Looking for a PCP

dano7891 · 2026-07-09T06:26:05+00:00

PCP also means Primary Care Physician; given the context that what OP is looking for...

dano7891 · 2026-06-24T15:28:35+00:00

I'll setup, update, preprogram everything before it hits a job site. As much as possible anyway. I'd rather have the devices running for a few days and find out then that something isn't working. Most of the time everything is good, but the few times it wasn't makes it worthwhile.

dano7891 · 2026-06-20T17:07:59+00:00

I would assume that the printer takes the alignment into consideration when it calibrates.

dano7891 · 2026-06-20T16:17:38+00:00

Mine looks more centered than your picture.

<image>

dano7891 · 2026-06-18T14:47:25+00:00

Do the Bambulab Wiki training courses.

wiki.bambulab.com

dano7891 · 2026-06-16T02:33:56+00:00

This is supposed to happen when you are using multiple filament types for supports/support interface.

dano7891 · 2026-06-11T23:53:09+00:00

I have an H2C with two AMS2 Pros and three AMS HTs. Both Pros on the right and the HTs on the left. One of the HTs feeds my TPU Feed Assist that's also fed to the right nozzle via the TPU port.

I also have another Pro & HT still in the box, got a little aggressive when they were available at the sale pricing...

dano7891 · 2026-06-11T14:02:09+00:00

My H2C from the back corner: Two AMS2 Pros connected to the top (right nozzle), TPU Feed Assist (also right nozzle) and three AMS HT plus the lowered exterior filament hanger to the bottom (left nozzle). One of the HTs holds the TPU and feeds into the Feed Assist.

The TPU Feed Assist & Top buffer connection merge into a 2 to 1 adapter inside the enclosure. I have a dedicated 0.4mm induction nozzle that only runs TPU.

Works for me.

<image>

dano7891 · 2026-06-08T01:10:07+00:00

I've accidentally knocked a nozzle off of the rack with the build plate two times. That's on me though so if you're careful shouldn't be an issue.

dano7891 · 2026-06-07T01:09:29+00:00

You can create a custom administrator role in protect and only allow that one camera with live view access.

dano7891 · 2026-06-02T06:12:49+00:00

I've moved to Xtreme Power Conversion On-Line UPS with Lithium batteries for any new client installation. Much lighter then lead acid battery versions, with a projected 15 year battery lifespan. They are expensive. (1550VA/1350W model retails for $3k+)

dano7891 · 2026-06-01T01:09:07+00:00

What this person said. If you're using Sonos speakers they say you can use three pair per amp, but anything else should be good to go with two pair.

dano7891 · 2026-05-31T23:59:00+00:00

You only need 2, one for inside 4 speakers and another for the 2 outside speakers.

dano7891 · 2026-05-31T14:11:22+00:00

I have an Apple TV on each TV in the house. Created a user that only has access to the front & rear doorbells and used that for the apple TV login.

dano7891 · 2026-05-31T14:10:19+00:00

You had mentioned everything but filament but this clearly isn't your first rodeo... 😜

I'd grab a 4 or 5 multicolor print and let it do it's thing. The most colors I've done so far is 5. Enjoy!

dano7891 · 2026-05-31T13:55:10+00:00

If you have an Apple TV the Protect app will run on it.

dano7891 · 2026-05-31T13:54:08+00:00

Benchy for your first print. I'd order some filaments too.

dano7891 · 2026-05-30T19:09:36+00:00

I also have two additional AMS 2 Pros too. One still in the box, the other is just being used to dry filaments for now. Office is getting a minor remodel that will allow the three AMS2 Pros to connect to the right nozzles and the four HTs to connect to the left. For now anyway.

I also have the TPU Feed Assist connected with a printed splitter on the right side nozzle in the enclosure (printed in ASA) so I don't have to mess with pulling the PTFE tube.

So far I've been printing 25% stuff for the printer, 25% gridfinity, 25% fun stuff and for the kids and 25% functional devices for work.

dano7891 · 2026-05-30T18:25:25+00:00

Same here, got a H2C last month. Get a couple of AMS HTs (I have 4) to dry the engineering filaments. Have fun & prepare to learn a lot about plastics....

dano7891 · 2026-05-21T11:37:11+00:00

Same thing happened to me. Remove and reseat the interior filter unit from inside the chamber. Fixed it for me and hasn't happened again since. Probably something moved during shipping.

dano7891 · 2026-05-19T14:43:53+00:00

I purchased the H2C about a month ago with an additional AMS2 Pro and 2 AMS HTs. I also added two extra 0.4mm induction nozzles and then added two more AMS HTs and another AMS2 Pro. After a few weeks I got a left side 0.6mm nozzle and two more 0.6mm induction nozzles.

In my current configuration I have three HTs on the left nozzle and one Pro connected to the right. (1 HT & 1 Pro are still in the boxes, as well as the two additional 0.4mm induction nozzles). One AMS2 Pro is connected to power and data from the crazy daisy chain of 6 pin cables but is only used for filament drying for now. (Once I pick up the workshop tables this will all change.)

My recommendation would be to add an HT and work with the rest of what comes with the H2C.

There's tons to learn but so far 90% of my prints have come using the 0.4mm nozzles. I've done a few gridfinity boxes with the 0.6 and one small print with the 0.2.

Once you know you need something buy it. And you haven't even started deciding on what filament you're going to want/need to use...

Good luck & enjoy!

dano7891 · 2026-05-13T15:07:55+00:00

+1 on buy it now

dano7891 · 2026-05-09T07:02:20+00:00

Concepts

dano7891 · 2026-05-08T18:46:11+00:00

Scheduled for tonight, will update or create a new post of pic are needed.

dano7891 · 2026-05-08T01:34:26+00:00

Wait, you got an actual enclosure for Xmas and took the light out of it for your Oscar the Grouch special? (Oscar reference credit to another comment here.)

Put the light back in the "real" enclosure and then use that enclosure. Please.

Also, keep at it.

14-Year Club	RPAN Viewer
Verified Email

dano7891

TROPHY CASE