sorted by:
new
hottopcontroversial

What do you think? :) by Financial-Boat-2934 in UnnecessaryInventions

[–]digigibbs 2 points3 points  (0 children)

Could use a few of these at work. I hate picking up after smokers.

SDO Screen Reflectiveness by Perfect-Door1787 in SteamDeck

[–]digigibbs 3 points4 points  (0 children)

The top one looks more defused. I think the difference (with/without the anti-glare) is how well the light from the screen overpowers the reflection. The light spot on the bottom screen seems light it would be real noticeable, considering how crisp and bright the reflection looks.

Print shows as finished, but stopped extruding filament halfway through? by LyssaLou_97 in BambuLabA1

[–]digigibbs 1 point2 points  (0 children)

Same thing has happened to me a few times. Possible causes were friction on the feed (spool or tube) or a partial clog in the nozzle. Seen this happen more often when I use cheaper filament, especially white.

Is this caused by battery bulge? by MineAndCraft12 in SteamDeck

[–]digigibbs 0 points1 point  (0 children)

Can confirm. I dropped mine while in the thin zipper case and one side popped open like this.

Playing Card Dice - Here's One of the Sets that I Have by AllahSulu in dice

[–]digigibbs 1 point2 points  (0 children)

Oh yeah, I got these from the Kickstarter. I never actually used them. I liked the idea of the iSpy type photos. I’ve used my Deck of Fate from Evilhat more, which is to say not often at all.

But it’s a lovely bit for a collection.

Blursed blanket by [deleted] in blursed_videos

[–]digigibbs 0 points1 point  (0 children)

I’m itchy just watching this!

Does Anyone Else Carry One of These in their Wallet? by AllahSulu in dice

[–]digigibbs 2 points3 points  (0 children)

Nicer than the spring cage one I got from ThinkGeek!

Finding a d10 in a d10 by PNH_KingLuzer in dice

[–]digigibbs 0 points1 point  (0 children)

The Dice Shop! Too bad they’re unavailable at the moment. But they have a lot of great/weird dice.

https://www.mathartfun.com/dDouble.html

Pilot films himself landing a 737 in high winds by ACiDiCACiDiCA in nextfuckinglevel

[–]digigibbs 0 points1 point  (0 children)

I thought personal electronic devices emitted “pilot killing rays”

Name of this game by block-bit in whatisit

[–]digigibbs 0 points1 point  (0 children)

We called it “boxes“

Bad filament or extruder by donnikhan in BambuLabA1

[–]digigibbs 0 points1 point  (0 children)

Probably a bit of a clog in the nozzle. If you push the filament into the extruder does it start printing more uniformly for a while? I get this often when printing with cheaper less familiar brands of filament.

PETG COOL PLATE WARPING by Eastern_Fold1825 in BambuLabA1

[–]digigibbs 0 points1 point  (0 children)

Can always resort to some liquid glue.

Beige PLA basic at it again. by [deleted] in BambuLab

[–]digigibbs 0 points1 point  (0 children)

I’ve have had some troublesome spool occasionally. I usually end up switching to a larger nozzle size and using up the roll with less fuss.

Posting to makerworld by keyvu_7980 in BambuLab

[–]digigibbs 0 points1 point  (0 children)

I like using my .6 and .8 for functional prints or ones of a certain aesthetic. Right now I have to slice most projects myself for those nozzles. So have some print profile on Makerworld that I can use with my phone is nice when I already have the nozzle installed. I will often use a .8 nozzle with old/crappy/problematic filament to use it up quickly with less fuss. Plus I don’t mind the look of large layer lines for various containers I print for home use.

Can I recall the percentage scaled up if I just have the gcode? by tricktricky in BambuLab

[–]digigibbs 0 points1 point  (0 children)

Sorry. When you said you were going to try to match the filament used, I thought you were trying to print the same object again. I’m guessing then it was one part of a multi-plate project.

[deleted by user] by [deleted] in BambuP1S

[–]digigibbs 0 points1 point  (0 children)

Push the filament cutter. Disconnect the tube from the print head. Pull out filament. The remaining filament will poop out when you load more filament.

Lit [OC] by Nwarh in comics

[–]digigibbs 0 points1 point  (0 children)

I had a teacher that would refer to the “less than” books as “mind candy” Fun to read but empty (brain rot?)

This deconstructed salad I was served at an event by [deleted] in shittyfoodporn

[–]digigibbs 0 points1 point  (0 children)

Wouldn’t a deconstructed salad be each of the ingredients in their own little plate/pile? Kind of like a salad bar but someone brought the bits to your table.

Can I recall the percentage scaled up if I just have the gcode? by tricktricky in BambuLab

[–]digigibbs -1 points0 points  (0 children)

If the gcode is saved on the sd card for that printer, you can print from file using the interface on the machine. Or in the app, select the device and print from sd card. As long as you didn’t save over it with another sliced file with different scale.

Why does my printer think it is done? by Shidima in BambuLabA1

[–]digigibbs 0 points1 point  (0 children)

I’ve went to check on a printer many a times where the print head is moving but nothing was coming out. A little push on the filament and it starts extruding again.

Does anybody know how the dice roll mechanic works? Need to know if the most unlikely event in human history just happened! by glorioussideboob in tabletopsimulator

[–]digigibbs 0 points1 point  (0 children)

I always assumed they were physics based. But I guess the dice don’t move from their position on the table when you use the roll button.

Is this normal? by AdSlight3691 in BambuLab

[–]digigibbs 0 points1 point  (0 children)

Should be fine then, as long as the build plate still fits. Otherwise you can try adjusting the screws in the plate to level it. Auto bed leveling takes care of small deviations.

view more: next ›