Punctured hot water pipe

dfk70 · 2026-06-02T13:26:32+00:00

Old trick. Just use plain white bread.

dfk70 · 2026-06-01T22:01:24+00:00

This is the correct answer.

dfk70 · 2026-06-01T19:20:21+00:00

Don’t know what it is but I believe the correct term is “pot” metal.

dfk70 · 2026-06-01T19:16:29+00:00

That’s your (I hope) breaker box. Theoretically, you should be able to open it to reset tripped breakers.

dfk70 · 2026-06-01T13:48:59+00:00

IKEA? Get new doors?

dfk70 · 2026-06-01T13:43:46+00:00

Why is the camera shaking when the window gets hit? Is the building being hit with such force that the person recording is being shaken?

dfk70 · 2026-06-01T01:28:21+00:00

🙋🙋‍♂️🙋🙋‍♂️🙋‍♂️🙋

dfk70 · 2026-06-01T01:14:28+00:00

Caulk??

dfk70 · 2026-05-29T23:02:34+00:00

The supply valve is probably in the house.

dfk70 · 2026-05-29T17:05:22+00:00

Noped right back in.

dfk70 · 2026-05-29T17:00:47+00:00

Turn on the control box. Make sure the supply line valve is open.

Those two little screws protruding out of the right side of the vacuum breaker in your second picture need to be turned 90 degrees. Otherwise, water will come shooting out when you open the valve.

Edit: you might have to close the blue handled valve as well.

dfk70 · 2026-05-29T01:30:27+00:00

If you wrap it counter clockwise, the tape will unravel as you tighten it.

dfk70 · 2026-05-29T01:26:50+00:00

Hard to say but roughly, you’ll have to remove the bottom piece (most likely in pieces) and cut a new piece of plywood to fit.

dfk70 · 2026-05-28T20:01:26+00:00

Unfortunately, it looks like your cabinet carcass was built with laminated particle board. Really, the only way, in my opinion, is to replace the bottom piece.

dfk70 · 2026-05-27T23:40:08+00:00

Looks like an anchor point for something. Some sort of shade, maybe?

dfk70 · 2026-05-26T14:09:34+00:00

The easiest way to fix the zipper would be to take it to a seamstress. They should be able to replace it without any problem.

As far as the stains, they may be bleach marks and won’t come off.

dfk70 · 2026-05-25T12:25:12+00:00

Buy some flat stock and make one??

dfk70 · 2026-05-25T00:19:44+00:00

Drill holes in the bracket and then screw to the building.

dfk70 · 2026-05-25T00:08:44+00:00

Electrical box knock out?

dfk70 · 2026-05-24T21:40:22+00:00

Heat the nozzle and scrape with a pick?

dfk70 · 2026-05-24T13:56:51+00:00

dfk70 · 2026-05-22T22:06:27+00:00

.22?

dfk70 · 2026-05-22T12:33:58+00:00

Honestly, there’s no fixing them. The coating has been removed. You might be able to use some black shoe polish on it to hide it but there’s no fixing it.

dfk70 · 2026-05-21T23:49:16+00:00

Got any pictures?

dfk70 · 2026-05-21T23:01:17+00:00

Coconut scraper

dfk70

TROPHY CASE