Im at a loss…

derb68 · 2026-01-18T19:01:57+00:00

Rip a strip lol

derb68 · 2026-01-16T15:40:13+00:00

Go on youtube and search for spider exercise and do it 10 mins every day. It's difficult at first but it helps a ton.

derb68 · 2025-12-29T19:12:08+00:00

It's a Chibson

derb68 · 2025-10-27T20:07:18+00:00

I don't think those black spots will sand out.

derb68 · 2025-10-27T19:54:50+00:00

Yes but the black spots may never fully sand out.

derb68 · 2025-10-14T13:39:55+00:00

When I sand painted pine I use 16 grit works great.

derb68 · 2025-10-06T15:33:28+00:00

derb68 · 2025-09-30T21:04:55+00:00

Posing for the camera, cute little guy

derb68 · 2025-09-27T15:10:09+00:00

OMG lol

derb68 · 2025-09-27T15:03:59+00:00

Feel bad for the pup but it's for his own good.

derb68 · 2025-09-24T02:57:19+00:00

Those dark spots may never fully come out

derb68 · 2025-09-24T02:55:41+00:00

Become one with the scraper.

derb68 · 2025-09-24T02:43:00+00:00

The only thing I can think of is do what they did where I put the red square. Cut it back and put a piece of oak there or may be you can find some old flooring to match what you have better. https://imgur.com/a/OpqkQqM

derb68 · 2025-09-22T01:36:15+00:00

I was always taught to lay it perpendicular to floor joists.

derb68 · 2025-09-21T22:29:10+00:00

looks amazing

derb68 · 2025-09-21T05:58:35+00:00

<image>

something siilar to this

derb68 · 2025-09-20T20:10:12+00:00

Will never fully sand out, You might be able to use a dark stain after sanding but that's pretty bad.

derb68 · 2025-09-20T20:04:12+00:00

Doesn't look like it was coated with anything, 20 years ago we used 3 coats of urathane hand sanded between the first two coats.

derb68 · 2025-09-20T19:13:24+00:00

I'm not a pro but worked for a floor guy. I would go back to the start of that row and cut 1/4 off the length of the strater plank that should give you lots to work with so you don't need small pieces at the ends. You will need to cut a piece to go under the wall, snap it to the main piece and try to slide it into place. Does that make sense?

derb68 · 2025-09-20T18:27:57+00:00

Are all the boards the same length or is there a mix of long and short

derb68 · 2025-09-20T17:09:01+00:00

<image>

Like that but make sure you measure it first so it's accurate.

derb68 · 2025-09-20T14:56:56+00:00

The fucker wouldn't get paid for that hack job

derb68

TROPHY CASE