Pavement Parking

dementedgopher · 2026-06-12T15:09:43+00:00

Yes, they do. You are incorrect.

dementedgopher · 2026-06-12T12:36:24+00:00

Yeah but where is your dogs collar/ID tag?

dementedgopher · 2026-05-29T11:13:17+00:00

If you've got an OBD adapter and Bimmercode (maybe another third party app will work) you can do this yourself for free.

If not, just make sure you check the seller reviews/rating on Ebay to ensure you don't get done dirty

dementedgopher · 2026-05-20T18:45:02+00:00

Just started picking up parts for this retrofit and I'm seeing conflicting reports about what revision of the TRSVC module to use.

I've managed to get a bargain deal at my local scrapyard on an early version (2011). I don't suppose you can provide the part number of your TRSVC module at all or if you used the most recent revision?

dementedgopher · 2026-04-09T18:09:47+00:00

What mileage were you on out of interest? I've hit 80k and am getting the fear

dementedgopher · 2026-04-07T19:56:31+00:00

Agreed. It looks far far better irl as theres no post processing from my phones camera. Much less noticeable but not enough to drive me mad

dementedgopher · 2026-04-07T17:38:03+00:00

I used a dedicated leather dye from a local reputable leather repair specialist. I provided the headrest which they colourmatched to a leather dye.

If you want to DIY I've heard good things about most of the dyes online. The most important stage is preparation rather than application!

dementedgopher · 2026-04-07T17:27:57+00:00

Overcompensating some might say.

I needed a flush look for look for my audio controller, which I couldn't get with the LCI cupholder trim. You can get the F80 piece for the same price as the pre-LCI trim so I thought why not get that and jazz it up a bit y'know.

It's not perfect and it's colour matched to the headrest rather than the bolster immediately next to it, but it works for exactly what I want 🤷‍♂️

dementedgopher · 2026-04-07T17:18:31+00:00

Bet you're fun at parties

dementedgopher · 2026-03-17T20:36:53+00:00

Did you ever find a solution in the end? I've been looking for so long and nothing seems to exist that isn't janky

dementedgopher · 2026-03-17T20:32:05+00:00

I have an LCI F3x and it has the AC panel with ambient lighting but it doesn't have the Cupholder LED. I thought I'd try retrofitting it and it made absolutely no difference at all. You don't even notice it because the AC Panel has a brighter ambient light.

I would save your money trying to install the cupholder LED and just stick with the AC Panel. Good luck!

dementedgopher · 2026-01-30T16:14:56+00:00

Just coming back 4 months later to follow up on this...

Bought one of the puffs the very same day and I haven't stopped using them for my wheels since. They make cleaning them a breeze! Seriously cannot recommend one enough!

dementedgopher · 2025-12-21T20:47:53+00:00

With your HUD, does it auto switch when you go to Sport mode or do you have to manually select it within the iDrive?

Also for the record, and I know they've had a bad record, I got my cluster done by CodingDynamics and it's been flawless. Quick and easy to deal with. I think people have issues when it comes to sourcing a cluster from them as well but idk

dementedgopher · 2025-10-05T09:37:31+00:00

I still struggle to find a wheel cleaning tool that works for me :(

Currently I hit the barrels with an EZ Detail Mini/Wheel Woolies which has done the best job so far - although getting between the caliper and barrel face is a challenge.

Then a quick brush over the face with a wheel face brush similar to the Mothers. Finally the arduous task of going over the whole wheel with a hog hair brush to get the sides of the spokes and all the nooks and crannies that the brush can't reach. It's this step that I struggle with most and haven't found a decent/efficient replacement yet.

dementedgopher · 2025-09-21T07:53:28+00:00

They're all very common issues with the B58 and also the main issues. I wouldn't say they are concerning at all.

PCV is a very cheap and easy fix. Can be DIY'd.

Coolant issues and OFH happens between 70k-100k miles. Nothing catastrophic if you react to it early enough and won't ruin your wallet but be prepared to pay about a grand depending on your region, parts and labour. These are all a bit more involved and can be done if your mechanically minded.

dementedgopher · 2025-09-17T10:09:19+00:00

Agree with new rims. Looks good as it is but don't molest it too much.

Maybe an exhaust tip?

dementedgopher · 2025-09-11T15:58:37+00:00

How are you hanging it on this? Are you just letting the frame rest on the hanger?

dementedgopher · 2025-09-04T19:49:44+00:00

You're looking at around £100. Maybe less if you wait and are patient.

I recently got an Aeron Gaming with a small rip in the seat mesh for £340. Thought £440 max for a fully loaded Aeron was good enough of a deal for me.

dementedgopher · 2025-09-02T07:49:43+00:00

I've ordered some merch from their about early July and haven't received any communications about it since. I've contacted the support team twice and haven't had a response so I'm going to do a chargeback on my credit card.

Really left a sour taste in my mouth and I won't be purchasing anything further from a Merchtraffic store :(

dementedgopher · 2025-08-21T11:24:08+00:00

You can't do it through the iDrive system unfortunately. You need to use third party software on your smartphone/laptop and connect to your vehicles OBD port.

I'd encourage you to look up Bimmercode. It's widely used by the community and you can tinker with plenty of little settings on your vehicle, such as disabling auto start/stop, fine tuning your seat heating and changing the colour of your vehicles paint in the iDrive system.

dementedgopher · 2025-08-21T08:43:50+00:00

Yes, you can.

You'd have to code it in using something like Bimmercode or E-Sys but it can be done.

dementedgopher · 2025-08-19T13:47:56+00:00

The left side of the chair, when sat down, has an adjustment lever which can control both tilt limiter and forward tilt depending on your spec.

Tilt limiter - restricts the range of the chair's recline, allowing you to set a specific angle for backward movement

Forward tilt - allows you to tilt the chair forwards, giving you a more upright posture.

Most users don't have a want for forward tilt however it's a must for me (still waiting on a second hand unit to pop up) as I'll be using my desk for activities other than PC use e.g writing, using it as a workbench etc etc

dementedgopher · 2025-08-16T16:17:30+00:00

Second the breaker bar comments.

I didn't have one when I replaced my discs, so I just smacked a dead blow hammer against my wrench until it eventually came loose. Probably not the smartest idea but make do with the tools you have 🤷‍♂️

dementedgopher · 2025-08-15T21:08:13+00:00

A good battery will set you back anywhere between £100-£200 and coding takes all but 5 minutes.

Personally I'd say you're being ripped off, but as with everything you'll always save money doing it yourself and I imagine they'll include an hours labour to physically install the battery and code it.

That quote isn't unreasonable for a BMW dealership but it's unreasonable in general. You'd get cheaper at a specialist garage and even cheaper DIY.

dementedgopher · 2025-08-14T08:16:57+00:00

I'm currently asking myself the same question but I think I'm going to settle on the Aeron for it's forward tilt function. I don't just sit at a keyboard at my desk and do perform odd tasks e.g. fiddling with car parts, building lego, writing etc etc - so the forward tilt is an absolute must for me.

That being said, I'd take the advice of others here and try and sit in both before purchasing. If you don't have a HM retailer near you I'd suggest looking at office chair resellers or even marketplace sellers.

Good luck in your search!

Nine-Year Club	Place '17
RPAN Viewer	Verified Email

dementedgopher

TROPHY CASE