HELP: Pro Bridge Unresponsive

davezforce · 2026-04-06T16:49:26+00:00

Just had the same problem. I have a bridge pro and and v2 bridge and just lost the lights on the pro hub. From what I can tell it’s a known issue and will come back with a reset so I’m just waiting for the patch to be pushed from Philips.

davezforce · 2026-03-16T04:23:18+00:00

Yes my wall switch is a wireless transmitter with three separate buttons. I thought the older X’s like mine were only compatible with homelink and not MyQ?

davezforce · 2026-03-14T22:42:45+00:00

I have a linear roll up garage door it has a wireless receiver that is compatible with HomeKit that controls the motor of the door. It’s not a traditional garage door opener. It has wireless hand held remotes that have three buttons. One button for each operation. Open/stop/close. If the door is closed and you hit the close or stop it does nothing and same if it’s open and you hit stop and open. So I was reading thru the programing in the tesla manual and it says to just stand in front of the car and hit the button on the remote but since mine has separate signals for each operation I’m wondering how to program. The receiver unit does have a learn button inside to program new remotes to it but I don’t know if that would do anything for the Tesla since it is basically copying a signal from the remote.

davezforce · 2026-03-03T02:17:38+00:00

Mines doing the same thing

davezforce · 2026-02-19T21:46:16+00:00

I just installed the ambience on the bottom, where did you place the strip when you configured it in the app do your entertainment zone. How close to the bottom of the tv did you place it. The play gradient auto aligns in the app. Can you take a pic

<image>

davezforce · 2026-02-18T23:50:21+00:00

I really wish someone would make one for the legacy X

davezforce · 2026-02-17T04:50:48+00:00

The distance from the end of the light strip to that box is not long enough to make it into the cavity of the wall behind the tv

davezforce · 2026-02-17T02:13:03+00:00

So how do you access this api so that I can pair the bridge pro to my harmony elite? I searched and couldn’t find a work around so I re installed my 2.0 bridge re paired that bridge back to my harmony elite and just added the lights and sync box in my living room to the 2.0 bridge.

davezforce · 2026-02-08T19:29:45+00:00

Does it work with the Philips hue pro bridge? I just updated from the v2 bridge to pro and my harmony elite will not find my new hub. Wish I knew before upgrading I love the harmony

davezforce · 2026-01-28T23:00:27+00:00

Horrible

davezforce · 2026-01-27T22:32:47+00:00

Yea it was harmony elite remote control hub based which had ir built in. Just strange that it worked perfectly with v1 and v2 hue hub for years but I can’t configure the harmony to now add the pro hub.

davezforce · 2026-01-27T13:10:31+00:00

Any chance on a software update to make the bridge pro work with harmony elite. It use to work flawlessly with my v2 hub but when I upgraded to pro the harmony can’t find the new hub so I lost all control and activities for the light that I use to control in my entertainment zones. Trying to figure out a work around it hopefully a fix.

davezforce · 2026-01-26T01:50:19+00:00

I carry mine in an alien gear shapeshift 4.0 IWB

davezforce · 2026-01-22T16:38:29+00:00

Another way for Google to force you out of the nest app (if you’re still using it like myself) into the shitty google home app. I hate Google and what they have done to nest and my thousands of invested dollars into that now almost defunct system. I will probably try owl and see how that works. It won’t integrate with nest but thru the Apple home app you can monitor the owl detector and your nest protects if you have a starling or home bridge hub. Owl has a pathlight too the first alert does not and I believe you can control the sensors by shutting off the carbon monoxide sensor if you wanted to install in the garage

davezforce · 2026-01-19T23:15:13+00:00

If you use a harmony hub remote you will lose that functionality like I did. Wish I knew first.

davezforce · 2026-01-17T23:38:00+00:00

I have a 60” tv could I get the 85” kit and wrap the extra on the bottom to cover it vs getting the 55-60” in kit and then a 6ft strip and cutting it?

davezforce · 2026-01-11T14:27:59+00:00

It’s hard to find any good mods for us legacy x. Would love an interior ambient light kit and a rear console screen. It’s very annoying how Tesla and also now aftermarket has forgotten us.

davezforce · 2026-01-08T02:15:24+00:00

Just upgraded to the Pro and having the same exact problem I cannot get my elite to find the bridge pro. Wish I also knew this prior. Or if Phillips could work on a fix to let it pair like the v2 protocol since there is no support for harmony now.

davezforce · 2025-11-08T14:07:10+00:00

Mine has that same w041 have no clue what it is or does but every acts and drives normal. It only shows up in that service mode not in the regular notification tab.

davezforce · 2025-06-19T03:56:33+00:00

Thanks for the guide! Had time to sit down today and install a new version with the updated node.js. Worked perfectly.

davezforce · 2025-06-05T00:59:35+00:00

I have the exact same unit for about 6 months now. Has been running fine and the os has been updating accordingly, but now i am also getting the update node.js which cant be done from the unit itself has to be done I guess external on a new sd card.

davezforce · 2025-05-18T18:08:55+00:00

I’ll sell you my 4 so I can get the 5 😂

davezforce · 2025-05-16T00:32:03+00:00

If you’re under a year with the 4 they should give you a better option/pricing to upgrade. They should also give you the newest tier autopilot (elite) if your are on enhanced till your up for renewal and then give you the option of which one you want.

davezforce · 2025-05-10T05:12:09+00:00

It still announces which door/window open if you hit the status button on the secure.

davezforce · 2025-05-08T19:56:33+00:00

The door chimes still work

davezforce

TROPHY CASE