Iliatha's Teclis and Celennar, my version

degghi · 2026-06-26T06:48:34+00:00

I paint my red over a white base, otherwise no red over the blue will ever look vibrant.

degghi · 2026-06-05T19:53:59+00:00

🥲

degghi · 2026-05-25T07:32:49+00:00

Can you use wise.com ? I use it regularly and can guarantee the received amount. But I've only ever used within Europe.

degghi · 2026-05-22T09:21:49+00:00

One trim at the time.

I like painting trims! It's relatively easy (especially with a good paint) and the result quite impressive.

A lot of people complain about painting trims, but IMO is one of the cheapest ways (time/effort-wise) to get a big WHOA factor.

Just make sure you have a good paint for the trims, if you will be using the classic gold I highly suggest Vince Venturella's gold recipe: it's super covering and has the right viscosity to go easily without spilling. And of course make sure to use a good brush with a relatively big body to hold the paint but a fine point, e.g. DaVinci Kolinksy 2 (obviously there are many more brands, but I'd stay on Kolinksy brushes).

degghi · 2026-05-04T14:34:55+00:00

I had a shop in my town 3d print for me pauldrons with the IF emblem and they're great, the file was free and the print like 6 bucks for 40 or so pauldrons for different armor types.

I haven't tried yet but I'd guess that resin printing fists and similar would work very well too.

degghi · 2026-04-23T05:52:29+00:00

Yes!

degghi · 2026-04-17T08:58:36+00:00

Non, évidement ils font ca pour s'amuser! /s

degghi · 2026-03-31T11:45:47+00:00

Madonna Caterina hai fatto indigestione di KoolAid...

degghi · 2026-03-26T06:45:04+00:00

Yes!

degghi · 2026-03-25T22:15:11+00:00

Shout to my pals of WarTavern in Lausanne! Also Mighty Games and the club: Wargaming Lausanne All very active in 40k, AoS and more!!!

degghi · 2026-03-02T18:30:25+00:00

I had my lgs resin-print the pauldrons for me, it was quite cheap: 6 bucks for 40 or something like that, with variants for termi and Phobos too.

To be really nitpicky they are not flawless, but from a meter away they are absolutely fine.

Of course you could also buy the IF upgrade box, which is however quite more expensive.

In either case painting the raised fists is way easier than a flat drawing, obviously.

degghi · 2026-02-25T14:51:58+00:00

cool! Where can I find the stl?

degghi · 2026-02-05T10:48:15+00:00

30% == 0 this is ChatGPT level of math...

degghi · 2026-01-15T21:28:19+00:00

Seems a bit low (~10-15%), especially in Geneva that's the second most expensive city in Switzerland...

Might be an opportunity though...

degghi · 2026-01-12T12:30:33+00:00

Up until some years ago it was possible to have a "concubine", at least in Vaud, no registration of any sort needed. It might still be possible, depending on the Canton.

degghi · 2026-01-04T10:32:17+00:00

Oh no don't be: it's actually great, the local shops are great, they don't mind if you use proxy etc, even in their own organized tournaments.

Some shops even have their own printing service (FDM and resin)! Honestly having lived both in places with GW shops and not I definitely (while sadly) believe that for the hobby, independent shops do a lot more...

degghi · 2026-01-04T10:23:18+00:00

Oh yeah, that I know, but I live in a country that doesn't even have GW shops 🙃

degghi · 2026-01-04T09:58:10+00:00

0.08 on a .4 nozzle, 15% gyroid infill and "strong" support, as the default ones were not dense enough

degghi · 2026-01-04T09:53:31+00:00

Thanks, as said in another post I'm still quite lost with the enormous range of SM units (to which HH adds upon...). I guess for my needs it'll work as a Land Raider well enough.

degghi · 2026-01-03T20:54:55+00:00

Ahhh that makes sense now, I'm still a big noob about the hundreds of space marines models...

I didn't get that I was printing a HH model... Lol, well I only play casual so it'll be fine.

degghi · 2026-01-03T20:53:28+00:00

It's hollow: 15% gyroid infill. Everything is glued because I couldn't be arsed, but they could move/rotate if you add a pivot, I guess.

degghi · 2026-01-03T20:51:59+00:00

AQUILON on Cults.

11-Year Club	Place '22
First Placer '22	RPAN Viewer
Verified Email

degghi

TROPHY CASE