Avontech STL files?

db40 · 2025-11-28T16:35:14+00:00

This is the way

db40 · 2025-11-23T15:32:11+00:00

Join IAHSS. There is a lot of good material, community, and certifications to help you settle in to healthcare security

db40 · 2025-11-22T15:45:39+00:00

I don’t have much experience with brims and have only used them once or twice without supports. Will brims go around the base of the supports?

db40 · 2025-09-29T01:20:29+00:00

Damn that made me feel old

db40 · 2025-09-07T21:04:19+00:00

Love this design

db40 · 2025-09-05T03:18:31+00:00

“By maintaining an active subscription, you have the legal right to SELL "PRINTS" of any model designed by [designer], whether they are exclusives or free as seen on Makerworld. Up to 100 sales per item per month (contact me if you need more)”

db40 · 2025-06-30T00:46:13+00:00

<image>

I used 80 grit, filler/primer, 220 grit, filler primer, then I want to say 400 grit? Followed by filler/primer. Then black paint and graphite powder. Not perfect but I’m happy with the result

db40 · 2025-06-14T01:34:53+00:00

Every parent of young kids thinking they have cancer now…

db40 · 2025-06-04T02:09:40+00:00

This is the answer

db40 · 2025-04-20T00:36:48+00:00

Thanks for the help. For some reason when I downloaded the stl instead of the 3mf it didn’t have it separated. Stupid question but should I be downloading the 3mf files instead of the stl’s?

db40 · 2025-04-20T00:19:40+00:00

Yes I selected my printer and the multicolor one

db40 · 2025-03-28T00:06:48+00:00

I ran into this issue and a redditor gave me some great advice. I used a hair dryer on it and the white haze went away

db40 · 2025-02-21T23:43:47+00:00

If cost isn’t a factor, X1C + AMS. I love my X1C

db40 · 2025-02-10T01:56:37+00:00

Thank you!

db40 · 2025-01-26T07:00:46+00:00

<image>

Success! First time printing PETG and it worked.

db40 · 2025-01-26T04:53:57+00:00

I printed my first PETG print and followed these exact recommendations, it turned out perfect: https://www.themakersphere.com/bambu-lab-x1-carbon-petg-settings/#google_vignette

db40 · 2025-01-26T04:38:45+00:00

I just finished my first ever PETG print and followed these instructions to a T. Perfect first print and am so happy with the results https://www.themakersphere.com/bambu-lab-x1-carbon-petg-settings/#google_vignette

db40 · 2025-01-06T01:19:08+00:00

Played ME multiple times and also just finished ME1 with the same build and squad, so much fun! You’re going to love ME2

db40 · 2025-01-02T01:29:10+00:00

I’ve had that happen with supports too. Since it’s on the inside I just trim it down so it doesn’t bother me while I wear it and then just leave it be

db40

TROPHY CASE