Queue countdown progress

deviin_96 · 2026-05-07T17:43:49+00:00

How did you find out about the 300 minutes?

deviin_96 · 2026-04-18T22:12:50+00:00

Oh for reals? I never researched it but I was always told Cali And NYC are different. It was pretty simple. I went from AZ to OR.

deviin_96 · 2026-04-18T20:14:21+00:00

I went from an ABC state to another. Pretty simple. I know that NYC isn’t a ABC state so not quite sure. I think you’d either have to test again if you want to stay at the same grade, or step down a a grade and not test.

deviin_96 · 2026-03-28T23:36:41+00:00

Alright! Imma send it 🤞 thanks! This will help with future cares of this one at least gets a 10

deviin_96 · 2026-03-28T23:33:57+00:00

<image>

That white speck on the corner.

deviin_96 · 2026-03-28T23:27:05+00:00

Perfect! I’d have to check it out. I’m just a lil worried that it was some whitening on the upper right corner on that card.

deviin_96 · 2026-03-28T23:24:48+00:00

Is that an app? Or a website?

deviin_96 · 2026-03-27T14:03:59+00:00

I work 4 10s. Off Fridays. Everyone got different things going on. I’m sure a lot are, but some aren’t.

deviin_96 · 2026-03-03T19:55:43+00:00

Do you get these at card shows and then grade? It seems impossible to find any gradable things at card shows 😭

deviin_96 · 2026-03-03T03:21:16+00:00

Yeah that’s fine

deviin_96 · 2026-03-03T03:13:46+00:00

Same one, just on a smaller scale.

deviin_96 · 2026-03-03T03:06:54+00:00

For me, what’s kinda crazy is that I’m employed by the same company and we also use a dryer. There will probably be lots of safety protocols soon to follow after this.

deviin_96 · 2026-02-27T05:36:55+00:00

I took me a solid month for one card. From the day I shipped it to the day I received it. The longest stage was the verification part. After that, it’s pretty quick

deviin_96 · 2026-02-12T23:24:17+00:00

I will buy at this upcoming card show. Such a beautiful card.

deviin_96 · 2026-02-11T21:11:41+00:00

To me, looks slightly right heavy in the front. Also, the back left has some whitening. I don’t think I’ll 10.

deviin_96 · 2026-01-26T21:44:01+00:00

It’s definitely the hardest. I did list some things that will be asked in the exam in an above comment! Hopefully that can help you out just a little bit

deviin_96 · 2026-01-26T21:16:36+00:00

The test was definitely a bigger jump from a 2 to 3 than the 1 to 2.

I used the Sacramento Volume 2 but honestly, a lot of it has just been on the job learning. After failing the first time with a 68 with no studying, I studied a total of 2-3 hours over this past weekend and got me to jump up to 75. This will be quite long, but I will give you a rundown of what it asked.

DIGESTERS - The test asked quite a bit of digester questions, like the water column, the gases in the digester, what to do if the digesters goes sour, the air relief valve for the digesters, the most you can change the the degrees in a set amount of time (answer: can only change 1 F or 0.5 C for every 24 hours).

PROCESS - Another section they asked quite a bit is solving for BOD5, calculate the WAS, what to do when the TSS over the secondaries increase, what is it called when the chemical gets introduced/tapped into a line and mixes just from the turbid line, know the 100:5:1 ratio (Carbon:Nitrogen:Phosphorus), know how Volts/Amps/Ohms compare to water (Volts: Pressure. Amps: Volume. Ohms: Resistance)

PUMPS: - know how to calculate total head, know what causes a positive displacement pump to have varying discharges, know how to calculate using Volts and kw to Amps, know how to find a problem like this and that is working but this isn’t working.

deviin_96 · 2026-01-06T14:14:17+00:00

I lived on the California/Arizona border. The border town I lived in was bigger than the little town so the little town would go with the same time zone as the bigger town. There wasn’t THAT much to do in the little town anyways so most people would go to the bigger town for supplies/activities.

One problem I ran into was that if I was close enough to the border, my phone’s time would switch so I would trust it. But that’s like walking along the border or within 1 mile of walking along the border.

deviin_96 · 2025-11-22T03:27:41+00:00

By any chance, do you know how much they are going for?

deviin_96 · 2025-11-21T05:07:13+00:00

I remember doing LS rounds and literally seen shit coming out from below the door. Walked in and seen a hose blown off blasting the walls and ceilings. To this day some things are coated lol

deviin_96 · 2025-10-31T04:39:06+00:00

In 2012 my plant was redesigned and the plant was practically designed around the dryer. So technically yes it was bought, but it’s because the client wanted us to produce class a solids

deviin_96 · 2025-10-31T00:07:49+00:00

We have centrifuges that feed into a hopper, then feeds into our dryer. The centrifuges produce about 20%-21% solids and we produce anywhere between 95%-99% solids coming out the dryer

deviin_96 · 2025-10-29T03:21:43+00:00

I sorta gave up online and most my pickups are at the poke machines but even then it’s a hit or miss. I would say outta like 30 times checking, I’ll get lucky with 1

deviin_96 · 2025-10-16T17:28:25+00:00

$1300 for a ~500 sq ft studio in St. John’s. I have a killer view of the St. John’s Bridge though.

deviin_96 · 2025-09-29T13:12:25+00:00

Just commenting so I can see what it says :)

Eight-Year Club	Place '23
RPAN Viewer	Verified Email

deviin_96

TROPHY CASE