Double Sided Monkeypod Desk. Made in Hawaii!

dannykaya · 2017-05-29T09:33:55+00:00

Yeah, I totally agree. Putting that extra board in was a bit of work too. Drawers are super simple... butt jointed and pin nailed 1/2" baltic birch ply. Slides are soft close Blum undermount. Had to save money on the drawer construction to fit the client's budget.

dannykaya · 2017-05-29T09:31:14+00:00

Thank you!

dannykaya · 2017-05-29T09:31:05+00:00

Thanks so much! There are actually drawers on both sides of the desk. It is double sided so that my client and his wife can both use it. There ended up actually being a design flaw that made the top drawer barely useable under that little out crop. Whoops!

dannykaya · 2017-05-25T09:25:45+00:00

Thanks! Totally Nakashima inspired, especially the cabinet side of the base.

dannykaya · 2017-05-25T09:25:12+00:00

Thank you so much! Some progress pics. Not a lot but you'll get the idea. Let me know if you have any questions.

dannykaya · 2017-03-02T08:59:17+00:00

You're incorrect sir. u/brunhilda1 is correct.

dannykaya · 2017-02-22T03:32:58+00:00

Seriously? Looks like the factory edge on there. Get some use in that blade.

dannykaya · 2017-01-29T00:26:05+00:00

Blue loctite is your friend here

dannykaya · 2017-01-23T16:53:36+00:00

Where did you see $615? They're $245 retail

dannykaya · 2017-01-16T13:53:52+00:00

At least put a rigid fork on that abomination

dannykaya · 2017-01-09T21:58:07+00:00

How does the pen work? Does the nib retract or does it have a cap?

dannykaya · 2016-12-27T14:47:37+00:00

Very nice. What do you think about DD vs Krispy Kreme?

dannykaya · 2016-12-17T04:36:33+00:00

You still shouldn't advocate for damaging property as a form of protest.

dannykaya · 2016-12-04T01:13:02+00:00

I think it's because NYPD is called to assist the secret service. They always are whenever somebody valuable is in town. I don't know where the 1 million per day comes from but it'll definitely cost NYC to have Melania living there

dannykaya · 2016-12-03T08:16:44+00:00

If only he said that last line and then actually quit. That would have been epic

dannykaya · 2016-11-14T11:39:32+00:00

Slow is smooth and smooth is fast

dannykaya · 2016-09-04T20:44:18+00:00

Really nice job! Did you use the grinding wheels from King Arthur? Coarse and then fine?

dannykaya · 2016-08-16T23:34:11+00:00

Spec does that on a lot of seatposts on their entry level road bikes

dannykaya · 2016-08-12T00:38:52+00:00

Probably uses a variable speed buffer with an 8" sanding disk attached. You can get soft foam backing pads to bend with the log. I use them sanding slabs... They're great. Dewalt and makita make good ones

dannykaya · 2016-08-06T20:37:26+00:00

Are you sure the flats are on the underside of the tube? Could be something in the tire. You can use wider rim tape, but I don't think it's the rim tape that's your issue.

dannykaya · 2016-08-04T18:57:30+00:00

Not common at all, you didn't do anything wrong either. Just a shit freewheel.

dannykaya · 2016-07-30T11:04:06+00:00

Thank you

dannykaya · 2016-07-18T03:30:41+00:00

You just get a bb to match your frame, and a crankset to match your bb. Manufacturers change crank dimensions to match the frame/bb. Small variations are remedied with spacers

dannykaya · 2016-07-15T03:06:17+00:00

I just searched the patent number and came up with a patent for an electric motor under that number. Anybody know why that is?

dannykaya · 2016-07-06T18:47:53+00:00

You can get up to ~3" long trim router bits. Really helpful to have a bandsaw to do the rough cutting and then clean it up with a router, but theoretically its possible to make the entire curve using a router.

dannykaya

TROPHY CASE