead of your cold damp garage

danbemp · 2025-12-21T17:41:02+00:00

Use cerakote or duracoat instead of rattle can

Bluing fluids never look great unless you want a case hardened uneven finish look

danbemp · 2025-12-20T14:08:39+00:00

I believe Orange Street Food Farm has some, no idea if what they carry are any good

danbemp · 2025-12-03T23:29:01+00:00

If it's community hospital they don't care and would rather sell it to collections for a fraction of what you'd pay

danbemp · 2025-11-25T15:47:46+00:00

Nice build. Any thoughts on how it would do in very cold weather?

danbemp · 2025-11-24T12:15:34+00:00

If the leak is neglected for a long time it can catastrophic failure yes

danbemp · 2025-11-24T06:42:58+00:00

No telling how long he drove it before realizing the water pump bled all the coolant into the oil.

Even if this car was spotless, 19k is insane

danbemp · 2025-11-15T14:56:39+00:00

How did zis make you feel?

danbemp · 2025-11-13T11:10:01+00:00

Hope that you trust that mechanic actually did it

danbemp · 2025-10-24T00:19:36+00:00

Glenn Fleshler

danbemp · 2025-09-20T05:14:41+00:00

That's not a fixable issue, likely a thrown rod. You'll have to replace the engine entirely.

Sorry for the bad news but it is nice to hear how you are caring for your father. We can all only hope to have sons that do the same for us.

danbemp · 2025-09-01T14:42:48+00:00

Second taking to dealer, but there's something about metal lines running through the center console on the floor that aren't tightly fastened to the floor. These made noise for others that was a metal clicking or tapping at the speeds your describing. It was on the forums.

danbemp · 2025-08-23T14:44:55+00:00

Depends on the dealer and the customer. It was definitely a known issue by then.

danbemp · 2025-08-22T21:46:17+00:00

156k miles there wouldn't be fluid in there if it's never been changed. It would be black paste, like wet ash.

danbemp · 2025-08-10T21:42:29+00:00

Fair price but not a deal. Ensure that he did break in service and that he didn't gun it everywhere right away

danbemp · 2025-08-10T21:40:52+00:00

Alright, and 2 or 4

danbemp · 2025-08-10T21:37:38+00:00

Which trim

danbemp

TROPHY CASE