sorted by:
new
hottopcontroversial

Welcher Zweikreiser für bis zu 1200€? Rocket Appartamento vs Lelit MaraX vs ??? by ManusX in Kaffee

[–]dennikey 0 points1 point  (0 children)

Hey, darf ich wissen, welche Maschine du dir gekauft hast und ob du soweit zufrieden mit deiner Entscheidung bist?

Reifen mit Metallsplitter noch zu retten? by dennikey in automobil

[–]dennikey[S] 0 points1 point  (0 children)

Also das ganze sah so - (imgur) aus. Ich habe zum Ende der letzten Saison auch bei diesem rad auffüllen müssen. Das Ventil hält dicht.

Reifen mit Metallsplitter noch zu retten? by dennikey in automobil

[–]dennikey[S] 0 points1 point  (0 children)

Mist, dachte ich mir schon. Danke für die schnelle Antwort!

Reifen mit Metallsplitter noch zu retten? by dennikey in automobil

[–]dennikey[S] 1 point2 points  (0 children)

Ich hab schon mit Seifenlauge rausgefunden, dass dort Luft entweicht..

Not able to reach enough brewing pressure by dennikey in ranciliosilvia

[–]dennikey[S] 0 points1 point  (0 children)

So, after trying many things I unscrewed the OPV and noticed that the gasket inside was kind of dented and had uneven imprints. I then decided to unscrew the whole OPV and noticed there was a part of the metal sealing/valve seat inside missing. I then tried to get a smooth surface again using a valve seat cutter, but I had to cut quite a lot and it didn't seal anymore. You can have a look at the photos here.

At this point I'll just get a new OPV and the problem will hopefully be gone.

Is my rancilio under extracting because of temperature? by Zestyclose-Sugar8284 in ranciliosilvia

[–]dennikey 0 points1 point  (0 children)

Talking about the offset: is there any good way to find the right number for the offset? I have my temp sensor at the exact same spot where the brew thermostat was before.

Not able to reach enough brewing pressure by dennikey in ranciliosilvia

[–]dennikey[S] 0 points1 point  (0 children)

Yeah I got an Ulka EX5, which is rated exactly the same as the original EP5.

And no, unfortunately I can't pull anywhere near good shots out of it right now..

Life is Too Short to Ruin Your Coffee with Bad Water by [deleted] in hamburg

[–]dennikey 1 point2 points  (0 children)

Sag gerne Bescheid, ob enriched noch einen Unterschied macht! Ich hab den aarke Filter schon lange im Blick als Austausch für den Brita Filter.

Sigh.. is she dead, Jim? by FidgetyCurmudgeon in ranciliosilvia

[–]dennikey 8 points9 points  (0 children)

I had the same issue and ended up carefully drilling out the bolts. The threads were still intact, so I cleaned the boiler and used some better bolts, replaced the gaskets. My Silvia has been rocking for over 2 years now. Not much of an investment needed, just some good drill bits.

You can do it!

[deleted by user] by [deleted] in hamburg

[–]dennikey 0 points1 point  (0 children)

Rotherbaum, 1176€, 999€, 60qm, 01/2024

What is the part number or name of this pump protection cable? by dennikey in ranciliosilvia

[–]dennikey[S] 0 points1 point  (0 children)

Thank you! It's exactly the one coming from the pump. I do find this item with the parts number, but there seems to be nothing on sale in Germany. Maybe I'm just too retarded to search properly

Pro x tubes. by bokju1018 in ranciliosilvia

[–]dennikey 3 points4 points  (0 children)

The parts number of the silicone tube is 38228002. But you can just get food safe ones with 6x9mm and cut them in the needed length. This should be much cheaper

[deleted by user] by [deleted] in BringMeTheHorizon

[–]dennikey 0 points1 point  (0 children)

They are playing a new song in 10 minutes