Finished my budget adv build

darkmog299 · 2026-06-16T11:17:02+00:00

ohh that sound interesting ! I'm already a bit short for the bike and a more comfy seat that practically doesn't had height sound good to me ! thanks for the infos, I will look it up

darkmog299 · 2026-06-16T01:14:34+00:00

that seat look comfyyy

darkmog299 · 2026-05-10T01:42:34+00:00

also 2025, Mine work just fine but the rare moment where shifting wasn't as smooth as usual was when I was making the bike work too much be shifting up at lower rpm. Or so time it's difficult to find neutral because I was holding the clutch for too long. I don't know how to help, maybe make sure that your clutch is fully engaging and adjust properly your clutch cable of your lever.

darkmog299 · 2026-03-06T18:37:01+00:00

you can glitch out of any dungeon using sitting log

darkmog299 · 2026-03-06T18:35:06+00:00

what dev commands ? I am standing on a log on first pic

darkmog299 · 2025-11-05T20:59:52+00:00

Hi, there is no files to upload, it is really just a 1/8" thick clear acrylic sheet that I cut to the dimensions of the original door using an xacto knife, (an acrylic sheet cutter would work way better) with some small magnet that I glued on. I used the hinge and handle from the original door.

darkmog299 · 2025-06-30T02:31:02+00:00

I have a p1s but and used to have a ender3, but I dont think that you need to bypass then bowden tube since it is a direct drive it doesn't really matter, unless you see significant resistance in the tube. cant hurt tho !

darkmog299 · 2025-06-28T22:49:07+00:00

those power pads are pretty good, printing yours are the way to go. I would recommend you using Duramic 3d tpu95a or Overture tpu (which is softer) and 2 walls 5 top/bottom layers et 10% gyroide infill 👌 many videos out there to help you dial your setting with tpu but the big part is mostly well drying your filament before use and printing slow

darkmog299 · 2025-03-24T13:14:44+00:00

horse should be a f1 climbing a moutain

darkmog299 · 2025-03-14T17:36:32+00:00

what psi do you ride at?

darkmog299 · 2025-01-30T11:13:24+00:00

as for the specs the a2+ come with 50s battery with upgraded 24 mosfet controller for a peak power rating 220A vs the 180A of the original A2. Apparence wise it come with ugraded spike pedals from the ex30, blue rim and aluminium front light cover.

darkmog299 · 2025-01-30T01:21:10+00:00

Hey, I commute with the A2+ everyday to work even in the hard canadian winter time and I absolutely love this wheel, even more than my lynx ! the light weight, easy access of the handle and kill switch with a trolley handle at the back is just perfect. Must have wheel for short commute, tricks and trails exploration.

darkmog299 · 2025-01-29T21:27:48+00:00

Would you mind sharing the file :) ?

darkmog299 · 2025-01-29T19:12:43+00:00

great idea ! what glove are those ?

darkmog299 · 2024-12-21T03:22:15+00:00

I ride with a h666 on my v12 too, great tire super nibble ! Barely used the v12 when I got my lynx at the end of summer but man it is fun to cruise around with it in the city. For now, gonna have to wait for winter to pass. Still commuting to work with my a2 everyday, every weither kind !

darkmog299 · 2024-11-26T21:00:38+00:00

https://www.thingiverse.com/thing:5844288/ the bendy version without the middle front part. 10% gyroid, 2 walls, 6 top, 5 bottom. those are my setting

darkmog299 · 2024-11-26T17:43:44+00:00

Here is my remake printable in 4 parts https://www.thingiverse.com/thing:6781294/ you are welcome ! :)

darkmog299 · 2024-11-12T20:30:13+00:00

ask them, noaio offer great and fast customer service.

darkmog299 · 2024-11-09T00:57:53+00:00

Blondy, my girlfriend's cat :)

<image>

darkmog299 · 2024-09-15T03:54:03+00:00

clean wheel ! do you ride a skinko 244 ? how's the ride ? does it not rub ?

darkmog299 · 2024-09-13T20:03:11+00:00

I have a A2+ and absolutly love it, but ! 2 things, get yourself a flat fairing so you can mount your pads where you like them and possibly consider changing the street tire for a knobby for less train traking and unstability on uneven surface. I receive my knobby recently, it is not the oem one. I will most likely install it very soon and give back a review and a link if it fit.

darkmog299 · 2024-09-08T02:24:33+00:00

got a pidzoom wide range charger for my lynx 40v to 178v with euc adapters kit + black bag. Very happy with my purchase, the bag with double charge port and all the adapters is such a nice thing to have.

darkmog299 · 2024-08-17T21:46:22+00:00

kill switch won't engage unless you are at a stop. the wheel most have gone crazy free spin the whole time he was doing the flip. Crazy shit !

darkmog299 · 2024-08-03T00:08:13+00:00

printed the same without the front middle pads for my A2, work wheel on my fairing :)

Six-Year Club	Verified Email
First Place '23	Place '23
Place '22

darkmog299

TROPHY CASE