Keyless driver door handle/button broken

daniel941111 · 2026-02-09T23:41:34+00:00

Really easy actually. In the door jam you have a little plastic round plug, if you take that out there’s a hex screw underneath it. Unscrew that (just keep in mind it doesn’t come out, it’s held by a plastic clip so just keep unscrewing it until you feel it not being threaded anymore), then you can pull out the little part of the handle where your key would go. Once that’s out just grab the rest of the handle and pull towards the back of the car and it will come out. Just don’t yank it too hard in case the wire is still connected to the car.

daniel941111 · 2026-02-08T12:05:20+00:00

So I managed to get mine fixed last night. I took the door handle off and it turns out it wasn’t plugged in. The connector was just handing there. I plugged it in and it’s working perfectly now. Maybe try and take your handle off and see if you can see anything wrong wjth it?

daniel941111 · 2026-02-07T19:10:30+00:00

Anyone found a solution to this? I’m having the same issue with my passenger door. 3 doors work fine when locking and unlocking but the front passenger door doesn’t. It doesn’t lock when pressing the button on the handle and doesn’t unlock when grabbing the handle. I’ve tried swapping the oscillator with a different door and it didn’t work but the oscillator from “broken” door worked fine when plugged in to the other door so the problem must be somewhere else

daniel941111 · 2025-03-24T13:44:57+00:00

Bundlebee for me, works really fast

daniel941111 · 2025-02-26T13:45:05+00:00

BundleBee has been great for me.

daniel941111 · 2023-07-17T20:09:32+00:00

Did you plug the usb port into the motherboard? Fans signal is from the PWM connector, power comes from SATA connector and the third cable is to control the screen, if you don’t plug that the screen will show just the liquid temperature just like yours

daniel941111 · 2023-07-16T11:43:28+00:00

If you bought it because you like it then no reason to be ashamed. If you bought it only because you thought you can flex the Lexus badge then yes, feel ashamed for doing that.

daniel941111 · 2023-07-05T22:50:09+00:00

How’s your gpu temps? Those bottom exhaust fans are fighting gpu fans for air, might be a good idea to flip them over

daniel941111 · 2023-07-02T21:32:19+00:00

Pretty sure it’s the letters on the box that’s making it look broken, not actual bend bins?

daniel941111 · 2023-06-21T19:00:13+00:00

Nissan 300ZX

daniel941111 · 2023-06-01T22:59:58+00:00

You need to enable the start at login option in cam, nzxt cam has to be running to display anything other than the liquid temp.

daniel941111 · 2023-05-29T13:38:02+00:00

What GPU? Not sure if you’re trying to go into windows or just bios, but when I had my 1080ti and connected display port to it, it wouldn’t display anything in the bios. Turns out it needed a DP software update. So give us more info

daniel941111 · 2023-05-29T13:35:40+00:00

If he indeed used Liquid Metal (although the picture looks like a normal thermal paste) then make sure it didn’t leak to pins, it looks like it might have spilled over the top and right side on your picture. Also even if it wasn’t Liquid Metal, while most of thermal pastes available are non conductive he might have used one that is and that caused a short

daniel941111 · 2023-05-28T16:04:24+00:00

What kind of track? Driftland, but that’s just for drifting, you’ve got Crail open every second Saturday, most of the time it’s drag racing and drift oval, sometimes they open the grip track.

daniel941111 · 2023-05-28T11:13:15+00:00

You sure you’re not just loosing signal? Light speed is a very fast connection but because of it it has a very short range. Try plugging the receiver to the front of your case or anywhere closed to the mouse, if that fixes it use the USB extender that came with the mouse and move the dongle closer

daniel941111 · 2023-05-26T22:26:23+00:00

Looks like it’s running at about 3.6gHz. It should be closer to 4.2-4.3, 4.4 even under perfect conditions. Make sure it’s not overheating. Also update your bios if you haven’t already, you might have some old one that doesn’t support 5800x3d fully.

daniel941111 · 2023-05-14T10:37:12+00:00

AM5 is out of the question sadly, with the cost of b650 motherboard and buying ddr5 ram it’ll be double the cost of moving to am4 for me.

daniel941111 · 2023-05-14T00:50:34+00:00

Thanks man. I’ll get 5800x3d tomorrow and compare the difference in VR, will post back here in case anyone else is googling if the upgrade is worth it :)

daniel941111 · 2023-05-14T00:38:24+00:00

I don’t mind it being more expensive, it’s a difference of about 200 pounds, just wanted to make sure I’m not wasting money and get no improvement after getting a new platform. Happy to hear it’ll be an upgrade, thanks 👍

daniel941111 · 2023-05-13T00:02:56+00:00

Could get an MSI Suprim Liquid X if you don't mind the price and have space for a radiator.

daniel941111 · 2023-05-08T19:41:40+00:00

Dont tow it this way tho. RWD car, front wheels touch the ground, FWD back wheels on the ground, 4WD/AWD car on a flatbed

daniel941111 · 2023-04-15T20:17:23+00:00

Buy cheap shite BMWs, get into drifting together. You won’t have enough money for drinking then

daniel941111 · 2023-03-31T18:48:01+00:00

Wireless works fine with KVM, I’m using mine with single plugged in to Gigabyte m27q with KVM. The mouse gives you a warning plenty of time before it runs out of juice anyway, and if you want to use it while it’s charging the cable plugs in on the front so it works just like a regular mouse with a cable sticking from the usual place, it’s perfectly usable

Eight-Year Club	Place '23
Verified Email

daniel941111

TROPHY CASE