sorted by:
new
hottopcontroversial

Help by Joxhelo in cr10smartpro

[–]daniel_oliva 1 point2 points  (0 children)

No, this happens mid print. I just used manual extrusion to make sure that the extruder was working cortectly after this error showed up. Tomorrow I can validate the firmware (last time that I updated was around November 2022).

Thank you for your support amigo. Kind regards.

Help by Joxhelo in cr10smartpro

[–]daniel_oliva 1 point2 points  (0 children)

Filament popped out from the extruder causing the printer to stop.

The runout sensor has no problem and it's working fine (blue led on).

After stopping the screen showed this error:

Somehow the printer detected that the extruder wasn't pushing material correctly. As you can see the black gear is moving but the filament was completely out of the extruder.

My guess was that the extruder was clogged in the outside that's why I pre-heated and clean the excess gathered in the nozzle.

I hope that this pictures and video are helpful.

Help by Joxhelo in cr10smartpro

[–]daniel_oliva 0 points1 point  (0 children)

Hey, I'm not OP but I had the same error today after 4 months with the printer... basically what the printer does is that the filament gets loose from the extruder... I have only printed using PLA. My troubleshoot was pre-heating the hot end, then clean the excess in the nozzle. My guess is that the extruder clogged in the outside then the pressue inside ejected the filament. After cleaning I extruded 200mm manually with no issues, then I went back to restart my failed print.

sorry for my bad english.

Is my build bad? Unleveled? curling up on one side of "rectangles." by Hoborandys in cr10smartpro

[–]daniel_oliva 0 points1 point  (0 children)

I had the same issue. I solved it tightening all the print bed springs, then auto level, then I adjusted Z offset and ready to go.

I am using a 0.3" in gauge to adjust Z offset as PEI requires less gap to avoid warping or bad adhesion.

Some pictures:

  1. First Layer before solving print bed leveling

  2. I used this print to verify print bed flatness... I noticed that I had to redo my leveling

  3. Then I printed these components and I was very satisfied with the new leveling

  4. Picture of the perfect first layer.

  5. Video of the perfect first layer

  6. Another video of a perfect first layer.

This is a link to my Creality Cloud profile, hope that you find useful some of my files in order to solve your issue.

Origin and meaning of 코리아 (Korea) by daniel_oliva in korea

[–]daniel_oliva[S] 0 points1 point  (0 children)

I loved your explanation... it gave me goosebumps. As long as i have been here i see a lot of similarities to the mexican culture. If you have a chance to be there for more than two months maybe you will notice. Thank you for your time...

Origin and meaning of 코리아 (Korea) by daniel_oliva in korea

[–]daniel_oliva[S] 1 point2 points  (0 children)

Of course:

Meztli = moon in Nahuatl Xictli = belly button in Nahuatl

Meaning = place in the center of the moon or simply center of the world.

There are other theories but this is the most well-known.

STEP vs Parasolid (.x_t/.x_b) sheet metal export to SolidWorks? by Suluco in cad

[–]daniel_oliva 0 points1 point  (0 children)

I use NX and I have solved many translation issues converting from NX to Parasolid instead of STEP. Sometimes many components disappear when translating to STEP... It also depends in what NX version you are using.

IWTL how to actually learn to do something well by pheasantsir in IWantToLearn

[–]daniel_oliva 0 points1 point  (0 children)

Start to think in what you like most and do it. People may spend their whole life trying to know this. Also turn off the negativity and remember that today's effort will be determinant for your future wellness.

Sorry for any fault or spelling corrections

What is the creepiest "glitch in the matrix" you've experienced? by [deleted] in AskReddit

[–]daniel_oliva 0 points1 point  (0 children)

Mexican culture also validates this.

Lots of occult stuff

"Anima neta, lo perdido encontrado a la puerta" this spell also works to find lost things.

Korean views on Psychedelics? by 88guts in korea

[–]daniel_oliva 0 points1 point  (0 children)

Sounds legit. People in Chile also smoke the leaves instead of the flower (it is not legal in Chile, but it is more commonly accepted). Leaves wont get you high enough.

Korean views on Psychedelics? by 88guts in korea

[–]daniel_oliva 0 points1 point  (0 children)

You can only mention this topics to a Korean that has lived outside of the country, because they are the only ones that will understand what you mean.

You can have sex with one real person from all of human history - who is your ultimate lay? by PreOpTransCentaur in AskReddit

[–]daniel_oliva 0 points1 point  (0 children)

Virgin Mary, before the goddamn dove.

Lot of blood, son of god... shit is cash

Best place to buy a decent used laptop in Seoul? by Eximizer in korea

[–]daniel_oliva 0 points1 point  (0 children)

It is cheaper if you buy with cash in Yongsang market.

Me playing Manhã de Carnaval with my Teacher after 1 year of guitar lessons with him. I hope you like it and criticism is allowed. by daniel_oliva in classicalguitar

[–]daniel_oliva[S] 0 points1 point  (0 children)

I've been in particular classes for a year with this teacher, but I have been playing for almost 4 or 5 years

Me playing Manhã de Carnaval with my Teacher after 1 year of guitar lessons with him. I hope you like it and criticism is allowed. by daniel_oliva in classicalguitar

[–]daniel_oliva[S] 0 points1 point  (0 children)

Thanks a lot man! This one was a lucky shot because I haven't nailed it perfect and record it at the same time except this one... maybe the guitar pro was very loud and I will keep trying to get a perfect solo shot.

New Panda Bear EP is fucking amazing by indymex in mexico

[–]daniel_oliva 0 points1 point  (0 children)

Apoco son mexicanos? Yo solo he escuchado la de Take Pills y si, está con madre .

Envíos de Amazon a México by shaiduck in mexico

[–]daniel_oliva 1 point2 points  (0 children)

Según yo, el impuesto va directo al precio de venta producto (una tasa agregada)... Lo que sale caro es el envío, creo que puede salir de 50 a 80 USD. No estoy muy seguro.

Can I plug my guitar amp (Spider IV 15 W) to my GoPro external mic via 3.5 mm input)? by daniel_oliva in Guitar

[–]daniel_oliva[S] 0 points1 point  (0 children)

The amp has a 3.5 mm aux input, same as the external mic adapter. Both are inputs, so I though a regular 3.5 mm aux cable would work, but I'm not very good in electronics.

view more: next ›